20 Most Recent E-Machines T3418 PC Desktop Questions & Answers

then you need to replace it.

1. Usually there are 3 pins, and you put the jumper on 2 of them to clear CMOS, then return them to the other 2 for normal function. 2. What you're describing seems more like a dead motherboard battery. Replace it and the computer should hold the time and date.

Hi dustin b709..
Go to the following webpage and download your FREE audio driver for your T3418.
Please take time to rate me

http://support.gateway.com/us/en/emac/product/default.aspx?tab=1&modelId=1568

use this website below to find the needed drivers for your network card which is free
Just type in the Emachine name and model number first then click on the SEARCH icon

http://www.driverguide.com/

How to reset you bios password.

Step 1: Power off you computer and unplug power cable.

Step 2: Open the computer case so that you can see the motherboard.

Step 3: Find the 3 pin jumper on your motherboard and put it on the other pin. Ex: If it is on 2 and 3 you will want to put it on 1 and 2.



Step 4: Plug your power cable back into you computer and turn it on. (Note: Your computer will not load you operating system.)

Step 5: Shutdown your computer and unplug it again.

Step 6: Put the jumper back into it original position.

Step 7: Plug your power cable back in and turn your computer on.

Now you bios password should be reset.

To enter the bios press the the F2 or Del key when your computer is turning on. (Note: This varies for different manufacturers.)

I hope that this helps you!
HelpDeskMan

If you were to log on to the manufacturer's web site, I think you will be pleasantly surprised as usually one is able to download, by model number, Customer Instruction Manuals, list of Dealers for spare part supplies and Driver downloads (if applicable) as required.

They are free of charge and the correct drivers.

I hope this helps.

if you look closely at your board --there are words on it by the connector pins that say what wires to connect to them

download hirons bootcd off google then burn it to a disc with free iso burner and follow instructions on youtube how to change password How To Reset Forgotten Password Windows Xp Vista 7 Hirens Boot

Try hitting <Windows>+<D>

Password is Chas2011

Hi Keith... here is all I could find on this machine, I assume this is how yours is set up. Component details are almost impossible to get on E-machine units, they just do not provide them.

• Processor Intel Celeron D 356 / 3.33 GHz
• Memory 512.0 MB / 2.0 GB (max)
• Hard Drive 120.0 GB - 7200.0 rpm
• Operating System Microsoft Windows Vista

First, you want to check to see if your proc even can be changed; many of E-machine procs are permanently attached to the motherboard and cannot be removed; this is the cheapest way to manufacture a computer, and E-machines is bottom of the line quality computer (no insult intended, just fact). Since I don't know what CPU socket the T3604 has I can't tell you if the Intel CPU would fit it. Next, I don't know what the Northbridge is running at; if it is less than 1066 there will be a bottleneck and there is no significant gain. At this point, I suggest that you not spend a lot of money on this, better to save and build your own computer. If you are a hardcore gamer looking for high framerates you really don't want this machine. Better to load in more RAM if you have no other options. Here is something I ran across: http://www.overclock.net/t/763634/what-to-upgrade-emachines-t3604 If I had the above details I could give you an answer.

www.dynamite.com might still sell what you want :> Just kiddding!Try a complete wiping of the hard-drive unless you are doing an upgrade, you will lose all data on the drive. If that doesn't work, you might not be running enough ram memory for 7 to run cleanly on you machiine, go ahead and upgrade.Hope this helps!

http://www.filehippo.com/software/antimalware/HERE DO YOU FIND FREE ANTIVIRUS-PROGRAM.

http://www.innovative-sol.com/drivermax/http://multimedia.softpile.com/multimedia+audio+controller+driver+windows+xp+sp2+free+download/here are two site's .one with a driverprogram,freeware.

I found the micro switch power button was broke on a lap top and also on a home computer in another sitution. I replaced the switch and all worked well again. On the lap top the internal spring in the switch was broke and in the home computer the switch would stick. This might seem as too easy of a fix in your case, but I would sure look at this possibility first. If it's not the power switch, all the past suggestion are in order. Good luck

Remove any DVDs or CDs from the optical drives and then unplug all peripheral devices except for the keyboard and mouse. Click the "Windows" button and then type "eMachines recovery management" into the search box. Click on "eMachines recovery management" in the results list and then click the "Restore" tab. Click "Password Settings" and then type a new password into the text box. Click "OK" and then click "Restore System to Factory Default". Type the recovery password into the "Password" text box and then click "OK". Click "Next" To start the recovery process. Click "Finish" and then wait for your computer to restart. This procedure could take several minutes. Once your computer has restarted, you'll be prompted to create a new user account, enter the date and time and set up the internet settings. or if you are running XP If you set your machine back to eMachines factory settings, it might help you for a short while but if you don't have effective virus protection your problems will return in short order. You should get rid of this virus with an effective virus remover. You can run Bitdefender's free online scan which doesn't need to be downloaded http://www.bitdefender.com/scan8/ie.html If you know when you got the virus, you can do a system restore to a time before the virus was on your system. This article tells you how to run it from safe mode http://bertk.mvps.org/html/safemode.html Your best protection in general is a complete internet security suite such as Bitdefender or Norton internet security 2009. More information here http://www.ask-the-computer-doc.com/comp... If you need to totally rebuild your system and you don't have a recovery disk, contact eMachines to get one. You might also try a Windows repair install if you have the operating system disk. Follow the directions here for XP http://www.michaelstevenstech.com/XPrepa... Source(s): http://www.ask-the-computer-doc.com/comp... Hope this helps.