20 Most Recent Lanzar VIBE266 Car Audio Amplifier - Page 5 Questions & Answers

try a different amp and see how long it last. try an amp that is a different amp and double check your wiring.

I guess your power supply got fried, Mosfet power supply that should has a Mosfet part number IRFZ44, or HFP50N06 type, also you will have to check power output devices for shorted outputs, hope it helps...

are you running your power cable next to the amp receiving line if so your catching interference,they should be ran on different sides of the car check.Also check for proper grounding make sure its bare metal your ground is going to

Check the ground. Also, you may have a dip in the volts that are powering the amp. If you have a multimeter, test the power wire, you should get between 12 to 14 volts. If it dips much lower than this, it will trip your protection.

0000

Hi,

Please check out the complete documentation in the bellow link for the following:

http://frye.com/manuals/6500.pdf

Thank You

check your ground for your amp most of the time this is the problem i just went threw this took it out of my truck put in my girlfriends to make sure it wasnt my amp sure enough its my ground also check the remote wire

Unless you can troubleshoot down to component it will cost you more money to get it fixed by someone or company.
Probably be cheaper to get another amp. Not to mention you need tools to remove the broken component and find the part to replace it. Too time consuming and expensive to fix!

Make sure that the remote switch is activated by the head unit so that the relay trips to contact making the amp come on.
SO make sure you have the auxillary power to switch on, use a multimeter to check the + 12 volt when the head unit is switched.
If there is power and still the amp is not working check onthe main fuse or the relay drive inthe amplifier.

your detacable from what?? need more detailed info, what is this a radio, please clarify, thanks