Setting the Digital In Assignment This setting assigns the digital input jacks of the AVR-2105/885 for the different input sources.12Select the digital input jack to be assigned to the input source. T o select the digital input jack T o select the input sourceSelect OFF if nothing is connected.19 COAX CDNOTE: PHONO, TUNER and V. AUX cannot be selected.3Press the ENTER or (down) button to enter the setting and switch the Component Video input setting.Setting the Component In Assignment This setting assigns the color difference (component) video input jacks of the AVR-2105/885 for the different input sources.1Select the component (Y, PB/CB and PR/CR) video input terminal tobe assigned to the input source. Component video terminal selection2 Input source selectionSelect OFF if nothing is connected.23 VIDEO1 DVD3Press the ENTER or (down) button to enter the setting and switch the Video Input Mode setting.NOTES: When you adjust the channel levels while in the TEST TONE mode, the channel level adjustments made will affect all surround modes.Consider this mode a Master Channel Level adjustment mode. You can adjust the channel levels for each of the following surround modes: DIRECT, STEREO, STANDARD (DOLBY/DTS SURROUND),5/7 CH STEREO, MONO MOVIE, ROCK ARENA, JAZZ CLUB, VIDEO GAME, MATRIX and VIRTUAL.29ENGLISH