20 Most Recent Hoover Nextra 160 HNWF 3137 Front Load Washer / Dryer Questions & Answers


hi my hoover front loader doesn,t fill. water in the machine I dont know what to do.any one help me thanks

Hoover Nextra... | Answered on Sep 09, 2014


sounds like the door lock mechanism. if this cannot signal it has engaged, to the board, no other function will work (you don't want the washer going with the door open, trust me :) )

Hoover Nextra... | Answered on Nov 11, 2013


were is the filter located on hoover 1300 washer dryer

Hoover Nextra... | Answered on Jan 22, 2013


you probably need new carbon brushes on main wash motor . which off at wall and unplug . remove motor and check carbons .If you cannot do this your self call your local engineer .

Hoover Nextra... | Answered on Jul 30, 2012


REPLACE HEAT ELEMENT TO SOLVE DRYER PROBLEM

Hoover Nextra... | Answered on Jul 30, 2012


Hi from retired Englishman in SW France,
I would gently suggest as a first step that you clean the drain motor lint tray/filter. So many 'faults' are caused by blocked filters and many machines will not even go to spin or release the door lock if there is any water still left inside.
Here are my complete guidance notes for checking both the drain motor filter and the drain motor ;-0)
-------------------------------------

If you are unsure where the filter is, it is often behind the front lower (kick) panel (or in some machines at the rear in an awkward position!) and most are held in by a round cover/knob. Sometimes the filter will not come out with the cover and you will have to persuade it to come out to play!

REMOVE POWER AND ENSURE YOU HAVE A WATER RECEPTACLE/RAGS TO SOAK UP THE WATER WHICH IS BOUND TO POUR OUT!
It's surprising what people have found in theirs! It is always worthwhile checking it on a regular basis.
Now- whilst the filter is removed it is normally possible to see the drain motor and ensure it is not jammed by a foreign object such as a needle or a toothpick. It should be able to be turned by hand/finger- the power IS OFF!
At this point it is also possible to test if the motor works. No clothes or water in the machine, select a spin cycle and put the power back on. You should be able to see the motor turning at some point, possibly straight away. Using something suitable like a glove see if it is easy to briefly slow the motor down. If it is easy then the motor is malfunctioning!

Please score this solution accordingly and good luck!
John C

Hoover Nextra... | Answered on Apr 10, 2011


Hi,
Here is a tip that I wrote about dryers and noises...

It will help you determine what is happening there...

Dryer Repair Squeaks, Grinding, Clicking and Knocking Noise


heatman101


tukuymhg

Hoover Nextra... | Answered on Sep 29, 2010


Check the heating element Should read 28 ohms on a multimeter if shows open circuit. no reading then replace...

Hoover Nextra... | Answered on Jun 06, 2010


Either your heating element went out or your thermostat (which regulates the temp).

Hoover Nextra... | Answered on Jan 30, 2010


if its' drum you are talking about, then its outside enclosure of your rotating perforated drum.

Hoover Nextra... | Answered on Nov 05, 2009

Not finding what you are looking for?
Hoover Nextra 160 HNWF 3137 Front Load Washer / Dryer Logo

Popular Tags

39 questions posted

Ask a Question

Usually answered in minutes!

Top Hoover Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1466 Answers

shaun taylor

Level 3 Expert

1525 Answers

Are you a Hoover Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Hoover Washing Machines

  • Hoover Washing Machines

Most Popular Question

machine drum not turn wash or spin

  • Washing Machines
Loading...