http://www.fixya.com/support/p416528-ariston_technologies_aw_149_na_washerSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comTue, 08 Dec 2009 08:33:32 GMT80http://www.fixya.com/support/t747521-ariston_1635_margherita_washing_machineIt does not matter which programme I select, the programme switch just keeps clicking round. It may stop on another programme but never starts to carry out the programme. I have tried some of the advice on this site e.g switch off put to black/red...Tue, 08 Dec 2009 08:33:32 GMThttp://www.fixya.com/support/t155328-ariston_washing_machine_a1636_flashingThe machine will start filling with water and then start emptying, then two lights starts flashing along with the power light. The manual said its a computer error, is there anything I can do to fix this? Please advise Many thanksTue, 08 Dec 2009 08:33:32 GMThttp://www.fixya.com/support/t342333-ariston_a1636_washing_machineI have the same problem superwash and rapid lights start flashing on the last rinse then machine stops ariston A1636 wonder if this is a common fault in them if so i reckon they should recall them hvent had mine 2 years yet but got no extra cover : (Tue, 08 Dec 2009 08:33:32 GMThttp://www.fixya.com/support/t414737-ariston_margherita_1635I had to stop my washer mid cycle because water was overflowing due to my sink outlet pipe blocked. Somehow I must have put the timer on a programme and it keeps turning and clicking and cannot get it to start again on a normal wash. Please can you...Tue, 08 Dec 2009 08:33:32 GMThttp://www.fixya.com/support/t162058-flashing_lights_ariston_a1636_progressHi, I have a couple of problems with my Ariston A1636 washing machine. When I put it on Program 1 (Pre-wash), the machine fills for about 30 seconds, then starts pumping the water out and the door lock light flashes and also the 'Super Wash',...Tue, 08 Dec 2009 08:33:32 GMThttp://www.fixya.com/support/t194539-kenmore_elite_he3_front_loading_washerI have had alot of trouble with this washing machine. I have had it for a 1&1/2 years. First the rubber around the door went out and now on of one of the plastic things connected to the steel drums broke off. It is suppose to be such a great washer...Tue, 08 Dec 2009 08:33:32 GMThttp://www.fixya.com/support/t196869-maytag_stops_any_cycle_after_warmHi, The washer stop in the middle of cycles after a while (usually in the second wash). Even if the cycle is changed it doesn't do anything. After couple of days and after the machine is disconnected you can use it again and it works fine but only...Tue, 08 Dec 2009 08:33:32 GMThttp://www.fixya.com/support/t198529-replacing_fins_duet_whirlpool_washerI am trying to replace the plastic fins inside the drum of my whirlpool duet washer. I have the parts, and it is officially clled the drum baffle kit. I have a picture of how to install it, but how do I get to the drum? From the picture it looks...Tue, 08 Dec 2009 08:33:32 GMThttp://www.fixya.com/support/t198784-kenmore_top_loading_washing_machineabout every 5th load of laundry the spin cycle, prior to finishing, will not go into spin. The machine rinses and then just sits there as if it is waiting on a signal to begin spinning. Once the time period for the spin cycle completes the washer...Tue, 08 Dec 2009 08:33:32 GMThttp://www.fixya.com/support/t199234-maytag_frontload_washer_door_leakinghi...i have a maytag frontload washer and there is a lot of water and suds leaking out the bottom and sides of the door. it is a circular clear door. inside there is gray stretchy lining around the door and this wire circle with a spring at the top...Tue, 08 Dec 2009 08:33:32 GMThttp://www.fixya.com/support/t200244-f_06_failure_light_kenmore_eliteKenmore HE Elite gets through half the cycle and F-06 signal goes off. I tried to drain/spin and F-06 goes off again. The main control board was replaced 5-07; after similar problems occurred. I don't want another $400 bill to get the washer...Tue, 08 Dec 2009 08:33:32 GMThttp://www.fixya.com/support/t200524-bosch_washing_machineWe replaced the pump, and it has been working fine for about a month. Now the machine is tripping all the house electrics as soon as it is switched on.Tue, 08 Dec 2009 08:33:32 GMThttp://www.fixya.com/support/t200684-washer_machine_drains_while_fillingI just received a used whirlpool washer maching..I tried to see the model # but it looks like it has been "wiped" off of it... It drains as it is filling. The spin and rinse cycle work. I tried raising the hose to 39" like I read somewhere, but that...Tue, 08 Dec 2009 08:33:32 GMThttp://www.fixya.com/support/t200789-problem_indesit_we16My indesit we16 keeps on saying door on the lcd screen about 3 mins after i try and start it. I changed the door interlock but this has not resolved the problem. Can anyone help?Tue, 08 Dec 2009 08:33:32 GMThttp://www.fixya.com/support/t202424-washing_machine_not_filling_water_notAt the start of washing cycle nothing happens at all.Machine does not fill with water and when you manually advance dial to further into wash mode machine starts to spin.It does not rinse in (rinse /spin) cycle but spins only and of course when dial...Tue, 08 Dec 2009 08:33:32 GMThttp://www.fixya.com/support/t204689-washing_machine_not_getting_cold_waterNot getting cold water. I think it might be the cold water solenoid. If this is the problem, how big of a job is it to replace the soleniid and where can get the parts and instructions. Estate TAWB600EQ Washing Machine.Tue, 08 Dec 2009 08:33:32 GMThttp://www.fixya.com/support/t206124-split_in_plastic_bowlHello God knows how, but i have developed a small split in the plastic bowl, that the stainless steel bowl inside my washing machine sits in (LG Turbo Drum 6.5kg). The split is causing a leak and water is running out onto my floor. Is this...Tue, 08 Dec 2009 08:33:32 GMThttp://www.fixya.com/support/t205424-whirlpool_duet_sport_washerTWO WEEKS OLD!!!! Stopped it mid cycle, would not re-start. Flashing F-01Tue, 08 Dec 2009 08:33:32 GMThttp://www.fixya.com/support/t208779-kenmore_washing_machinemy machine will not spin the timmer stops when it reaches the spin cycleTue, 08 Dec 2009 08:33:32 GMThttp://www.fixya.com/support/t209314-washing_machineHi, my washing machine will not agitate or spin. It pumps out water, the motor works, belt is good, nothing seized up, lid switch has continuity when depressed. During what should be a spin cycle the motor is rotating the pullys, there is an assembly...Tue, 08 Dec 2009 08:33:32 GMThttp://www.fixya.com/support/t213099-kenmore_washer_drain_pump_not_comingFills fine, agitates, gets to drain cycle and nothing happens- no noise from the pump- more common pump problem or timer problem?Tue, 08 Dec 2009 08:33:32 GMThttp://www.fixya.com/support/t214844-candy_washing_machine_fills_water_whenThe washing machine seems to work no problem, washes, spins and empties. Yet when left for a while, I come back to open the door and it is at least half full of water. It did this once before, while still under warrenty, but stopped doing it just as...Tue, 08 Dec 2009 08:33:32 GMThttp://www.fixya.com/support/t236284-ge_washing_machine_water_overflowingGE model: s3700e1ww (top load washing machine)last week the washing machine did not stop filling with water in the rinse/spin part of the cottons cycle and flooded the laundry room and hallway before we noticed. It would not stop when we pushed the...Tue, 08 Dec 2009 08:33:32 GMThttp://www.fixya.com/support/t238509-lw8303w2_belt_replacementI'm trying to change the belt.? I have motor unit out and the screws removed from the pump.? Can't seem to get the pump off.? Does it come apart? Thanks, EricTue, 08 Dec 2009 08:33:32 GMThttp://www.fixya.com/support/t239959-non_spinning_washerMy washer will not spin on it's own. We replaced the drive belt. After we replaced the belt we reconnected everything and tested. It spun for 5 seconds, creaked, and then quit. The belt was warm to the touch. When I tried to turn the tub manually the...Tue, 08 Dec 2009 08:33:32 GMThttp://www.fixya.com/support/t247504-amana_commercial_washermy friend transported a used amana commercial quality washer and dryer on its side. the washer doesn't work on the wash cycle at all. can you help? ChuckTue, 08 Dec 2009 08:33:32 GMThttp://www.fixya.com/support/t249329-nexxt_100_series_washerI recently purchased a front load washing machine. We are finding when we have towels washing that the washser freqently stops, the start button beeps until someone presses it. I just finished a load and this occurred 5 times. The wash has a mixture...Tue, 08 Dec 2009 08:33:32 GMThttp://www.fixya.com/support/t250054-kenmore_elite_calypso_drainI heve ths Kenmore Elite clothes washer that has worked fine for two years. Today it did not drain when the cycle was finished. It is showing the code CA and I do not have the book anymore. Does anyone know what this might mean? It is also...Tue, 08 Dec 2009 08:33:32 GMT