http://www.fixya.com/support/p41630-hoover_al130_front_load_washerSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comThu, 24 Dec 2009 19:10:31 GMT80http://www.fixya.com/support/t446041-high_vibration_front_loadermy hoover AL 130 washing machine vibrates badly when loaded, like the load is off centre. It does not so this when run empty. I have checked the springs and dampers and they look fine. I also would have thought it would still have the problem when...Thu, 24 Dec 2009 19:10:31 GMThttp://www.fixya.com/support/t171729-washing_machine_faultWe have a Hoover AL130 washing machine. This week it started having a noisy spin, which I tracked down to a loose bolt through the bottom piece of concrete. I fixed that, gave it a quick spin to test, and then pushed the machine back under...Thu, 24 Dec 2009 19:10:31 GMThttp://www.fixya.com/support/t1016972-washin_machine_spinning_problemHi I have a whirpool integrated washing machine, a couple of weeks ago a loud noise started at the spinning stage but now the drum has completed stopped from working. I opend the back of the machine and I found the belt came off I didn't want to put...Thu, 24 Dec 2009 19:10:31 GMThttp://www.fixya.com/support/t807616-not_heating_cold_waterWHEN THE MACHINE IS PUT ON A HOT WASH IT IS NOT HEATING THE WATER.IT IS WASHING EVERYTHING COLD.Thu, 24 Dec 2009 19:10:31 GMThttp://www.fixya.com/support/t182111-hoover_six_express_wdm130_1300_washerMy washer dryer will not dry clothes, i am assuming the water is hot to wash the clothes as it reaches the end of the cycle fine (am told if water was not heating it would not rinse or finish cycle)am unsure of whether there is a reset button inside...Thu, 24 Dec 2009 19:10:31 GMThttp://www.fixya.com/support/t225763-machine_boils_waterMy Hoover AL120 washer, will boil the water during a 40 degree cycle so steam comes out of the detergant drawer. I have changed the temp sensor at the back of the drum - the problem is still ongoing.Thu, 24 Dec 2009 19:10:31 GMThttp://www.fixya.com/support/t370159-instruction_manualI've lost my AL 130's Fast Iron Instruction Manual. Can I download it on the Web? If not, where can I buy a replacement? Peter BrewisThu, 24 Dec 2009 19:10:31 GMThttp://www.fixya.com/support/t324323-drum_bearing_replacementHi I have just purchased a drum bearing "kit" (2 bearings and a seal) for my washer. With the belt removed, when I spin the drum it makes a "grumbling" sound, so I am pretty sure its the bearings. The outer drum is polypropylene I understand I have...Thu, 24 Dec 2009 19:10:31 GMThttp://www.fixya.com/support/t121384-water_stop_heating_upWhen the machine is in the wash cycle the water is constantly heating up to extremely high temperatures, the machine is incredibly hot to the touch. This has happened intermittently in the past but now happens with every wash. Can anyone help...Thu, 24 Dec 2009 19:10:31 GMThttp://www.fixya.com/support/t179990-rinse_problemthe machine wash cycle stops at the rinses. only by clicking the programmer forward can we get the rinses to start. has anyone had a similar problem and does anyone have a solutionThu, 24 Dec 2009 19:10:31 GMThttp://www.fixya.com/support/t190737-hitachi_sf_h900tpx_washing_machine_notMy Hitachi SF-H900TPX Washing Machine has suddenly stopped washing / Spin Dry... It will fill the water to the correct level, but will not start to wash. If I then try to use the Spin selection, it will only drain the water out, but it wqill not...Thu, 24 Dec 2009 19:10:31 GMThttp://www.fixya.com/support/t191557-g_e_washer_fills_slow_2nd_rinsemodel #wcse3100a1ww fills very slowly on 2nd rinse. i have cleaned all filters and replaced valve assembly. is the control asembly now the problem? how can i test it iThu, 24 Dec 2009 19:10:31 GMThttp://www.fixya.com/support/t192117-maytag_top_load_washer_leakI have a maytag top load washer, about 15 years old. Once the washer fills, water still drips from the fill slot through all cycles, including the spin cycle. Even when the washer is turned off, it still drips.Thu, 24 Dec 2009 19:10:31 GMThttp://www.fixya.com/support/t192365-hotpoint_aquarius1100_electrical_probmy machine has just been moved from one house to another 4th floor flat today,and upon using it it seemed to work fine then it tripped the switch on that circuit ,it then seemed to work fine to just spin if i put it on that part of the cycle.now...Thu, 24 Dec 2009 19:10:31 GMThttp://www.fixya.com/support/t193197-hotpoint_washerHi i have a 1987 hotpoint washing machine i have something stuck in the adjetator how do i get the adjetator off?Thu, 24 Dec 2009 19:10:31 GMThttp://www.fixya.com/support/t194153-hoover_600m_washing_machine_cycle_issueOur washing machine won't progress through it's normal cycle. The dial no longer moves or clicks through to the next step in the washing cycle.Thu, 24 Dec 2009 19:10:31 GMThttp://www.fixya.com/support/t194539-kenmore_elite_he3_front_loading_washerI have had alot of trouble with this washing machine. I have had it for a 1&1/2 years. First the rubber around the door went out and now on of one of the plastic things connected to the steel drums broke off. It is suppose to be such a great washer...Thu, 24 Dec 2009 19:10:31 GMThttp://www.fixya.com/support/t195457-washing_machineI recently moved into a fully furnished flat (renting). The place has a LG Direct Drive 7 3.5kg. I'm not sure how to use this machine, so I'm trying to find the manual for it....Thu, 24 Dec 2009 19:10:31 GMThttp://www.fixya.com/support/t196497-hoover_elite_930_top_loader_washingAs the machine goes into the rinse cycle the cold water solenoid does not activate, it does activate in other cycles, such as filling up at the start.Thu, 24 Dec 2009 19:10:31 GMThttp://www.fixya.com/support/t196807-front_panel_removalOpen door button is tuck. We are trying to remove the front control panel for access so we can un stick the buttonThu, 24 Dec 2009 19:10:31 GMThttp://www.fixya.com/support/t196869-maytag_stops_any_cycle_after_warmHi, The washer stop in the middle of cycles after a while (usually in the second wash). Even if the cycle is changed it doesn't do anything. After couple of days and after the machine is disconnected you can use it again and it works fine but only...Thu, 24 Dec 2009 19:10:31 GMThttp://www.fixya.com/support/t197645-used_kenmore_stackable_washer_dryer_p_nI bought a used kenmore stackable washer and dryer P/N 145781-000A. I wired an outlet for it in my condo. Since the plug has four prongs I installed a four prong outlet, but there are only three wires coming from the box: two 120v. hot wires and...Thu, 24 Dec 2009 19:10:31 GMThttp://www.fixya.com/support/t198529-replacing_fins_duet_whirlpool_washerI am trying to replace the plastic fins inside the drum of my whirlpool duet washer. I have the parts, and it is officially clled the drum baffle kit. I have a picture of how to install it, but how do I get to the drum? From the picture it looks...Thu, 24 Dec 2009 19:10:31 GMThttp://www.fixya.com/support/t199171-drain_pump_replacement_instructionI have a top mount Roper washer that's leaking from the Drain Pump (It's the only thing that's wet when i looked in the bottom). Is it possible to get a step by step instruction on replacing the pump?Thu, 24 Dec 2009 19:10:31 GMThttp://www.fixya.com/support/t199347-miele_washing_machine_model_w713_front15 years old - no previous maintenance done Filters maintained clean. Problem: 1) machine leaks water underneath after completing wash & rinse cycle 2) always washes a very long time ( approx. 3 hours to complete) regardless of pressing short...Thu, 24 Dec 2009 19:10:31 GMThttp://www.fixya.com/support/t200789-problem_indesit_we16My indesit we16 keeps on saying door on the lcd screen about 3 mins after i try and start it. I changed the door interlock but this has not resolved the problem. Can anyone help?Thu, 24 Dec 2009 19:10:31 GMThttp://www.fixya.com/support/t204689-washing_machine_not_getting_cold_waterNot getting cold water. I think it might be the cold water solenoid. If this is the problem, how big of a job is it to replace the soleniid and where can get the parts and instructions. Estate TAWB600EQ Washing Machine.Thu, 24 Dec 2009 19:10:31 GMThttp://www.fixya.com/support/t205177-door_seal_hotpoint_9540How do I change the door seal (boot) on a Hotpoint 9540 washerThu, 24 Dec 2009 19:10:31 GMThttp://www.fixya.com/support/t206537-plastic_sleeveWater is pouring out of the plastic sleeve in the back of my washing machine. I am getting a ob code and a lf code as wellThu, 24 Dec 2009 19:10:31 GMThttp://www.fixya.com/support/t205803-washing_maching_not_taking_fabicHi, this machine is about 7 years old and work fine, except in the last couple of weeks it no longer takes in the fabic softner from the rinse draw. Apart from that everything is OK. Any idea on what's wrong?Thu, 24 Dec 2009 19:10:31 GMT