http://www.fixya.com/support/p41629-hoover_aaa140_front_load_washerSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comWed, 16 Dec 2009 17:26:30 GMT80http://www.fixya.com/support/t3533836-during_wash_cycle_water_purs_out_filterduring a wash cycle water pours out of the filter at the bottom of the machineWed, 16 Dec 2009 17:26:30 GMThttp://www.fixya.com/support/t426909-washing_machine_hoover_h100m_fills_muchHello. My washing machine keeps filling with water in the drum until it copletely full. Cleaned all pipes, pump, but nothing seems working. And I cannot find manual for it too. Can this problem be fixed? Many thanks.Wed, 16 Dec 2009 17:26:30 GMThttp://www.fixya.com/support/t2815838-m9503_washer_dryer_not_draining_beforeMy servis M9503 washer/dryer stopped during the spin cycle, the water didn't drain. I think my partner may have slightly overloaded it. I drained the machine by hand and no it stops after the spin cycle and doesn't dry. There is always an inch of...Wed, 16 Dec 2009 17:26:30 GMThttp://www.fixya.com/support/t2540819-when_turn_machine_turn_nob_put_washWhen i turn on the machine i turn nob to put wash onand all the lights coming on but nothing happening? If it lets water in it starts for two seconds thn all stops nothing happens.Wed, 16 Dec 2009 17:26:30 GMThttp://www.fixya.com/support/t2346723-empty_filterI have mislaid my manual and I urgently need to empty/drain filter. Many thanks.Wed, 16 Dec 2009 17:26:30 GMThttp://www.fixya.com/support/t2280796-water_in_machine_goes_9_hour_delay_trywater still in the machine. It is as if not finished programme by spinning. If move to just spin the machine then goes to 9hr delay light and does nothing. IT STILL HAS WATER IN IT AT THE END OF THE CYCLE AND THEN GOES ON TO 9 HOUR DELAY IF I TRY TO...Wed, 16 Dec 2009 17:26:30 GMThttp://www.fixya.com/support/t1640540-hoover_visionhd_drain1000 spin light & Timesaver light flashing, machine will not drain, checked filter and cleared, still no change,any help out there??Wed, 16 Dec 2009 17:26:30 GMThttp://www.fixya.com/support/t462962-hoover_logic_1300Hi My washing machine will not spin the full cycle, water is still left in the machine on on most wash cycles. Can someone help. ThanksWed, 16 Dec 2009 17:26:30 GMThttp://www.fixya.com/support/t208545-programme_lockHow on earth do you switch the Programme Lock off on a Hoover AAA140 washing machine?! The keypad is currently locked and I can not unlock it! Many Thanks MattWed, 16 Dec 2009 17:26:30 GMThttp://www.fixya.com/support/t1253048-hoover_800f_user_manualHi There, I would like to know if it is possible to get the user manual for the 800f!!... I havent figured out what all my numbers and letters mean!!!! ThanksWed, 16 Dec 2009 17:26:30 GMThttp://www.fixya.com/support/t1278822-noisy_servis_m9503sHi, Very noisy (grating sound), I think its the bearing. Is this a DIY job (I'm used to maintaining the car) ? Cheers, PaulWed, 16 Dec 2009 17:26:30 GMThttp://www.fixya.com/support/t861253-buying_rear_drum_bearing_hoover_aaa140The drum bearing is noisy. I have been to simco to try and purchase a replacement bearing but they only seam to be able to get hold of a whole rear tub assembly at ?180 (40004223). They only do a bearing seal ?16 (09028960). Does anyone know where I...Wed, 16 Dec 2009 17:26:30 GMThttp://www.fixya.com/support/t148339-hoover_aaa_140can anyone helpmy machine is coming up error 3 near the end of the cycle please let me know thanks a lotWed, 16 Dec 2009 17:26:30 GMThttp://www.fixya.com/support/t192173-motor_wont_spinhi how are you i have a hoover AAA140 washing machine. it was working fine till yesterday. it carries out all the procedures but it wont spin.when its on spin it makes noise but it wont spin.i have opened it from the back and the motor is not...Wed, 16 Dec 2009 17:26:30 GMThttp://www.fixya.com/support/t153088-washing_machine_fills_water_start_stopshoover 140 aaa washing machine starts off cycle by filling with water for about 20 seconds then everything stops and it shows up error 5. i don,t have my manual so have no idea what error 5 is. please help.Wed, 16 Dec 2009 17:26:30 GMThttp://www.fixya.com/support/t192365-hotpoint_aquarius1100_electrical_probmy machine has just been moved from one house to another 4th floor flat today,and upon using it it seemed to work fine then it tripped the switch on that circuit ,it then seemed to work fine to just spin if i put it on that part of the cycle.now...Wed, 16 Dec 2009 17:26:30 GMThttp://www.fixya.com/support/t194153-hoover_600m_washing_machine_cycle_issueOur washing machine won't progress through it's normal cycle. The dial no longer moves or clicks through to the next step in the washing cycle.Wed, 16 Dec 2009 17:26:30 GMThttp://www.fixya.com/support/t197645-used_kenmore_stackable_washer_dryer_p_nI bought a used kenmore stackable washer and dryer P/N 145781-000A. I wired an outlet for it in my condo. Since the plug has four prongs I installed a four prong outlet, but there are only three wires coming from the box: two 120v. hot wires and...Wed, 16 Dec 2009 17:26:30 GMThttp://www.fixya.com/support/t200789-problem_indesit_we16My indesit we16 keeps on saying door on the lcd screen about 3 mins after i try and start it. I changed the door interlock but this has not resolved the problem. Can anyone help?Wed, 16 Dec 2009 17:26:30 GMThttp://www.fixya.com/support/t204689-washing_machine_not_getting_cold_waterNot getting cold water. I think it might be the cold water solenoid. If this is the problem, how big of a job is it to replace the soleniid and where can get the parts and instructions. Estate TAWB600EQ Washing Machine.Wed, 16 Dec 2009 17:26:30 GMThttp://www.fixya.com/support/t206537-plastic_sleeveWater is pouring out of the plastic sleeve in the back of my washing machine. I am getting a ob code and a lf code as wellWed, 16 Dec 2009 17:26:30 GMThttp://www.fixya.com/support/t212405-help_needed_indesit_washing_machineDoor handle won't release door. lock light is off, handle lever moves but doesn't operate lock, lever doesnt return to closed position (broken spring?). How do you open this door in order to replace the mechanism?Wed, 16 Dec 2009 17:26:30 GMThttp://www.fixya.com/support/t213323-final_spin_cycle_kenmore_417_40042990My washer will not do the final spin cycle in any mode of wash, regular,perm press,etc. until I move the timer back to the begining of the final spin cycle after the initail cycle is over.The motor and timer have been changed.Wed, 16 Dec 2009 17:26:30 GMThttp://www.fixya.com/support/t214277-washing_machinelast night my washing machine tripped the electrics and there was a sort of burning smell. now the washing machine wont turn on at all. tried changing the fuse but that hasnt done anything. any ideas what the problem is? thanks :)Wed, 16 Dec 2009 17:26:30 GMThttp://www.fixya.com/support/t216017-washer_washes_but_doesnt_rinseOk, the washer works on all cycles to wash, and spin out, but wont fill for rinsing.. I stops and makes a low buzzing noise. If i pop the start in and out the water comes out, if i do it fast enough it begins filling like regular. Im so confused.....Wed, 16 Dec 2009 17:26:30 GMThttp://www.fixya.com/support/t217601-main_circuit_breaker_tripsDrum fills with water, before drum revolves powers gone.Wed, 16 Dec 2009 17:26:30 GMThttp://www.fixya.com/support/t224045-scrudI have a build up of grey waxy substance on the outer casing of my kleenmaid front loading washing machine bowl.? have run the machine about 6 times using very hot water and washing soda on some runs, bicarb of soda and vinegar and now dishwashing...Wed, 16 Dec 2009 17:26:30 GMThttp://www.fixya.com/support/t224717-drainageMy hoover hdb244-80 has water sitting in the bottom of the drum and will not drain...Wed, 16 Dec 2009 17:26:30 GMT