http://www.fixya.com/support/p41628-hoover_aaa160_front_load_washerSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comThu, 07 Jan 2010 07:42:04 GMT80http://www.fixya.com/support/t3135927-machine_washes_o_k_but_nt_spinmachine washes o.k. but does'nt spin dry (hoover soft wave auto - washer 1000 )Thu, 07 Jan 2010 07:42:04 GMThttp://www.fixya.com/support/t3421140-program_over_runningA wash cycle that normaly takes 40 mins or so takes much longer now. I have to stop the machine and go to another setting.Thu, 07 Jan 2010 07:42:04 GMThttp://www.fixya.com/support/t3381325-water_not_get_pumped_out_machinethe water does not get pumped out of my hoover performer washing machine. Is there a filter that can be checked? I thing it is at the bottom but cant seem to open it.Thu, 07 Jan 2010 07:42:04 GMThttp://www.fixya.com/support/t1262908-error_code_8_hoover_vision_hd_9_kgI emptied the machine and put in a new load. Chose the right program and temp. But it would not start. Then the machine would not respond when i try to choose a different program. The display shows: Washing. Done in 9h 4min. And then error code 8...Thu, 07 Jan 2010 07:42:04 GMThttp://www.fixya.com/support/t3340610-started_front_loader_electra_1000f_inI started my front loader Electra 1000F and in less than a minute the machine stopped and had tripped a switch in the fuse box. I put the switch on and the machine has resumed washing, but there is a horrible burning smell like burnt rubber.Thu, 07 Jan 2010 07:42:04 GMThttp://www.fixya.com/support/t3328347-hav_washer_dryer_problem_clothesI hav a washer/dryer - problem is: the clothes weren't drying properly and then 2 day when I used it just on the washing cycle, the clothes came out really wet.Thu, 07 Jan 2010 07:42:04 GMThttp://www.fixya.com/support/t3327251-washing_machine_will_not_spin_whenmy washing machine will not spin when loaded, it does spin when empty thou . whats wrong pleaseThu, 07 Jan 2010 07:42:04 GMThttp://www.fixya.com/support/t3062652-hoover_hnl_6166_6kg_aa_1600_washingHoover HNL 6166 6kg A+AA 1600 washing machine....smell of burning like burnt rubbber...........Thu, 07 Jan 2010 07:42:04 GMThttp://www.fixya.com/support/t2970098-stops_halfway_wash_cyclestops halfway through wash cycleThu, 07 Jan 2010 07:42:04 GMThttp://www.fixya.com/support/t2899700-hoover_nextra_mega_load_washingHELLO , I HAVE A HOOVER NEXTRA MEGA LOAD WASHING MACHINE 7.5KG AND INSIDE THE HANDLE THERE IS A LITTLE PLASTIC BIT YOU SQUEEZE IN ALONG WITH THE DOOR TO OPEN IT . THIS HAS BROKEN AND I HAVE A NEW PIECE TO REPLACE IT BUT WOULD LIKE INSTRUCTIONS ON HOW...Thu, 07 Jan 2010 07:42:04 GMThttp://www.fixya.com/support/t2880294-hoover_washing_machine_wont_spin_testedMy hoover washing machine wont spin. I have tested the motor and this is fine. What else could it be?Thu, 07 Jan 2010 07:42:04 GMThttp://www.fixya.com/support/t2685189-error_03ive got the same problem , the machine stops halfway through the cycle and displays e 03Thu, 07 Jan 2010 07:42:04 GMThttp://www.fixya.com/support/t2496786-aaa160_washing_machineHi, I have a Hoover AAA160 Washing Machine & theres water seeking from the bottom of the door, im thinking it's the seal, would this be right ?Thu, 07 Jan 2010 07:42:04 GMThttp://www.fixya.com/support/t2379663-will_not_startI moved and installed the machine in a new home. i want to start and the display says welcome and stays on welcome with the hour . no way to choose a program. ???Thu, 07 Jan 2010 07:42:04 GMThttp://www.fixya.com/support/t1866083-softener_not_going_in_machine_last_rinseDespite cleaning the jets and checking that there are no 'kinks' in the inlet hose at the back, the softener still won't go through the machine on the last rinse.Thu, 07 Jan 2010 07:42:04 GMThttp://www.fixya.com/support/t1752201-hoover_electra_540_dual_spin_r_nHoover Electra 540 Dual Spin. Are hoses still available for this model? I require the hose from the filler to the drum and also from the drum to the pump.Thu, 07 Jan 2010 07:42:04 GMThttp://www.fixya.com/support/t1653344-cleaning_washing_machine_filterAfter a wash cycle, the clothes in my Hoover washing machine (HNL 6126) have a grey gooey substance on them. I think the filter needs to be cleaned, but I don't know where it is, or how to take it out! Can you help me please? CathyThu, 07 Jan 2010 07:42:04 GMThttp://www.fixya.com/support/t1572968-drum_not_turningNOT SPINNING Same problem with old Hoover front loader (electra dual spin 1000F), too old for database but in good condition. Slight electrical burn smell last load, didn't spin out properly, now drum not turning at all though switching mech' seems...Thu, 07 Jan 2010 07:42:04 GMThttp://www.fixya.com/support/t1407181-cancel_pragram_after_wash_startedhoover aaa160 f/loaderThu, 07 Jan 2010 07:42:04 GMThttp://www.fixya.com/support/t1490975-bearings_hotpointMy washing machine suddenly very noisy on spin and also have spots of oil on white washin, reading your problems am guessing bearings have gone on drum - is it worth trying to repair or shall i get new machine I have a hoover washing machine which...Thu, 07 Jan 2010 07:42:04 GMThttp://www.fixya.com/support/t1202403-hoover_washing_m_c_door_jammedWashing cycle finished. Door wont openThu, 07 Jan 2010 07:42:04 GMThttp://www.fixya.com/support/t124003-door_hingeMy door hinge has snapped, and I need to replace it. Just wondering how to get the old one off? There are two screws on the front, with 'star' screwholes. I have removed these, but the hinge still seems screwed in. Are there any other screws (eg...Thu, 07 Jan 2010 07:42:04 GMThttp://www.fixya.com/support/t1283025-instructions_hoover_washer_time_160eIs this manual available?Thu, 07 Jan 2010 07:42:04 GMThttp://www.fixya.com/support/t161731-hoover_aaa_160_error_3Having read all the solutions about clearing the filter and ensuring that the pipes are clear, I am still getting the error 3. The pipes have been removed and cleaned, both from drum to pump and from pump to waste. On a wash cycle all water is pumped...Thu, 07 Jan 2010 07:42:04 GMThttp://www.fixya.com/support/t421486-am_110_washing_machine_light_not_comingI was in mid cycle when the light went off. My clothes were have washed. Left the machine for a couple of hours then tried to select another programme. The power light does not come on and my machine is not responding to anything at all.Thu, 07 Jan 2010 07:42:04 GMThttp://www.fixya.com/support/t381839-hoover_aaa160_stuck_displayingHI I RECENTLY REPLACED THE WATER PUMP AND WHEN I CONNECTED IT BACK, THE SCREEN DISPLAYED WELCOME... THEN IT WAS STUCK ON "CONTINUING PROGRAMME" AND DOESNT ALLOW ME TO DO NOTHING.Thu, 07 Jan 2010 07:42:04 GMThttp://www.fixya.com/support/t139432-wont_drain_error_3the drum wont drain and shows error 3 I have no manualThu, 07 Jan 2010 07:42:04 GMThttp://www.fixya.com/support/t1308698-machine_stops_delay_start_yet_cyclewhen the above "fault" happens the machine is till fill of soapy water. it looks as if the programe requires re-setting can I do this?Thu, 07 Jan 2010 07:42:04 GMThttp://www.fixya.com/support/t1307392-hoover_aaa_160_washer_error_code_4Hoover washing machine intermittenly floods the kitchen & shows error code 4 . If I stand for the 2+ hours the machine works fine, & for the next 2 washes then after it lulls me into a sense of security it spews water all over the floor. I have...Thu, 07 Jan 2010 07:42:04 GMThttp://www.fixya.com/support/t194539-kenmore_elite_he3_front_loading_washerI have had alot of trouble with this washing machine. I have had it for a 1&1/2 years. First the rubber around the door went out and now on of one of the plastic things connected to the steel drums broke off. It is suppose to be such a great washer...Thu, 07 Jan 2010 07:42:04 GMT