Back to: All Products > Hoover > U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
Troubleshooting Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum, Support & Service
Solved Problems
brush roll wont turn
replaced flat belt and v belt but roller wont spin,I was told the cable for the self propel might be broken but I...
1 Solution
replaced flat belt and v belt but roller wont spin,I was told the cable for the self propel might be broken but I...
power switch will not work
seems there is a short in the power switch, is that possible, I have it disassembled and seems there is power going into...
1 Solution
seems there is a short in the power switch, is that possible, I have it disassembled and seems there is power going into...
U6439-900 Self Propell on/off switch
Machine will not self propell.Switch will not engage
1 Solution
Machine will not self propell.Switch will not engage
BELT TO THE BRUSH SEEMS TOO LOOSE EVEN WHEN REPLACED
LOOSE BELT. THE BELT IS STILL LOOSE EVEN AFTER REPLACING
1 Solution
LOOSE BELT. THE BELT IS STILL LOOSE EVEN AFTER REPLACING
Brush won't spin when position of handle changes
When we release the handle and let it fall all the way back, the vacuum brush rotates as normal. When we lift the handle...
2 Solutions
When we release the handle and let it fall all the way back, the vacuum brush rotates as normal. When we lift the handle...
U6439-900 will not turn off by the level in the handle.
I have removed the ahndle and the switch seem to work fine. Re-installed the handle and it wirked for a couple of time,...
1 Solution
I have removed the ahndle and the switch seem to work fine. Re-installed the handle and it wirked for a couple of time,...
Self-Propelled WindTunnel by Hoover U6445906
Sometimes grabs the carpet for no reason. Comes back too fast when I push it back.
1 Solution
Sometimes grabs the carpet for no reason. Comes back too fast when I push it back.
My Model is a U5465-900 - I need to replace the agitator housing.
I don't seem to be able to find a site with entire replacement parts list. Or a cross reference to the U5465-900 model....
1 Solution
I don't seem to be able to find a site with entire replacement parts list. Or a cross reference to the U5465-900 model....
replacement globes
I have been waiting for six months to get a replacement globe for my hoover windtunnel from the place of purchase. They...
1 Solution
I have been waiting for six months to get a replacement globe for my hoover windtunnel from the place of purchase. They...
Problem getting belt around motor shaft... Eureka The BOSS
I have removed cover and can put belt over brush roller just can not find clearance to put belt over motor shaft???
1 Solution
I have removed cover and can put belt over brush roller just can not find clearance to put belt over motor shaft???
Cover knobs
How do you remove the two plastic knobs on the cover for bare or carpet and carpet heighth to get the cover off?
1 Solution
How do you remove the two plastic knobs on the cover for bare or carpet and carpet heighth to get the cover off?
when sucking up dirt I can feel it hitting my feet
I have a Hoover Mach 3 only 2months old. When I sweep up the dirt I can see it going into the container, but I also feel...
1 Solution
I have a Hoover Mach 3 only 2months old. When I sweep up the dirt I can see it going into the container, but I also feel...
accessing self-propelled cable
The self-propelled does not work. How do I find a diagram of how to access and replace. I need to know if I just need...
1 Solution
The self-propelled does not work. How do I find a diagram of how to access and replace. I need to know if I just need...
Sponsored Links
Guru
Repair Service
About | News
| Contact
| Find Products
| Find Cars
| Terms
| Privacy Policy
| FAQ
Tags | Blog | Repair Service Directory | Extended Warranty | Partners | Careers |
Tags | Blog | Repair Service Directory | Extended Warranty | Partners | Careers |