FixYa.com
Technical Support, Instructions & Repair Service

Online User Manual and Guide for Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

Hoover U6437-900 / U6439-900 Windtunnel Bagged > User Guide
Showing Page 4 out of 32 Previous     1 2 3 [4] 5 6 7 8 9     Next
Search keywords inside this manual:

Showing Page 4 out of 32 Previous     1 2 3 [4] 5 6 7 8 9     Next

Sponsored Links

FixYa does not evaluate or guarantee the accuracy of any information provided through its proposed solutions, posts, or Expert Assistance Sessions. By entering this site you declare you read and agreed to its Terms. You may NOT copy or distribute the content that appears on this site without written permission from FixYa Inc.
© 2005-2008, FixYa, Inc. or its affiliates
Open tool cover. The powered hand tool is shipped in a plastic bag for protection. Remove tool from storage area and discard bag. Reposition tool and close tool cover. Place smaller diameter end of wand, into bottom of rack.  Snap wand into clip at the top.  Repeat with other wand. STEP II Attach hose 1-5 1-8 1-9 1-6 1-7 Align end of hose with projection (E) over slots (F) in dirt duct on back of handle. Slide hose into (F) and twist hose to lock it into place. Position hose over rack and into hose tube (G). Snap dusting brush (H), crevice tool (I) and furniture nozzle (J) into stor- age area on back of cleaner. NOTE:  Hose must be connected as shown for  all operations. STEP III Position tools H I J E F F G 4 1-10 STEP  I  Attach  handle Looking at the back of the cleaner, make sure switch (A) is in the OFF position. Slide handle into back of cleaner. Push screws into holes on back of handle. Using a Phillips screw driver, tighten screws securely. 1-2 1-3 A 1-4 B C D Remove switch lock (B) above ON- OFF switch (C) on front of handle by pulling it straight out.  Dispose of lock. If switch lock has come off during assembly, make sure switch is in OFF position (down) before plug- ging cord into electrical outlet. Remove label (D) from self-propel button.