Hotpoint 23 in. BFI62 Built-in Dishwasher - Answered Questions & Fixed issues


This Best And LovlyFull Registration Software For Free Download now & Latest Full Crack Verion! QaisSaeed Com

Hotpoint 23 in.... | Answered on Jul 09, 2018 | 70 views


check rinse pump

Hotpoint 23 in.... | Answered on Apr 07, 2018 | 51 views


There could be air in the water supply line.

Hotpoint 23 in.... | Answered on May 13, 2017 | 43 views


Lights 1 and 3 indicate that the filters are blocked.
Check water flows through the spray arms onto the cutlery - indicated by wet cutlery.
If dry - recirculation pump is probably blocked

Hotpoint 23 in.... | Answered on Jun 24, 2014 | 106 views


The sound of water flowing might be coming from the hard water regeneration unit which will operate sometimes after the wash cycle is complete to clean and regenarate the system. Make sure the salt levels in the container are adequate.

Hotpoint 23 in.... | Answered on Feb 16, 2014 | 55 views


utsav guptas

Hotpoint 23 in.... | Answered on May 14, 2013 | 418 views


If you live in a region with hard water, dishwasher detergents don't work very well anymore. The govt outlawed phosphate as an ingredient in detergent. Weird but true. Look at this map to see if you have hard water. If so, try cloudydishes.com
http://www.citriclean.net/why-citriclean/

Hotpoint 23 in.... | Answered on Mar 19, 2013 | 59 views


This is caused by having a dryer element, if you are able to get to the back of the element look for where the wires connect to it, I am almost positive the element is bad, always turn off the power when looking at any electrical unit to service , if not sure use a tester, you should have zero volts at the connection box near lower right hand side near floor. you can get this element from here if you have all the information on this unit, http://www.appliancepartspros.com/ you can also email me at glipsky@tampabay.rr.com good luck

Hotpoint 23 in.... | Answered on Jul 26, 2011 | 110 views


Hi,



I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms online and installed them in minutes...now the thing works like new... However I have also found that if the heating element goes bad then that also can mess things up bad... So I would buy new spray arms, and also check out the heating element to make sure it is working... Here is a tip that will help you with the online buying...


Dishwasher
Spray Arms not Spinning

How to Buy
Appliance Parts Online

A bad heating element causes many problems in dishwashers...

Dishwasher Problems The
Heating Element not Working

Dishwasher Maintenance



Dishwasher Residue and Film on Dishes



heatman101

Asker's Testimonial "explanation very clear. will give it a go and see how simple it was. thanks Ronnie " - ronnieshomes

Hotpoint 23 in.... | Answered on Mar 03, 2011 | 55 views


Tightening the fittings
1 Remove the service panel that runs along the front of the dishwasher just below the door. If it is screwed in place, remove the screws with a screwdriver. If the panel hangs on hooks, pull the panel out and swing it up to remove it from the hooks.
2 Check the end of the drain hose that connects to the dishwasher. If it's leaking, tighten the clamp with a screwdriver.
3 Check the drain hose connection to the kitchen sink drain. Again, if it's leaking, tighten the clamp with a screwdriver.
4 Check for leaks around the water-inlet valve. If necessary, use an adjustable wrench to tighten the compression fitting that connects the water-supply line to the valve. If the fill hose is leaking, replace the spring clamp that is on the hose with a worm-drive hose clamp. It produces more clamping pressure. Use adjustable pliers to compress the spring clamp so you can pull the clamp and hose off the valve. Remove the spring clamp from the hose. Buy a worm-drive clamp at your hardware store, then install it and tighten it with a screwdriver.

Leveling the machine
1 Remove the front access panel (see step 1, "Tightening the fittings"). This will give you access to the dishwasher's adjustable feet.
2 Open the door completely and remove the bottom dish rack.
3 Unscrew the dishwasher from the kitchen countertop so the dishwasher can move freely as you adjust the feet.
4 Check to see if the dishwasher is level side to side. Place a small level inside the dishwasher so it's sitting on the bottom pan and facing parallel to the front lip of the dishwasher. If the dishwasher is not level, use adjustable pliers to turn one of the dishwasher's front feet up or down until you hit level.
5 Check to see if the dishwasher is level front to back. Turn the level perpendicular to the door, and place it on one of the bottom ledges that run along the side of the cabinet. Check the level again. If the dishwasher isn't level, use your adjustable pliers to turn the back feet up or down until you hit level.
6 Reattach the dishwasher to the countertop and reinstall the front access panel.

Fixing a leaking door
1 Inspect the door gasket. As it ages, the gasket can crack or become hard, preventing it from sealing completely.
2 If the gasket appears solid, adjust the door latch so the door seals tightly. Loosen the screw that holds the door latch to the cabinet. Push the latch in slightly and retighten the screw. Test the door and readjust the latch if necessary.
3 Replace the gasket if water continues to leak after you've tightened the latch. Most gaskets are held by compression in a groove on the door or on the dishwasher cabinet.
4 Pull the old gasket out of its groove, using adjustable pliers (see illustration). Take the gasket to an appliance store to get a replacement.
5 Soak the new gasket in warm water to soften it, then press it into the groove. Start at the top, then work your way down the sides and across the bottom.

Hotpoint 23 in.... | Answered on Nov 24, 2010 | 594 views


I am assuming you have tried the possibility it is the water inlet circuit which could be faulty.

Check page 13 of the user manual.

If it is 2nd and 4th light (daily and soak) then people have found the problem is heater related. Try the Soak cycle to see if any difference. This cycle does not use heater.

Do you have hard water in your area. If there is scaling on the heater then pour normal water with white vinegar 2-3 table spoons in the dishwasher bottom to cover the heater overnight. Run soak cycle to empty dishwasher.

Not sure if any of this helps. Post a comment to confirm.

Hotpoint 23 in.... | Answered on Nov 20, 2010 | 123 views


Hi,
Here is a tip that I wrote about dishwashers and them leaking.

Leaking Dishwasher

heatman101

Hotpoint 23 in.... | Answered on Oct 01, 2010 | 112 views


For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question)(*^%

Hotpoint 23 in.... | Answered on Oct 01, 2010 | 137 views


The problem is hard water. www.dishwasherfilter.com has a product to solve this problem once and for all. It filters the water going into your dishwasher and removes the hard minerals that leave those spots. It is very affordable and even has a money back guarantee. You will love the way your dishes look with this product.

Hotpoint 23 in.... | Answered on Sep 30, 2010 | 345 views



Hi,

Here is a tip that I wrote that will help you with your dishwasher not draining problem...

Dishwasher Problems - Water will not drain out

heatman101

Hotpoint 23 in.... | Answered on Sep 07, 2010 | 70 views


Hi,
Here is a tip that I wrote that will help you with your dishwasher not draining problem...

Dishwasher Problems - Water will not drain out
http://www.fixya.com/support/r4078724-dishwasher_problems_water_will_not_drain

heatman101

Hotpoint 23 in.... | Answered on Aug 17, 2010 | 104 views


Hi,
Checkout this tip that I wrote about why the detergent cup may not be working

Dishwasher Repair Problem Detergent Cup does not Open
http://www.fixya.com/support/r4225828-dishwasher_repair_problem_detergent_cup

heatman101

Hotpoint 23 in.... | Answered on Aug 14, 2010 | 112 views


Thanks for your question!
I'm sorry that you haven't received an answer yet.
The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:
1. the question is unclear, incomplete, or poorly worded...
2. the question is mis-categorized - so the correct experts aren't viewing it...
3. the question requires an answer for something that cannot be explained online adequately...
4. specific training, tools, or equipment are required to avoid injury or death...
5. the Experts that are online simply don't have the resources to answer your question fully...
Please feel free to re-work your question if you feel one of these may be the reason.
Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.
Normal rates for FixYa are...
$ 9.99 answer for one question.
$12.99 Live Real-Time online chat or premium e-mail support.
$29.99 Live Real Time phone support
Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.

Consider the savings that can be had when an informed Expert can save you a $100 service call, or a $350 trip to the car dealership.
Your problem solved - guaranteed! Or your money back!!
If you don't want to pay - feel free to re-submit your question so it returns back to the top of the work queue if you still need help.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question

Hotpoint 23 in.... | Answered on Aug 13, 2010 | 326 views


what you talking about willis, what salt?

Hotpoint 23 in.... | Answered on Jul 28, 2010 | 114 views

Not finding what you are looking for?
Hotpoint 23 in. BFI62 Built-in Dishwasher Logo

151 questions posted

Ask a Question

Usually answered in minutes!

Top Hotpoint Dishwashers Experts

Archie Ferrarini
Archie Ferrarini

Level 3 Expert

869 Answers

Marvin
Marvin

Level 3 Expert

85108 Answers

Brad Brown

Level 3 Expert

18067 Answers

Are you a Hotpoint Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...