Hotpoint 18 in. DC27 Slim-Line Built-in Dishwasher

Problems & Solutions

• water will not go into machine even though supply

  sounds like the supply pump is not working

  • bob4thejob
  • 8/22/2009 4:29:03 PM
  • 167 Views

  1 Solution

• dishwasher pump will drain but not force water into spray...

  If the washer is not used regularly the shaft can stick to the seals and prevent the motor from spi...

  • bobschwind
  • 12/11/2007 4:26:40 PM
  • 1296 Views

  2 Solutions

• water does not stop when full.

  Sounds like either your float is either hung up,the float switch is bad,or your water valve is lea...

  • roger_rob204
  • 1/28/2011 9:50:44 AM
  • 36 Views

  1 Solution

• The water will not drain full from the machine.

  Hi, Here is a tip that I wrote that will help you with your dishwasher not draining problem... Dis...

  • jwoods1101
  • 6/5/2010 7:38:07 AM
  • 161 Views

  1 Solution

• takes hours

  Check your inlet water flow time.

  • karenboughey
  • 4/1/2010 11:10:34 AM
  • 28 Views

  1 Solution

• when switched on is stuck permamently on the rinse

  The automatic timer is either broken or malfunctioning. You will need to order a new timer box which can...

  • jtrayford
  • 12/4/2009 4:25:11 PM
  • 97 Views

  1 Solution

• the d'washer just stops after about 2,3 mins with light...

  drain problem

  • michaeljjant
  • 9/13/2009 5:35:38 PM
  • 181 Views

  1 Solution

• dishwasher stopped and 'wash' light flashing

  Try disconnecting the power for an hour or more then try again.

  • sandero
  • 7/1/2008 10:01:18 AM
  • 135 Views

  1 Solution

• Mcclary dishwasher

  puit a new timer in it

  • steve300882
  • 4/7/2008 11:12:12 PM
  • 92 Views

  1 Solution

• After pumping out all the water, the machine just keeps on...

  my dishwasher has 2 green lights flashing will not complete cycle

  • bobhiggins
  • 9/19/2012 8:09:40 AM
  • 262 Views

  2 Solutions

• why is my dishwasher making my glassware dull ? and knives...

  They all do given time.  The water is rushing out at a high speed and hiting the glass which min...

  • Martin Stobbart
  • 5/1/2012 2:34:04 PM
  • 80 Views

  1 Solution

• How do I resolve A01 fault on hotpoint dishwasher

  A01 is an overflow or water in the base. What you need to do for this is pull the machine out and...

  • Wolfmanlucy
  • 3/12/2012 11:01:17 PM
  • 167 Views

  1 Solution

• A-1 code on Hotpoint FDF 780P - can I fix this?

  A01 is an overflow or water in the base.What you need to do for this is pull the machine out and tip...

  • mike hardy
  • 3/12/2012 5:13:34 PM
  • 171 Views

  1 Solution

• salt light stays on all the time -salt is full

  The sensor that detects the salt level is faulty, it shouldn't affect the actual operation of the...

  • sanders384
  • 3/10/2012 4:23:05 PM
  • 402 Views

  1 Solution

• A11 code for a hotpoint FDD912 dishwasher please what does...

  Half load triac or wash motor action error detected. Check divertor valve; Check wash pum...

  • j_pab
  • 2/13/2012 9:18:31 AM
  • 430 Views

  1 Solution