my heater will fire up and run then if i unplug it and plug it back in the motor spins slow and the...
(More)
my heater will fire up and run then if i unplug it and plug it back in the motor spins slow and the reset pops,if i let it sit for a couple miutes it fires up,the motor spins freelyand is not hot,help
55000 btu kerosene heater I ran great until i moved the heater to another room, plugged it back in...
(More)
55000 btu kerosene heater I ran great until i moved the heater to another room, plugged it back in an it ran for maybe 45 seconds then cuts off. Now when i plug it in, it does nothing. Can someone please help me?
I have a 55,000 btu heater it wont fire off. sounds like it wants too then just dies. kerosene...
(More)
I have a 55,000 btu heater it wont fire off. sounds like it wants too then just dies. kerosene heater
when i pug it in it comes on for a couple seconds and then shuts off. what part do i need to fix...
(More)
when i pug it in it comes on for a couple seconds and then shuts off. what part do i need to fix .... thanks alot Trey
I have a Reddy Heater Model:RN30. Do I need to replace the ODS/Pilot (Part#098244-01) or the...
(More)
I have a Reddy Heater Model:RN30. Do I need to replace the ODS/Pilot (Part#098244-01) or the component that broke-off ( flange attachment that fits the gas housing ) ?
30 - 55 propane BTU Ready Heater will fire up but will not remain running after you release the...
(More)
30 - 55 propane BTU Ready Heater will fire up but will not remain running after you release the starter
When I push the reset button the reddy heater 50,000 btu starts up runs for approx. 15 to 20...
(More)
When I push the reset button the reddy heater 50,000 btu starts up runs for approx. 15 to 20 seconds,reset button pops out and stops running. Spark plug sparks until reset button pops out,optic eye has been cleaned,fuel filter has been cleaned, next time it is started it runs for a shorter time and reset button pops out again. Can kerosene get old?
it is a 35000 btu when it is running the flamme spits and sudduers. i ajust the two scews on the...
(More)
it is a 35000 btu when it is running the flamme spits and sudduers. i ajust the two scews on the back side just dont know the wringht setting
starts, lights, burning inconsistently but stays running. smokes alot. Just changed nozzle, air...
(More)
starts, lights, burning inconsistently but stays running. smokes alot. Just changed nozzle, air filter and regulator, and spark plug. It's not running like it used to and should. Any suggestions? Thank you.
I have a 55000 btu kero heater. its like new. I used it 3 -4 times last year. I pulled it out this...
(More)
I have a 55000 btu kero heater. its like new. I used it 3 -4 times last year. I pulled it out this year and it wont fire. The switch lights up but when you push it down. nothing happens. a couple times the fan would start then stop. last nite I couldnt get it to work, but left it plugged in..it started 45 min later and burned up the welder that was in front of it. I think you have a safety issue here. are there any other instances of switch malfunctions, or is the ignition faulty. the switch always lights up but doesnt seem to energize anything. I sell these things in my business but am afraid to after this issue.