http://www.fixya.com/support/p402724-brother_se_270d_computerized_sewingSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comSat, 26 Jul 2008 09:46:41 GMT80http://www.fixya.com/support/t320912-lower_presser_foot_error_se_270dMy Brother SE 270D will not allow me to sew or embroider. I keep receiving the "Lower presser foot" message even after the foot is in the "down" position. I have tried unplugging the machine and the same message comes up each time.Sat, 26 Jul 2008 09:46:41 GMThttp://www.fixya.com/support/t558514-bobbin_timing_instructionCould you please send me the timing instructions for a Brother SE-270D? E-Mail to kazager@yahoo.com. Thank you!Sat, 26 Jul 2008 09:46:41 GMThttp://www.fixya.com/support/t219165-brother_se_270d_jams_below_needle_plateI bought and returned two of these machines that were refurbished. The sewing machine works fine if you are just doing straight, zig-zag, or any other type of stich. You can put the same piece of material with stabilizer in a hoop, install the...Sat, 26 Jul 2008 09:46:41 GMThttp://www.fixya.com/support/t597474-ve_broken_somethingI accidentally had the needle in the down position when I pushed the thread cartrige down. When this happened some sort of piece slipped out of place and came off. I'm not sure how to put it back. Can you HELP? I'm pretty sure it was the part that...Sat, 26 Jul 2008 09:46:41 GMThttp://www.fixya.com/support/t525362-parts_fell_outA part that fell out of my machine, looks like a presser foot. where does it go. I know it came from the automatic threader.Sat, 26 Jul 2008 09:46:41 GMThttp://www.fixya.com/support/t658876-trying_put_items_card_continue_sewingOn PED-Basic i cannot find MY DOCUMENTS on it so how can i put my items on it? All I can see is card or desktopSat, 26 Jul 2008 09:46:41 GMThttp://www.fixya.com/support/t457719-brother_ped_basic_driverI have a Brother SE-350 and I just received the PED-Basoc I ordered online. I thought I followed the installation correctly, but I do not see any images or designs on the card. I unistalled the software and reinstalled, is it possible I deleted the...Sat, 26 Jul 2008 09:46:41 GMThttp://www.fixya.com/support/t504634-white_w100_mighty_mender_sewing_machineCan you please tell me where to find a instruction manual to buy.?Sat, 26 Jul 2008 09:46:41 GMThttp://www.fixya.com/support/t323128-non_system_disk_or_disk_errorwhen i turn on computer it comes up with a black screen with non-system disk or disk error replace and strike any keySat, 26 Jul 2008 09:46:41 GMThttp://www.fixya.com/support/t444870-spaceing_between_two_wordsHow does one put a space between two wordsSat, 26 Jul 2008 09:46:41 GMThttp://www.fixya.com/support/t540631-knowHELLO, WOULD YOU KNOW THE MAX CAPACITY & THE LIGHT SPEED OF THE CARDS USED FOR A BROTHER SE270D EMBROIDERY MACHINE?THANK YOUSat, 26 Jul 2008 09:46:41 GMThttp://www.fixya.com/support/t615067-threading_needle_embroidery_machineHi there, I've just bough a second had Brother embroidery machine. I am now having a problem threading the needle with the automatic needle threader. i follow the guidelines to thread the cotton but when the mechanism comes through to thread the...Sat, 26 Jul 2008 09:46:41 GMThttp://www.fixya.com/support/t605821-embroidery_armi have been embroiderin all was fine. i turn the machine off for the nite. turn on this am, and the message embroidery carriage will move, keeps poppin up. when i push okay button, jus goes back to same message. the embroidery arm s not movin like it...Sat, 26 Jul 2008 09:46:41 GMThttp://www.fixya.com/support/t490289-safety_device_activatedOkay, fair enough. The needle does not appear to be bent. Neither the upper or lower threads are jammed. And not the machine will not sew. Horrible grinding noise and the balance wheel is locked and won't budge an inch. I bought this machine for my...Sat, 26 Jul 2008 09:46:41 GMThttp://www.fixya.com/support/t590147-brother_se_270d_sew_embroidery_makesbrother SE 270 D sewing & Embroidery machineSat, 26 Jul 2008 09:46:41 GMThttp://www.fixya.com/support/t584640-think_machine_brokeMy automatic threader doesn't work. The piece that actually catches the thread actually popped off and won't stay on. Second, when emroidering, it starts to embroider fine for the first few stitches, then al of a sudden it starts to sound really bad...Sat, 26 Jul 2008 09:46:41 GMThttp://www.fixya.com/support/t568332-transfering_design_pattern_from_onlineI have an HP with windows XP with a new PED Basic. It was doing fine for awhile but now it will not transfer patterns from online to the program. Win 32 and pes is not acceptable are most of the notes. Have tried to cut & paste, transfer . It does...Sat, 26 Jul 2008 09:46:41 GMThttp://www.fixya.com/support/t582722-se_270d_skipping_stitchesI have same thread (#50) cotton upper & lower. Using 90/14 on 100% cotton. Mostly skips stitches on zigzag stitches. Any ideas?Sat, 26 Jul 2008 09:46:41 GMThttp://www.fixya.com/support/t582729-skipping_stitchesUsing (#50) upper & lower, 90/14 sharp on 100% cotton fabric. Mostly skips stitches when making zigzag. I cleaned underneath thoroughly. I even removed the needle plate. Could I have thrown thread clearance out? I'm stumped!Sat, 26 Jul 2008 09:46:41 GMThttp://www.fixya.com/support/t525318-thethread_keepsnappingthethread keepsnappingSat, 26 Jul 2008 09:46:41 GMThttp://www.fixya.com/support/t426294-thread_adjustmentstitching is even. how to adjust the thread tension and bobbin thread.Sat, 26 Jul 2008 09:46:41 GMThttp://www.fixya.com/support/t558699-brother_2003d_jammedWas embroidering and the machine jammed. ?Said safety device was engaged. ?No jammed thread or bent needle. ?Did take apart the bobbin area and blow out lint. ?Was able to start again, only for it to happen again. ?any ideasSat, 26 Jul 2008 09:46:41 GMThttp://www.fixya.com/support/t514967-singer_sewing_machine_model_3140_merrittI CAN'T GET THE MACHINE TO OPERATE THE THREAD KEEPS BREAKING OR THE BOBIN THREAD NOT ATTACHING AND SEWINGSat, 26 Jul 2008 09:46:41 GMThttp://www.fixya.com/support/t554043-brother_sewing_machine_embroderyse_270dHi my brother se-270d won't pick up the bobbin thread I have been told that it could be that the timing is off. How do I fix that problem? I sure would love to start sewing and embroding again thanks Sue e-mail fana42@aol.comSat, 26 Jul 2008 09:46:41 GMThttp://www.fixya.com/support/t489484-threading_auto_cartridgethe needle won't thread when i load the cartridgeSat, 26 Jul 2008 09:46:41 GMThttp://www.fixya.com/support/t358563-brother_se_270d_need_timing_instructionsI have had the thread bunch up twice in my machine. Once I took to dealer...he is over 75 miles away (round trip). Even though it's under warranty, it's hard for me to get into the city. Is there anyplace I can download the instructions on timing...Sat, 26 Jul 2008 09:46:41 GMThttp://www.fixya.com/support/t294702-brother_embroidery_cards_reads_nothingHi, I have a brother disney embroidery/sewing machine which I just got and when I put the extra font card in the machine and turn it on the screen is blank. Why? Thank you-AnaSat, 26 Jul 2008 09:46:41 GMThttp://www.fixya.com/support/t401003-top_threadHi, I am new with this machine. I was trying to use the embroidery. I was having a bit of trouble in the beginning. At first, the shirt (along with the Light weight Stabilizer) had gotten pulled and caught (it bore a small hole on the shirt). I was...Sat, 26 Jul 2008 09:46:41 GMThttp://www.fixya.com/support/t436213-thank_supporti am ethiopian garment indestries conseltant but i have some problems that is too give treaing i have to have some manuals so please help me gasab_14@yahoo.comSat, 26 Jul 2008 09:46:41 GMThttp://www.fixya.com/support/t447119-changing_needle_threadWhen using the walking foot and I need to change the thread, unless I take the walking foot off, the needle hits the foot and breaks. It only does this with the walking foot. Is this normal? thanksSat, 26 Jul 2008 09:46:41 GMT