http://www.fixya.com/support/p398962-gateway_19lcd_19_in_flat_panel_lcdSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comWed, 20 Aug 2008 23:08:43 GMT80http://www.fixya.com/support/t670953-17_gateway_notebook_oiwer_sourceI have a Gateway notebook that is just over a year old. The computer went off and will not come back on. I contacted Gateway and they told me to remove the battery and harddrive, replace harddrive then wait 30 min replace battery and it should come...Wed, 20 Aug 2008 23:08:43 GMThttp://www.fixya.com/support/t250985-power_not_being_received_monitorMy 19 inch Gateway flat screen is not receiving power. I tried 3 different power cords and connected it to 4 different power outlets ,all working fine.Does anyone have a solution for this? Thanks.Gabe.Wed, 20 Aug 2008 23:08:43 GMThttp://www.fixya.com/support/t256675-computer_screenmy computer screen has jumped sideways, how do i return it to its upright position please?Wed, 20 Aug 2008 23:08:43 GMThttp://www.fixya.com/support/t259111-al_1916_monitor_green_light_flashesMonitor worked fine then I shut the computer down for a few days. Now when I turn the computer back on the green light on the monitor flashes dimly and the screen flashes white. I am unable to see anything on the screen. Any suggestions as to what...Wed, 20 Aug 2008 23:08:43 GMThttp://www.fixya.com/support/t259511-get_full_screenI have a TOSHIBA Model # PV 2001U and can't get a full screen. HelpWed, 20 Aug 2008 23:08:43 GMThttp://www.fixya.com/support/t267819-audio_driver_compaq_v2000_series_vistai installed vista but most of driver is missing.please give me any type of driver which is helpful for my laptop send me please immediately cvccxvcxvWed, 20 Aug 2008 23:08:43 GMThttp://www.fixya.com/support/t226023-horizontal_linehorizontal line across the middle of the screenWed, 20 Aug 2008 23:08:43 GMThttp://www.fixya.com/support/t226119-flyback_testerHellow sir. Can you help me find a diagram for "FLYBACK TESTER" i just want to construct and practice this type of test instruments..... pls sir help me with this one...Thanks a lot...Wed, 20 Aug 2008 23:08:43 GMThttp://www.fixya.com/support/t226767-use_dvi_monitorIs there a setting that needs to be changed in the hardware or software for the monitor to use DVI. The analog VGA works fine. The video card is a NVidia GeForce FX5500 going to a NEC Multisync LCD 1935NXM. Thanks.Wed, 20 Aug 2008 23:08:43 GMThttp://www.fixya.com/support/t233635-boka_monitor_problemhave a horizontal white line on the screencan you show me the picture of the damage verticalWed, 20 Aug 2008 23:08:43 GMThttp://www.fixya.com/support/t235359-xerox_17_xl765_lcd_monitor_wavy_linesMy Xerox XL765 17 LCD monitor is displaying wavy lines in the picture, like some kind of vsynch/hsynch problem.I have replaced the Ac adapter and changed outlet sockets here at home and at work.the picture is visible IE I can see the start button and...Wed, 20 Aug 2008 23:08:43 GMThttp://www.fixya.com/support/t241551-problem_monitori have had this computer for about 6 months one red dot appeared on the monitor and now a blue ones there aswell i contacted acer about it but they said as long as its not right in the middle of my screen i need not worry is that trueWed, 20 Aug 2008 23:08:43 GMThttp://www.fixya.com/support/t202243-proview_pl716s_computer_monitorI have a Proview PL716s monitor and it now powers up and displays a proper image for about a second and then goes to blank. The power LED remains a solid green. I have confirmed that the computer is putting a steady signal out. Any thoughts?Wed, 20 Aug 2008 23:08:43 GMThttp://www.fixya.com/support/t202271-benq_lcd_17_inch_monitorThe monitor powers on but no logo just ablack screen. When I shut off computer the signal turns the green poer light to amber. But I dont know what could cause my screen to not show anything. Make : BenQ Model: Q7T3 Product number FP73IWed, 20 Aug 2008 23:08:43 GMThttp://www.fixya.com/support/t206303-some_letters_monitor_fading_outI have a larger Dell monitor and an Nvidia5200 video card. Some letters show up as not filled in completely.Wed, 20 Aug 2008 23:08:43 GMThttp://www.fixya.com/support/t204411-monitori want 19" monitor but my address is india what your supportWed, 20 Aug 2008 23:08:43 GMThttp://www.fixya.com/support/t212479-resolution_problemsCannot get resolution to 1440x900.Wed, 20 Aug 2008 23:08:43 GMThttp://www.fixya.com/support/t216255-princeton_17_lcd_monitorMonitor won't stay on. When I turn the unit on it the picture will flash on for aboue 20 seconds then goes off. Repeatedly turning the unit off and on gets the same response. BUT sometimes it works just find. Have replaced the video card - no...Wed, 20 Aug 2008 23:08:43 GMThttp://www.fixya.com/support/t224899-problems_samsung_2026bw_monitorPressing the 'Auto' button bottom rhs of screen puts message on screen: "Auto adjustment not available" Have just bought it and all else seems to be OK. Is this a fault? many tks ian ianclewes@lineone.net.ukWed, 20 Aug 2008 23:08:43 GMThttp://www.fixya.com/support/t282863-monitor_monkeying_aroundIT STARTS TO SHOW GOOD THEN, IT GOES CONCAVE PICTURE. THEN SOMETIMES, IN THE CENTER OF THE SCREEN,MONITOR ON FULL PICTURE AND SUDDENLY YOU SEE A 3 INCH RED AND BLUE SQUARE SITTING PERFECTLY IN THE CENTER OF THE SCREEN,ALONG WITH THE PICTURE, STILL...Wed, 20 Aug 2008 23:08:43 GMThttp://www.fixya.com/support/t282919-samsung_monitor_problemi have samsung 56v monitor. the monitor does not turn on when i press power switch . But when I repeatedly press power switch ,at some instance it turns on.Wed, 20 Aug 2008 23:08:43 GMThttp://www.fixya.com/support/t282923-screensize_lg_monitorSIR, MY MONITOR WAS ONCE NOT STARTING ONCE THEREFORE I REMOVED ITS WIRE FROM CPU AND THAN PLUGGED IT AGAIN. THE MONITOR TURNED ON BUT THE WIDTH DECREASED VERY MUCH THAN I AGAIN DID THE SAME THING AND THAN THE WIDTH SIZE INCREASED AND NOW IT IS NOT...Wed, 20 Aug 2008 23:08:43 GMThttp://www.fixya.com/support/t283363-resolutionHi, I bought new monitor, set resolution in control panel to 1680X1050 as recommended. Clicked "Apply" and "OK". Works OK until I switch off. When rebooted reverts to smaller resolution with huge display and blurred photos. Running Windows XP. What...Wed, 20 Aug 2008 23:08:43 GMThttp://www.fixya.com/support/t271583-screen_flickerScreen flickers badly at the resolution i want to use and no option to alter refresh rate - any ideas?Wed, 20 Aug 2008 23:08:43 GMThttp://www.fixya.com/support/t289107-drivers_lg_crt_710s_monitorIm having trouble finding and installing the above driver. Can you assist please.. Tx RubenWed, 20 Aug 2008 23:08:43 GMThttp://www.fixya.com/support/t282095-screen_menu_displays_locked_unlockedHi i am a small techni,i have got problem in samtron 56v.It displays locked and unlock,if i press exit also it does not exits.it acts as if we r pressing menu boton.but the menu boton is ok.the memory also resets. I can't access the control buttons...Wed, 20 Aug 2008 23:08:43 GMThttp://www.fixya.com/support/t292115-screen_resolutionI am unable to set my screen resolution to 1024 by 768 from the present 800 by 600 pixels. When ever i try to change this screen resolutin to 1024 ny 768, my monitor says it is out of frequency and reverts back to previous resoultion.Wed, 20 Aug 2008 23:08:43 GMThttp://www.fixya.com/support/t295487-no_powerno powerWed, 20 Aug 2008 23:08:43 GMThttp://www.fixya.com/support/t300147-osd_lock_problemin my 17 inch viewsonic monitor its showing everytime osd lock problem...help me outWed, 20 Aug 2008 23:08:43 GMThttp://www.fixya.com/support/t306467-22_inch_wide_screen_x2gen_lcd_monitorHi, I have a 22" wide screen X2Gen LCD monitor. The monitor suddenly wnt blank (black) with nothing to display. The power is on and blinks between green and orange but no display. How do I fix it? It is only 8 months old. Thanks e-mail:...Wed, 20 Aug 2008 23:08:43 GMT