FixYa.com
Technical Support, Instructions & Repair Service
Home | My Products | Sign In

Online User Manual and Guide for JVC GR-D50 Mini DV Digital Camcorder

JVC GR-D50 Mini DV Digital Camcorder > User Guide
Showing Page 7 out of 48 Previous     3 4 5 6 [7] 8 9 10 11     Next
Search keywords inside this manual:

Showing Page 7 out of 48 Previous     3 4 5 6 [7] 8 9 10 11     Next

Sponsored Links

FixYa does not evaluate or guarantee the accuracy of any information provided through its proposed solutions, posts, or Expert Assistance Sessions. By entering this site you declare you read and agreed to its Terms. You may NOT copy or distribute the content that appears on this site without written permission from FixYa Inc.
© 2005-2008, FixYa, Inc. or its affiliates
EN 7 y r @ p Battery pack BN-V408U BN-V416U (optional) BN-V428U (optional) Charging time approx. 1 hr. 30 min. approx. 3 hrs. approx. 5 hrs. Power CHARGING THE BATTERY PACK 1 With the arrow on the battery pack pointing upward, push the battery pack slightly against the battery pack mount @, then slide up the battery pack until it locks in place. 2 Set the Power Switch y to “OFF (CHARGE)”. Connect the AC Adapter to the camcorder, then connect the Power Cord to the AC Adapter. 3 Plug the Power Cord into an AC outlet. The POWER/CHARGE lamp r on the camcorder blinks to indicate charging has started. 4 When the POWER/CHARGE lamp r goes off, charging is finished. Unplug the Power Cord from the AC outlet. Disconnect the AC Adapter from the camcorder. To Detach The Battery Pack: Slide the battery pack down slightly while sliding down BATT. RELEASE p to detach it. USING THE BATTERY PACK Perform step 1 of “CHARGING THE BATTERY PACK”. Battery pack BN-V408U BN-V416U (optional) BN-V428U (optional) BN-V840U (optional) BN-V856U (optional) LCD monitor on 1 hr. 10 min. 2 hrs. 30 min. 4 hrs. 20 min. 5 hrs. 20 min. 8 hrs. 10 min. Viewfinder on 1 hr. 40 min. 3 hrs. 30 min. 6 hrs. 20 min. 7 hrs. 30 min. 11 hrs. 10 min. Charging times are for a fully discharged battery pack. USING AC POWER Connect the AC Adapter to the camcorder as shown in the following illustration. • The provided AC Adapter features automatic voltage selection in the AC range from 110 V to 240 V. GETTING STARTED Battery pack To DC connector To AC outlet AC Adapter ATTENTION Before detaching the power source, make sure that the camcorder’s power is turned off. Failure to do so can result in a camcorder malfunction. INFORMATION The extended-use battery pack kit is a set composed of a battery pack and AC Power Adapter/Charger: VU-V840 KIT  : BN-V840U battery pack & AA-V15 AC Power Adapter/Charger VU-V856 KIT  : BN-V856U battery pack & AA-V80 AC Power Adapter/Charger Read the kit's instruction manual before using. Also, by using the optional JVC VC-VBN856U DC Cord, it will be possible to connect BN-V840U or BN-V856U battery packs to the camcorder and supply power directly to the camcorder. NOTES: If the protective cap is attached to the battery pack, remove it first. During charging, the camcorder cannot be operated. Charging is not possible if the wrong type of battery is used. When charging the battery pack for the first time or after a long storage period, the POWER/CHARGE lamp r may not light. Remove the battery pack from the camcorder, then try charging again. If a fully-charged battery’s operation time remains extremely short, the battery is worn out. Please purchase a new one. Recording time is reduced significantly when Zoom or Record-Standby mode is engaged repeatedly or the LCD monitor is used repeatedly. Before extended use, it is recommended that you prepare enough battery packs to cover 3 times the planned shooting time. Continued on next page. Arrow Approximate recording time