20 Most Recent JVC Cybercam GR-D70 Mini DV Digital Camcorder - Page 2 Questions & Answers


Hi,
Your JVC GR-D70 got ccd imager chip failure problem and ccd imager chip will be replaced to get live view in camera mode to get it record.
JVC offers free of cost ccd imager chip replacement for this model, click JVC CCD Imager Support link for details.
Hope these info will help you.
Thanks.

JVC Cybercam... | Answered on Dec 20, 2010


You're probably having a ccd or tape head issue, and the ribbon connector from it to the main board is probably loose, and needs to be reset. This will require the unit being serviced and possibly disassembled, which isn't for everyone. If you take it into a camera repair shop, get an estimate first, since the cost of repair can often justify buying another camcorder.

JVC Cybercam... | Answered on Dec 17, 2010


it's the bus line was broke somewhere. You have to change the whole bus line!

JVC Cybercam... | Answered on Oct 28, 2010


There is a DEW sensor within the camera as a protection as when there is condensation due to cool condition within the tape can get chewed into the cylinder head drum.
So all what you need to do next time is to keep it in a warm place, use a hair dryer slighly into the door after ejecting tape or you can put the set On overnight without any harm.
When you travel keep the camera covered with a blanket and do not expose the camera to direct AC vent.

JVC Cybercam... | Answered on Oct 28, 2010


This is usually caused by a failed component in the moisture detection circuitry within the camera and can usually be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired qualified service technician.


My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.


If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

JVC Cybercam... | Answered on Sep 26, 2010


I need grd-70 dr?ver.thanks.all.

JVC Cybercam... | Answered on Sep 25, 2010



This is usually caused by a defective CCD image sensor and can be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired qualified service technician.


My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I

JVC Cybercam... | Answered on Sep 18, 2010


This is usually caused by a failed component in the moisture detection circuitry within the camera and can usually be repaired fairly inexpensively. However, it’s not a user serviceable problem and will need to be repaired qualified service technician.

My name is Rick and I’m a professional repair technician with over 20 years in the business and have repaired many of these. I’m semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

JVC Cybercam... | Answered on Sep 14, 2010


probably the ccd imager assembly has failed. The imager in this camera is reasonably priced and easy to replace

JVC Cybercam... | Answered on Jun 26, 2010


Try warm air from a hair dryer over the mechanism with the cassette door open for a couple of minutes. do not over do it. The dew sensor is sending an active signal to the control cct to prevent tape damage in use.

JVC Cybercam... | Answered on Jun 09, 2010


At times the "failed to build a preview graph" error measage appears when the editor has a problem with the capture file format. By STUIO 8 I presume you mean PINNACLE STUDIO 8? Try changing your capture settings, like MPEG to AVI or vice versa.
Otherwise download the latest patch for Studio 8 from www.pinnaclesys.com . It's free if you have registered your copy of the software.
Let's hear from you again. All the best.

JVC Cybercam... | Answered on Apr 18, 2010


the other day i found a thing for a problem like this. someone said to use one of these. not sure. i would try one but my video camera got lost in a fire :( if you try one, post on here if it works please
http://cgi.ebay.com/Easycap-USB-2-0-Video-TV-DVD-VHS-Audio-Capture-Adapter_W0QQitemZ170435042087QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item27aeb85b27

JVC Cybercam... | Answered on Apr 17, 2010


you have to have a fire wire cord to do that if you have a pc its simple bye a 1394 firewire from any store and install it and your ready to go.

JVC Cybercam... | Answered on Apr 11, 2010


This model has feature(almost all JVC models) that will invert the image on LCD Monitor in order for you to shoot video yourself while watching in the monitor or even the subject. But sometimes, frequent closing and opening of the LCD Monitor damaged the flexi wire thus closing and opening of the swithes won't reached the CPU. Erroneous info occur so as the outcome. Visit JVC Service Center near you, parts is hard find if you let somebody else do. Hope it helps

JVC Cybercam... | Answered on Feb 28, 2010


The software that came with your camera should work. Download the miniDV to the computer, then burn a dvd on the computer. If you google it, you'll find some web sites that explain how.

JVC Cybercam... | Answered on Feb 19, 2010


A sensor called the DEW sensor, "Thinks" that there is moisture in the camera, this may or may not be so. I suggest you open the camera up, leave it in a quite a warm place for a bit, and see if that clears it. otherwise it may be a faulty sensor, happens frequently.

JVC Cybercam... | Answered on Feb 09, 2010


Follow these steps.

do not connect the camera or USB

Go to ctrl Panel and open device manager find the network card select properties hardware and reinstall the driver. If it says current driver is ok then proceed.

Next insert the CD for the camera and when it starts select repair.
When fi9nished connect USB and camera
The camera should now be able to communicate


Please rate my help++++Thanks for using FIXYA

JVC Cybercam... | Answered on Feb 03, 2010


Hi Your camera has an defective CCD sensor this is an common problem for a lot of JVC series. But... JVC will repair this for FREE. Call your JVC headquarter in your country and claim the warranty for this problem

JVC Cybercam... | Answered on Jan 28, 2010

Not finding what you are looking for?
JVC Cybercam GR-D70 Mini DV Digital Camcorder Logo

103 questions posted

Ask a Question

Usually answered in minutes!

Top JVC Video Cameras Experts

Steven Wander
Steven Wander

Level 3 Expert

594 Answers

Mohamad Abdan
Mohamad Abdan

Level 2 Expert

71 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a JVC Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

GR JVC

  • GR JVC

Most Popular Question

user manual gr d20ek

  • Video Cameras
Loading...