E-111Hold the cable of the display unit with the connection plug facing up, and insert the plug into thedisplay unit connector of the control unit.2Plug the AC adapter into the AC adapter (DC IN) connector of the control unit and into a power outlet.3Make sure to set the POWER switches of the control unit and connected video component toOFF, then connect the AV cable to the audio/video input jack of the control unit and to the outputjacks of the video component as shown in the figure.* To unplug the displaycable, pull it out bypressing thedisconnect buttons on both sides of theconnection plugsimultaneously.Video componentsuch as a VCR, LDplayer, DVD player,etc.AudioRight(Red)AudioLeft(White)Video(Yellow)To audio/video output jacks (pin jacks)AV cable (provided)To audio/videoinput jackAC adapterPower outletTo AC adapter (DC IN)connectorTo display unitconnector* The connection plugshould face upward.Display cableCONNECTIONS* Be sure to connect tothe audio/videooutput jacks on thevideo component. Noaudio/video can beoutput if the AV cableis connected to theaudio/video inputjacks. Note: If your video component is monaural, you will hear the audio only through one earphone.or
Guru