NEC MultiSync LCD1765 17" Flat Panel LCD Monitor - Page 7 - Answered Questions & Fixed issues

Computer does not boot up The problem maybe the RAM, it is faulty or just needs reseating to make proper electrical contact.
Reseat the RAM and then boot up your laptop. If it still does not boot up then remove the RAM module/s and take them to your friendly computer repair shop and get them to test the RAM for you. Just like you sometimes need a mechanic to repair your car, sometimes you do need a technician to diagnose and identify the fault or faults on your computer. Not only does a good service technican have the experience to deal with this type of problem, they also have the equipment that allows them to look at things the average computer user can't see, and he has a collection of replacement parts that can be used to quickly test individual components on your computer.

NEC Computers &... | Answered on Nov 03, 2012 | 32 views

Try or

NEC Computers &... | Answered on Oct 22, 2012 | 58 views

If you're using Windows 7 and I think Vista, hold down the Ctrl key and roll the mouse wheel up. (Don't move the mouse up, use the wheel)

NEC Computers &... | Answered on Oct 19, 2012 | 24 views

click start control panel,regional and language options select regional language options from the

drop down list select the language you want also from the bottom drop up list you can select your present location location or another language


you might need to download the language pack from microsoft

hope this helps

NEC Computers &... | Answered on Sep 23, 2012 | 160 views

click start control panel administration tools computer management device manager scroll through all of your devices

if you see a yellow question or exclamation mark ? ! or a red X you will need to update the drivers for this device right click select update driver/reinstall driver

if you can see your usb device but its not working scroll to Ports(Com&Ltd) right click to update driver

if you computer came with a motherboard disk the drivers could be on it

or you might have to download them

rather doing a driver hunt which can take hours

it might take some time being a freeware driver solution

note: it will find all of your outdated drivers

this is a free driver solutions
this will automatically search for and find the correct driver
you will have to update every driver individually once you update you might be asked whether you want to restart or make a system restore point click no to both of these then continue updating each driver free then restart once all of the drivers have been updated

also at cnet
on the home page you should see a search tab just type in what you are looking for
IE: motherboard name sound drivers
you might have to try a few times to get it right

Windows 2000/XP/Vista/7/8 free driver program

Windows XP/2003/Vista/Server 2008/7/8 free drivers

Device Doctor is a freeware Windows application that scans your computer hardware and checks to see if there are new driver updates available for your devices. It also locates drivers for Unidentified Devices in the Windows Device Manager. This tool was designed to be very simple and easy to use
free program, paid update available

hope this helps

NEC Computers &... | Answered on Sep 12, 2012 | 101 views

You can download the device drivers from the NEC WEB site. Please click on this link and select your model computer/notebook and the Windows drivers you require :-.

NEC Computers &... | Answered on Sep 12, 2012 | 322 views

If your computer has a wireless network adapter, Windows will automatically detect wireless networks in range of your computer. You can see a list of wireless networks that Windows has detected in Connect to a Network.

  • Open Connect to a Network by clicking the network icon (eff2d36c-9e0d-4d1a-9859-3af14fa4ccfc_73.jpg or da12251d-1e9a-4032-afae-009876c6c5a3_80.jpg) in the notification area.

If Windows doesn't detect a network that you think is in range of your computer, it could be because of one of the following reasons:

  • The wireless switch on your computer is turned off.

    Many laptops have a wireless switch on the front or side of the computer. If your computer has a switch, make sure it's turned on. Some computers also use a function key combination to turn the switch on or off. Check the information that came with your computer for details on locating the wireless switch.

  • Your computer is too far from the wireless router or access point.

    Move your computer closer to the router or access point. If the computer is portable, try moving it around to determine the range of the wireless signal and the best place to use the computer.

    If you can't get closer to the router or access point, consider buying and installing an external antenna for your wireless network adapter. Many wireless network adapters are set up so that you can attach an external antenna to them, which provides better reception than a built-in antenna. Check the information that came with your wireless network adapter to see if you can install an additional antenna.

  • The wireless router or access point is turned off or isn't working properly.

    There are two things to try:

    • Make sure the router or access point is turned on and that the wireless signal light is illuminated.

    • Reset the router or access point by unplugging it, waiting at least 10 seconds, and then plugging it back in.

NEC Computers &... | Answered on Sep 10, 2012 | 78 views

You can download the device drivers from the NEC WEB site. Please click on this link and select your model computer/notebook and the Windows drivers you require :-.

NEC Computers &... | Answered on Sep 06, 2012 | 171 views

It might be shorted electrolytic capacitors, and/or it may be shorted flyback transformer in the inverter circuit for backlighting.

If you are capable with a soldering iron temove the back of the monitor, and the metal cover over the circuit borads. Place the monitor on it's face and put a magazine between the circuit boards and the metal backplane of the lighting. Carefully power the monitor.

The high pitched buzz might be felt through a screwdriver placed carefully on each of the small transformers for the inverter/ If/when you feel one- mark it with a marker so you can test components in the vicinity for other failed parts. It is possible the transformer itself has failed, and they do make an inexpensive tester for those.

Remove power, and look for any bulging electrolytic capacitors or leaking capacitors. Black or brown residue on top of a capacitor is a pretty good clue of a problem. Usually it is easiest to just replace all pf the electrolytic capacitors with high ripple types or the new polymer types. And test components in the vicinity of the marked transformer. Look for solder joints that need to be reflowed, and resolder them. Replace any components found faulty- although you will get a false failure indication on transistors in the inverter circuit due to low resistance in the circuit- for those remove the transistor and retest.

Before final reassembly, set it up as described above and carefully power up the monitor. If you found the source of the problem, it should turn on just fine.

NEC Computers &... | Answered on Jul 07, 2012 | 235 views

Your battery needs to be replaced.

NEC Computers &... | Answered on Jul 01, 2012 | 30 views

verify you're getting the right voltage from the adapter and also verify the adapter is getting power from the outlet.

If you need further help, reach me via phone at

NEC Computers &... | Answered on Jul 02, 2012 | 26 views

Hello there,

If you want to recover Windows Vista factory settings, go to "Control Panel", then "Backup and Restore Center." There you can choose to restore your operating system using system restore or to restore your system from a previously saved restore point.

Let me know if this helped
  • NEC Computers &... | Answered on Jun 16, 2012 | 218 views

    Could be several things but here are the 2 most likely culprits:

    1. Power Supply not powerful enough.
    2. Computer is overheating

    NEC Computers &... | Answered on Jun 16, 2012 | 25 views

    Problems off computers turning off unexpectedly is usually due to an overheated CPU.
    1) Make sure your CPU fan is working
    2) Make sure your system fan(s) are working
    3) Use task manager to turn off uneeded programs running in the background that might be overtaxing your cpu

    NEC Computers &... | Answered on Jun 15, 2012 | 41 views

    Try and run the the recovery process to factory setting in hopes it will reload with a fresh operational system.

    NEC Computers &... | Answered on May 21, 2012 | 80 views

    Try a pair of headphones to see if that part is working.

    NEC Computers &... | Answered on May 19, 2012 | 151 views

    Get onlineand got to In the google search box type: "NECSupport" (without the quotes and put your manufacturer name before Support). Look for downloads and drivers. Enter your model number and operatingsystem when requested. Download and install the drivers.
    You can also try Driver Guide at:

    NEC Computers &... | Answered on May 17, 2012 | 29 views

    Isolate the problem by putting the old ram back in and see if it works like it did before you upgraded the ram. if it does, you know you've got an issue with the ram.

    If it does not work with the original ram, then either your lcd screen or the video card might have issues.

    NEC Computers &... | Answered on May 12, 2012 | 38 views

    call the police. as far as I know DSI's have no tracking devices in them.

    NEC Computers &... | Answered on May 03, 2012 | 120 views

    Not finding what you are looking for?
    NEC MultiSync LCD1765 17" Flat Panel LCD Monitor Logo

    35 questions posted

    Ask a Question

    Usually answered in minutes!

    Top NEC Computers & Internet Experts

    Steven Wander
    Steven Wander

    Level 3 Expert

    594 Answers

    Alun Cox

    Level 3 Expert

    2679 Answers

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18429 Answers

    Are you a NEC Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides