20 Most Recent Acer AL1711 17" LCD Monitor Questions & Answers


Did you ever find the problem with this unit? BTW, a crappy video cable can cause this or the input impedance has changed on the monitor due to improper connections.

Acer AL1711 17"... | Answered on Nov 06, 2014


Throw it out the window. Acer sucks.

Acer AL1711 17"... | Answered on Sep 24, 2013


try a new graphics card that should cure it .if u don`t want 2 spend out straight away try to borrow 1 from someone first

Acer AL1711 17"... | Answered on Dec 04, 2012


Hello,

A white screen indicates the power supply board is not putting out the correct voltages to properly power the monitor, just the back light. This type of issue is caused by a failure of the filter capacitors on the power board. You can rebuild your power supply board and bring the monitor back to life by just replacing the the bad capacitors. The problem is that model the Acer AL1711 could come with 1 of 4 different power supply boards install depending and the date manufacturer and supply on hand. If you want to repair the monitor if you could open the unit and get either the model number of the power supply board or send a picture of the board to me I will be glad to help you repair the unit and get it back up and running. You can contact me to send the information at tech@ccl-la.com

Acer AL1711 17"... | Answered on Dec 01, 2012


there will be screws on the back which will allow you to remove the stand, then on the back of the monitor their should be 4 screw holes, use these to attach a a flat plate wall bracket to it.
but if you can't remove the stand, then put a clap speaker bracket on the wall & just clap the base of the monitor, as this type of bracket can be adjusted both in & out & up & down.

Acer AL1711 17"... | Answered on Jul 23, 2012


Hi. If you have a video card, try removing and reseating it then see if the lines come back...

It if does, then there's a problem with it and needs either replacement or repair...

^_^

Acer AL1711 17"... | Answered on Jul 19, 2011


You probably have a back light problem. This is caused by a faulty inverter board or a faulty CCFL lamp.
LCD screens and Inverters are available from these WEB sites. www.lcdparts.net http://www.yallstore.com

Acer AL1711 17"... | Answered on Jun 29, 2011


using buttons at the front bottom of ur monitor adjust vertical and horizontal moire..it will become shapr clear.

Acer AL1711 17"... | Answered on Feb 22, 2011


sorry about this terse response, but in my experience "acer" makes junk, get rid of it

Acer AL1711 17"... | Answered on Feb 21, 2011


It does the same when attached to another PC?
This model is known to have bad caps as shown here: http://s807.photobucket.com/albums/yy352/budm/Acer%20AL1711bm/

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.

Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.
Please leave rating if it helps.

Acer AL1711 17"... | Answered on Feb 06, 2011


Look for bad caps with domed tops, replace them in a set.
http://s807.photobucket.com/albums/yy352/budm/Acer%20AL1711bm/

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.

Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.
Please leave rating if it helps.

Acer AL1711 17"... | Answered on Feb 06, 2011


my acer al 1711 monitor goes off after three seconds of applying new settings with resolution chgs or refresh rate the monitor display is blank but the light is green.

Acer AL1711 17"... | Answered on Jan 24, 2011


Check the caps first:
http://s807.photobucket.com/albums/yy352/budm/Acer%20AL1711bm/

If you are going to DIY and already try the monitor with another PC, and have proper tools and know safety precaution then please read on:
Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply (they should be replaced in a set), blown fuses; poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed ACER monitors to get some ideas what to look for: http://s807.photobucket.com/albums/yy352/budm/
Post back what you see inside so we can guide you further and it will help out other people in the future also.

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

http://en.wikipedia.org/wiki/Capacitor_plague

Learn about bad caps: Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

Acer AL1711 17"... | Answered on Nov 29, 2010


If you are going to DIY and have proper tools and know safety precaution then please read on:
Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply (they should be replaced in a set), blown fuses; poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed ACER monitors to get some ideas what to look for: http://s807.photobucket.com/home/budm/allalbums
Post back what you see inside so we can guide you further and it will help out other people in the future also.

Basic LCD monitor troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting

http://en.wikipedia.org/wiki/Capacitor_plague
Learn about bad caps: Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.

Acer AL1711 17"... | Answered on Nov 09, 2010

Not finding what you are looking for?
Acer AL1711 17" LCD Monitor Logo

87 questions posted

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Mohammed Ebrahim M
Mohammed Ebrahim M

Level 3 Expert

633 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...