http://www.fixya.com/support/p395333-samsung_syncmaster_710n_17_in_flatSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comThu, 24 Dec 2009 21:04:34 GMT80http://www.fixya.com/support/t3408420-monitor_not_display_anything_buthi, my monitor does not display anything but the lid light just keep blinking.Thu, 24 Dec 2009 21:04:34 GMThttp://www.fixya.com/support/t1588994-same_problem_not_optimum_modeyes i have same prblem in this samsung monitor lcd model no# 710N they appears on the screen is ( not optimum mode recommend mode 1280x1024 60Hz) I think the problem is the main board but where are the recommended place to buy it the circuitThu, 24 Dec 2009 21:04:34 GMThttp://www.fixya.com/support/t2944514-same_problem_get_boxI have the same problem. I get a box with "not optimum mode. But what I need is a picture of the mainboard with the 50 ohm resistor between pin5 and pin6.Thu, 24 Dec 2009 21:04:34 GMThttp://www.fixya.com/support/t3214423-samsung_syncmaster_710n_monitor_sleepI have the Samsung SyncMaster 710N Monitor. After turning on it displays for a few second then seems to go to sleep? The screen dims to black, and if I turn it off for a while and then back on it repeats the exact same scenario. Is there a way to...Thu, 24 Dec 2009 21:04:34 GMThttp://www.fixya.com/support/t3283163-monitor_view_shrunk_horizontallymonitor view has shrunk horizontallyThu, 24 Dec 2009 21:04:34 GMThttp://www.fixya.com/support/t3257309-recently_enquired_about_access_menuHi i recently enquired about how to access menu on lcd monitor 710n.What i really wanted was how to access the menu on the monitor not the pc.Many Thanks BruceThu, 24 Dec 2009 21:04:34 GMThttp://www.fixya.com/support/t3212998-tuning_instructions_samsungDo you have tuning instructions for the Samsung Sync Master 710?Thu, 24 Dec 2009 21:04:34 GMThttp://www.fixya.com/support/t2346842-when_connect_monitor_computer_sayswhen i connect the monitor to computer it says to change the resolution to 1084x1024 but even after doing that it does not workThu, 24 Dec 2009 21:04:34 GMThttp://www.fixya.com/support/t223929-no_video_pictureI have a Samsung 710N LCD and I cannot get a picture on it, comes up with a box saying that it wants to run in optimal resolution of 1280 x 1024 but when you change the computer to that resolution then it still does not display a picture from the...Thu, 24 Dec 2009 21:04:34 GMThttp://www.fixya.com/support/t1481305-710n_non_optimum_modeWhat was the fix for your 710n Samsung monitor ?Thu, 24 Dec 2009 21:04:34 GMThttp://www.fixya.com/support/t1668905-715v_same_problemOne of my two 715v's has the same problem. Slowly started losing resolution(s) and now has dropped out all together. It used to "reset" by going down to 640x480 and working our way back to 1280x1024. After a while you could get to 1024x768, now...Thu, 24 Dec 2009 21:04:34 GMThttp://www.fixya.com/support/t139064-lcd_problems_help_meHello, I have a Samsung 710N lcd display and I have a problems with changing screen resolution on it... I changed once resolution to 1280x1024x75Hz and then my problems started. A message appeared on my screen that says : Not optimal resolution...Thu, 24 Dec 2009 21:04:34 GMThttp://www.fixya.com/support/t1012937-problem_brightness_monitors_syncmasterHelIo! right after computer inclusions on the monitor screen have a tablet with the message which disturbs to work. The message: brightness of the monitor of 100 %! A problem: how to clean from the screen this tablet so she prevents to read the...Thu, 24 Dec 2009 21:04:34 GMThttp://www.fixya.com/support/t1442278-no_displayWhen i connect the monitor to my computer there is nothing displayed, when i take out the cable, there is a floating "Check cable" box. But as soon as I connect the cable to the computer the check cable box goes away. The green pilot light at lower...Thu, 24 Dec 2009 21:04:34 GMThttp://www.fixya.com/support/t326300-samsung_17_flat_panel_monitor_streaksI bought a Samsung monitor through CompUSA in August of this year (2007), and it was fine until a month or so ago - now, after random amounts of time, streaks will apear that make it look as if anything being displayed is moving by really fast to the...Thu, 24 Dec 2009 21:04:34 GMThttp://www.fixya.com/support/t1128610-710n_no_display_problemHi, I have the EXACT same problem as you. Would you happen to have found a solution yet? Thanks!Thu, 24 Dec 2009 21:04:34 GMThttp://www.fixya.com/support/t904772-samsung_syncmaster_740n_monitor_problemit displays "not optimum mode...." I tried pulling all the cables of the monitor and power, tried waiting for 5 minutes to reboot it; nothing happened. It still displays the same msg. Pls help. Thank you.Thu, 24 Dec 2009 21:04:34 GMThttp://www.fixya.com/support/t926261-not_optimum_mode_recommended_modeDisplay provides the message shown in subject line. All settings are correct and apprear to be working.Thu, 24 Dec 2009 21:04:34 GMThttp://www.fixya.com/support/t128016-no_video_outputI have a second hand samsung syncmaster 710N LCD monitor. After connecting power and data cable properly, i turn on my pc. But there's nothing picture's come out. The power green LED is on. Could u tell me what would be the possible fault? If i...Thu, 24 Dec 2009 21:04:34 GMThttp://www.fixya.com/support/t182040-monitor_goes_off_after_working_someThe monitor goes off after working for some time. Then even if we reboot it wont work for some time. After some time it works as normal.Thu, 24 Dec 2009 21:04:34 GMThttp://www.fixya.com/support/t145045-problem_lcd_screen_stays_white_brightHi please help I have a relatively new model SyncMaster 710n monitor and after few days a notice that when I shutdown my SyncMaster and after few hours turn it on and again shut it down on power switch he stays with bright white screen like some...Thu, 24 Dec 2009 21:04:34 GMThttp://www.fixya.com/support/t83289-display_problemI have an AMD1800+ with onboard SiS630/730 grahpics. Recently purchased a Samsung SynMaster 710N monitor. First, I have updated the software for both drivers (monitor & SiS). No conflicts show anyway in my system. The problem is, on active...Thu, 24 Dec 2009 21:04:34 GMThttp://www.fixya.com/support/t175324-compatability_samsung_710n_3d_rageI just hooked up a Samsung 710N 17" LCD monitor. Previously I had a Samsung 760V LCD monitor working normally with thesame 3D Rage II+PCI card. The new monitor screen is too blue/light purple. The software used for adjusting the Samsung 710N...Thu, 24 Dec 2009 21:04:34 GMThttp://www.fixya.com/support/t325984-need_lcd_inverter_sharp_15_monitorI am trying to find a INV15-4A8, P/N 3BS0038011, LCD Inverter for Sharp 15? TFT LQ150X1DG51. The one in my monitor is toast and I can't seem to find another like it. ThanksThu, 24 Dec 2009 21:04:34 GMThttp://www.fixya.com/support/t342444-wyse_terminalI have an old Wyse (WY 60) terminal installed as an elevator control monitor. This unit was recently replaced with a rebuild (by elevator contractor) and everything seems to work however, I cannot get reports to print. Info can be viewed on screen so...Thu, 24 Dec 2009 21:04:34 GMThttp://www.fixya.com/support/t352329-hp_pavilion_monitor_flashes_offOn start-up, the screen flashes off and on every few seconds, then after about 2 hours suddenly starts working. When I say flashes off and on I mean the screen is black, and then for a millisecond the desktop picture will appear and then it goes...Thu, 24 Dec 2009 21:04:34 GMThttp://www.fixya.com/support/t374904-acer_24_inch_tft_monitorI have had the monitor for 4 weeks now. As of 5 days ago when I turn it on, the ACER logo just blinks and there is no picture. Yesterday I figure I would see how long it does this. So I waited and it takes about 90 seconds before I get a picture. ...Thu, 24 Dec 2009 21:04:34 GMThttp://www.fixya.com/support/t390969-viewsonic_vg170m_19_in_flat_screenI just purchased this monitor last week (used) and it has been working fine since last Thursday. About two hours ago I was paying a bill online and I walked away from the computer to get something and when I came back the screen was kinda of pastel...Thu, 24 Dec 2009 21:04:34 GMThttp://www.fixya.com/support/t399229-green_led_light_flashing_700p_proviewhello, i have a proview 17in flat panel computer monitor model #700p that will not show anything, and the green power led indicator is on but flashing slowly. can you guys please help me. thanks The green light on the power supply blinks but the...Thu, 24 Dec 2009 21:04:34 GMThttp://www.fixya.com/support/t400704-monitor_power_suppplyMy computer monitor power supply is not coming. Computer is fine. If connect the computer to another monitor it works fine. I changed the power cord no help. Can you suggest something to find the solution for this. Thanks SudhaThu, 24 Dec 2009 21:04:34 GMT