http://www.fixya.com/support/p394985-benq_fp737s_d_black_silver_17_lcdSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comTue, 07 Oct 2008 18:17:30 GMT80http://www.fixya.com/support/t968155-benq_fp737_monitormonitor is black, we turn the computer on and power button turns green but screen pls black the tower has been checked and the video card has been changed still noting on the monitor. can you pls help me. thanksTue, 07 Oct 2008 18:17:30 GMThttp://www.fixya.com/support/t1046439-white_screenHi u left a solution conserning my benq lcd with a white screen conserning capacitors as i hav checked all caps on power board and can see no swelling or leacking are there any particular caps i should be looking at thanksTue, 07 Oct 2008 18:17:30 GMThttp://www.fixya.com/support/t1030717-benq_fp737_d_17_lcd_monitorThe monitor goes black after a while when on the net. Have to re-boot and it comes on again for a while.Tue, 07 Oct 2008 18:17:30 GMThttp://www.fixya.com/support/t890134-benq_monitoronly displays the benq for a split second. you said something about a capacitor. the only trouble im getting is getting inside to check it out. and could it be the lamp?Tue, 07 Oct 2008 18:17:30 GMThttp://www.fixya.com/support/t981207-white_screenhi bought a benq fp737s 17 inch monitor when it is turned on u get green light but a white screen ,screen stays white for a bit then gose black then white again for a short time ,then returns to black and the power light gose orange hope u can help...Tue, 07 Oct 2008 18:17:30 GMThttp://www.fixya.com/support/t366016-lcd_monitor_went_blankMy BenQ LCD monitor went blank when I was busy with my work. It is not my tower because I tested it with a different monitor. Normally if you power up a monitor, it displays the following massage ?No Signal Detected? but myne doesn?t anymore!...Tue, 07 Oct 2008 18:17:30 GMThttp://www.fixya.com/support/t629925-benq_fp737s_monitor_failuremy benq fp737s lcd monitor will only power on for milli-seconds and then turns itself off automatically. i have had it since sept 2005. any ideas? i'd prefer not to throw it away. thanksTue, 07 Oct 2008 18:17:30 GMThttp://www.fixya.com/support/t141707-light_green_but_monitor_just_goes_splitI found a few people with similar problems, but since I have soldered two things in my life I am afraid to break it if I just try random things. Ok so when I turn the monitor on the BenQ logo appears very dimmly and a split second later it...Tue, 07 Oct 2008 18:17:30 GMThttp://www.fixya.com/support/t463358-benq_17_lcd_monitor_faultBenq17"lcd monitor Computer running with valid output. Turn on lcd, no benq logo, bands of moving horizontal and vertical lines appear for about 3 seconds. Screen then goes blank. Lcd light stays blue to indicate video present. Suspect video input...Tue, 07 Oct 2008 18:17:30 GMThttp://www.fixya.com/support/t643181-lcd_panel_no_displayThe panel showns no display but BENQ flashes on and offTue, 07 Oct 2008 18:17:30 GMThttp://www.fixya.com/support/t587350-benq_fp737_lcd_displayWhen I power off the system by wall socket, The display (Benq FP737) of my PC also off. But the problem is, when I on the system again, the display not on automatically. So, I need to on it by power switch each time. I want to on it automatically...Tue, 07 Oct 2008 18:17:30 GMThttp://www.fixya.com/support/t626591-benq_fp737s_monitor_deadhi there, ive read your info on fixing but having probs finding the transistors you mention. i have board in front of me and can only see c707 c708 c709 . how do i test these to see if they dead. oh the ceramic fuse is ok too...andyTue, 07 Oct 2008 18:17:30 GMThttp://www.fixya.com/support/t501426-benq_fp737sEvery 10 to 15 minutes Input select (D-Sub or DVI) appears on the screen, If you change it to DVI it will automatically default back to D-Sub.If you go to the monitor and click on the menu button and go to Miscellaneous and select Input select. This...Tue, 07 Oct 2008 18:17:30 GMThttp://www.fixya.com/support/t600969-still_no_displaythe voltage output of PQ3RD23 is 3.3V. i've tested all four c5707 transistor. One of them is shorted so i replaced it with a new one. Still no display on my LCD. what could be the problem?Tue, 07 Oct 2008 18:17:30 GMThttp://www.fixya.com/support/t152538-wiress_mixed_upMy wires are mixed up, if the LCD is upside down on the left side there is 8 wires, 4 groups of 2 wires. 2blue and 2pink. how must it be pluged in?Tue, 07 Oct 2008 18:17:30 GMThttp://www.fixya.com/support/t313514-benq_lcdHi My benq lcd does not lid up and i believe it a circuit board problem. Where can i purchase a circuit board for my benq lcd. thanksTue, 07 Oct 2008 18:17:30 GMThttp://www.fixya.com/support/t392525-spare_partsWhere can I buy spare parts for BenQ LCD monitors?Tue, 07 Oct 2008 18:17:30 GMThttp://www.fixya.com/support/t368349-benq_fp737s_d_17_lcd_monitor_blankI am responding to Jan.22/08 solution #3 posted by Bendys. Would you please be able to go into a little more detail on how to get to fuse? ie. Is fuse at bottom under foil tape or left side under foil tape? Do I grey metal backing where saudered...Tue, 07 Oct 2008 18:17:30 GMThttp://www.fixya.com/support/t351146-nec_lcd1720mFlickering LED but not video. Pressing the power button does nothing. Monitor had a clicking sound , but this stopped. Power supply board is Benq and has 2 caps with bulging tops. Do you carry this board?Tue, 07 Oct 2008 18:17:30 GMThttp://www.fixya.com/support/t210619-monitor_doesnt_workI had this monitor for about 2 and a half years.It is a BenQ FP737S-D 17" LCD. Well when i turn the monitor on, nothing appears its all black but the green LED light is on. Just about an hour ago it was working perfectly. ThanksTue, 07 Oct 2008 18:17:30 GMThttp://www.fixya.com/support/t182472-screen_displays_fine_second_goes_blankI have this screen for about a year now. About two weeks ago this strange problem had started to occur. Whenever i turn my computer on, the screen displays fine for about a second, then turns blank while the led stays green. when turning the screen...Tue, 07 Oct 2008 18:17:30 GMThttp://www.fixya.com/support/t292957-find_inverter_board_x9g_komodo_iiiI found two busted Caps and need to replace my main board because it is three years old. I can find one any where except at Sceptre and they want $110.00 plus $25.00 to ship and that is not worth the price. Can any one tell me where to buy this...Tue, 07 Oct 2008 18:17:30 GMThttp://www.fixya.com/support/t199682-benq_monitor_flashes_offMy 17" Benq monitor has wont work. It flashes off and on continiously. When its on it only on for a milisecond, you can just see the benq logo screen then it turns off, and back on a milisecond later.Tue, 07 Oct 2008 18:17:30 GMThttp://www.fixya.com/support/t149396-blank_scren_led_stays_green_only_oneHi, I have had this screen for 2 years now. One day, it stopped working... The screen is blank and the LED is off. If I press the power button, the screen displays a BenQ logo and the front LED turns on (green); 1-2 second(s) later, the screen...Tue, 07 Oct 2008 18:17:30 GMThttp://www.fixya.com/support/t193465-sink_problemwhen moniter start then with in two hour in one or two times sink one or two seconds only above sideTue, 07 Oct 2008 18:17:30 GMThttp://www.fixya.com/support/t194269-internet_problemmy internet not working properly .it stops after working for few seccondsTue, 07 Oct 2008 18:17:30 GMThttp://www.fixya.com/support/t208901-monitor_resolution_changedMy Monitor is DAEWOO 15". I am working on 800x600 resolution. I want to change to 1024x768 but it can't be changed. Whenever I try to change,it will try by displaying black screen for a while but couldn't be changed. I have downloaded a latest...Tue, 07 Oct 2008 18:17:30 GMThttp://www.fixya.com/support/t219225-sylvania_proview_cl2072b_circuit_boardI have discovered that the fuse on the circuit board as blown. I've jumperd it with a very tiny piece of wire wrap wire to see if the monitor would come back on and it does. I'm a bit uncomfortable with leaving it in this condition, but I have no way...Tue, 07 Oct 2008 18:17:30 GMThttp://www.fixya.com/support/t235213-3yr_old_got_ahold_monitorWe have an older computer that I had decided to give to my 5 yr old daughter so that she could play with educational programs. Well no sooner than I had it set up and running perfectly fine, I caught my 3 yr old daughter pushing on the buttons on the...Tue, 07 Oct 2008 18:17:30 GMThttp://www.fixya.com/support/t257977-problem_monitorMy monitor looks like it has a drop shadow...all the type has a lightened verson of the text or graphics just to the right of the text.Tue, 07 Oct 2008 18:17:30 GMT