20 Most Recent
Princeton Digital LCD17 17" Flat Panel LCD Monitor Questions & Answers
My laptop moniter turns on as usual with the
hello
"I start in safe mode as normal."
safe mode is not a normal thing during your windows boot sequence :)
if your display works ok until those 10 minutes of safe mode are over i would say that reinstalling your windows operating system will most likely solve your monitor issues :)
10/4/2012 2:42:30 PM •
Princeton...
•
Answered
on Oct 04, 2012
HL710S Daewoo Monitor
I HAVE A 17 INCH MONITOR AND IT WONT POWER ON MY POWER WENT OUT AND NOW IT WONT POWER ON AFTER POWER WENT BACK ON
9/2/2010 1:52:55 AM •
Princeton...
•
Answered
on Sep 02, 2010
Dead. External power supply is good 12V but
my 12 power supply was only 500ma, not the 4a needed. Got the monitor to power up but now the screen goes dark after 2 sec. Looks like a bad backlight issue. I'll replace the inverter board.
thanks
12/9/2009 2:20:33 PM •
Princeton...
•
Answered
on Dec 09, 2009
Power up problem
http://www.lcdpart.com/Products/qpwbgl9931dld.html
Have fun.
9/18/2007 3:59:45 PM •
Princeton...
•
Answered
on Sep 18, 2007
LCD17 Flat panel
Check this link;
http://www.lcdpart.com/Products/qpwbgl9931dld.html
They sell it for $69.99 and also list other alternative part numbers / manufacturers.
Hope this helps, please ask again if you need more options :)
9/17/2007 1:05:05 PM •
Princeton...
•
Answered
on Sep 17, 2007
Power issue with LCD Monitor
Try another power adaptor.
Check the delivered voltage and go get a universal power adaptor that has a switched for varios voltages and a number of connectors.
Simply match connector to the voltage switch.
5/22/2007 3:38:54 PM •
Princeton...
•
Answered
on May 22, 2007
White screen covers desktop
Ah A simple one. simply unplug the power adaptor and take itno a repair place or radio shack and ask them to measure the output to see if theres 12 volts DC on the plug?? Good Luck
6/14/2006 6:44:24 PM •
Princeton...
•
Answered
on Jun 14, 2006
Monitor say out of range
Just connect the monitor to another computer and change the screen resolution to 1024 x 768 or less. This means that the computer that is connected to that monitor, can not display the mode that your monitor is in right now.
1/4/2014 5:22:26 PM •
Princeton...
•
Answered
on Jan 04, 2014
The monitor shuts off. Turning the power off
the monitor is going into power saving mode ... it can happen if it is not receiving any signal from the pc ( pc is not running or booted properly, bad video cable connection monitor to pc) or the pc is itself in suspend/standby mode.
7/25/2011 3:51:03 PM •
Princeton...
•
Answered
on Jul 25, 2011
Not finding what you are looking for?