20 Most Recent Proview PL913B 19" Flat Panel LCD Monitor - Page 4 Questions & Answers


The model number given does not get listed in the proview driver download page. Please check that once again and click on the link below

http://proview.net/Support/Download.aspx

choose monitor, then choose the model number and in the material drop down list choose driver to see the driver availability. Then download the appropriate driver.

Proview... | Answered on Feb 08, 2012


sirrichard, The first thing you should have typed out is the model number and then the "date of manufacture", all of which could be found the rear of the unit!! Next thing is PROVE that your pc not causing "black screen of death" symptom. Connect "known good" monitor to your pc. Next prove the monitor will do same thing at another pc if possible. Do a reply with more info so we can be of some help to you and your lcd monitor's "black screen of death" symptom. 12fixlouie

Proview... | Answered on Jan 09, 2012


I agree, the website is not very helpful. Also a web search comes up with nothing. Why not send an email to Proview? You may strike lucky!

cheers

Proview... | Answered on Jan 08, 2012


Test all leads that attach to your hard drive including electrical extensions,IDE,SATA

the leads from your ((motherboard to your hard drive)) make sure they have a secure connections and are not faulty or just replace them they might be faulty


make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even the electical extensions


even something as small as an electrical fan and its lead can cause you problems or just replace them they could be faulty a computer needs all electrical power and data to continue through every working device and to have an end so any faulty leads will end up with a computer error


make sure your graphics card is securely seated with no dust built up or in the socket

if you remove your graphics check the socket to make sure its dust free

restart your computer then reinstall it this should activate found new hardware wizard

hope this helps you

Proview... | Answered on Nov 21, 2011


You had set the PC resolution too high for the monitor to work, please read here to get it back to the native resolution of the monitor.
http://www.fixya.com/support/r4873371-fixing_out_range_format_not_supported


Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Parts: http://interliquidparts.com/

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.

Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

Proview... | Answered on Aug 30, 2011


There is only one place on the computer where a monitor will fit.
The exception is if you have an add-on video card. In this case, don't plug the monitor in the connector next to all the other wires. There will be a separate connector lower down on the computer case. Use that one.

Proview... | Answered on Aug 03, 2011


Well, if the adjustment buttons don't work, then probably the control unit in the monitor is broken, or a key is stuck. If the control unit needs servicing, I doubt if it's feasible to have it repaired, given the fact that it's an old monitor and new or used nice slim LCD monitors can be purchased cheaply nowadays.

Proview... | Answered on Jul 24, 2011


You will need new LCD panel, not worth it.
See example here: http://s807.photobucket.com/albums/yy352/budm/LCD%20panel/

Proview... | Answered on Jun 05, 2011


Adjust the brightness using the monitor buttons.

Proview... | Answered on May 10, 2011


http://www.amazon.com/power-adapter-Proview-PRO756-monitor/dp/B0028TCJCI

12VDC 5A.

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

Proview... | Answered on Mar 29, 2011


if you use Windows System, right click on Desktop -> Click "Properties" -> Click "Setting" Tab, you can know VGA Mode support for your Monitor.

Proview... | Answered on Mar 02, 2011


Please check the video cable connections at both ends. Try it with another PC to make sure it is not PC video card problem also.

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
Or www.digikey.com, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC series.
Please post back what you find.
Please leave rating if it helps.

Proview... | Answered on Jan 30, 2011


If a monitor won't turn on, the problem can usually be traced to the power supply. Check if the fuse is blown or if the capacitors have bulged and failed. Failed capacitors are the most common problem with LCD monitors. If any of the capacitors are blown, would recomend that they all be replaced and that usually get it going again. There is a company that sells replacement capacitors for any monitor. http://www.lcdalternatives.com/ Hope this helps you.

Proview... | Answered on Dec 23, 2010


right click and press the refresh button

Proview... | Answered on Oct 25, 2010


It is possible that the main power has failed, it can be from the fuse to the Switch mode supply driver.
Check on rectifier, capacitor, Sm driver transistor,Sm transformer, the feq.oscillators for Sm,output sections.
Trace with a voltage check to identify and confirrm..

Proview... | Answered on Aug 24, 2010


Check all connections, cable is hopefully good. Then go into maybe the video card is either faulty or that maybe the monitor you want to use cant use a setting that the PC is trying to use (1280x1024 from the pc where the monitor can only go 800x600 for example) also check the Hz rating and make sure that the computers on the lowest Hz setting. Maybe the monitor can't handle the Hz the computer wants to use.
Assuming your in windows... and have no other means of getting to the settings try booting the system.. as soon as it 'beep's tap the F8 key several times and you should be able to get into the safe mode option. after you get in there get into the video settings and try to adjust the resolution and save it. after that you can reboot and it should come up as what you saved.. then you can tinker with the setting to figure out what the monitor can do. Next time try to give a model number and maker of the monitor. :)

Proview... | Answered on Aug 03, 2010


It's a problem that takes a qualified technician to repair.

Take a look at:
http://ab.allpages.com/fort-mcmurray/shopping-shopping-services/appliances-household-commercial/

for several "TV repair" listings in your city.

Proview... | Answered on Aug 01, 2010


Make sure all your connections are tight and you have power to your speakers...Then go Start>Control Panel>Sound and Hardware>Sound, after you are in here make sure that your speakers are selected as default device.
Hope this helps, pls rate

Proview... | Answered on Mar 19, 2010

Not finding what you are looking for?
Proview PL913B 19" Flat Panel LCD Monitor Logo

39 questions posted

Ask a Question

Usually answered in minutes!

Top Proview Computers & Internet Experts

 Mike M
Mike M

Level 3 Expert

3324 Answers

Siul Oyaratgam

Level 2 Expert

317 Answers

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

2008 Answers

Are you a Proview Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Proview Computers & Internet

  • Proview Computers & Internet

Most Popular Question

monitor black white

  • Computers & Internet
Loading...