20 Most Recent Relisys TL 766 Monitor Questions & Answers

My Ultimate Human Body DVD requires a resolution

Here is a FREE download that may help you!

Know this may be a DEMO version and may be crippled?

How to Resize Video for Smaller Resolution and Size

Anthony

Relisys TL 766... | Answered on Jan 07, 2018

1 Answer

RELISYS TL766 17" TFT MONITOR

Hi,I have same monitor and problem,still unable to resolve, I been told to try the monitor on other PC to see if the actual problem is in the monitor or originates from the PC.

Relisys TL 766... | Answered on Dec 28, 2015

0 Answers

Service manual for relisys tl766

Relisys TL 766... | Posted on Mar 22, 2013 | Be the first to answer

0 Answers

Autoadjust menu keeps appearing

Relisys TL 766... | Posted on Feb 21, 2013 | Be the first to answer

2 Answers

Check if the sound is enabled on your PC then check for wiring that goes to the monitor.

Do you have more information or questions?
The more information you provide to us, the better we can help.

Good luck!

Relisys TL 766... | Answered on Jul 19, 2012

0 Answers

How to reset

Relisys TL 766... | Posted on Jan 31, 2012 | Be the first to answer

9 Answers

OSD function menu

ok i think i know how to get rid of it now, i did an ATX reset on it and it does go away HOWEVER as soon as you push the menu button again it comes back.

ATX Reset: unplug the main power lead then hold down the power button on the front of the monitor for about 10 seconds, plug the mains lead back in and then switch the monitor on.

Relisys TL 766... | Answered on Dec 15, 2011

1 Answer

I have a Relisys TL766-RU(B/S)

90% of the LCD monitors failure are due to bad caps.
As you can see here:
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
If you have proper tools, you can do DIY repair.
If you are going to DIY and already try the monitor with another PC, and have proper tools and know safety precaution then please read on:
Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply (they should be replaced in a set), blown fuses; poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed monitors to get some ideas what to look for: http://s807.photobucket.com/albums/yy352/budm/
Post back what you see inside so we can guide you further and it will help out other people in the future also.

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Parts: http://interliquidparts.com/

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.

Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

Relisys TL 766... | Answered on Aug 17, 2011

1 Answer

I have a green line on the monitor to the right

See my tip here: http://www.fixya.com/support/r9352105-fix_colored_vertical_lines_lcd_display

Relisys TL 766... | Answered on Jun 19, 2011

0 Answers

Estoybuscando el diagrama electronico del monitor

Relisys TL 766... | Posted on Feb 28, 2011 | Be the first to answer

0 Answers

Monitor relesys tl 766re si accende e dopo un

Relisys TL 766... | Posted on Jan 08, 2011 | Be the first to answer

1 Answer

After moving the monitor the colours became

It sounds like there is a problem with your display cable, move around the cable that goes to the computer from the monitor and see if it changes, it sounds like your cable is broken and you might need to replace it.

Relisys TL 766... | Answered on Dec 04, 2010

1 Answer

Out of range appears on the screen

Your PC Video resolution is set to high for your LCD monitor to display.
http://www.fixya.com/support/r4873371-fixing_out_range_format_not_supported

http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague

Relisys TL 766... | Answered on Jul 04, 2010

1 Answer

On then went off but power light is standby moode...

Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply, blown fuses, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed monitors to get some ideas what to look for: http://s807.photobucket.com/home/budm/allalbums
Post back what you see inside so we can guide you further and it will help out other people in the future also.
http://en.wikipedia.org/wiki/Capacitor_plague
http://www.badcaps.net

Relisys TL 766... | Answered on May 21, 2010

1 Answer

Monitor ripples when scrolling

update your video drivers.

Relisys TL 766... | Answered on Apr 22, 2010

1 Answer

I got horizontal lines occasionally across my

try to open back cover and remove / insert all connector that you can found including ribbon wire check also soldered side for possible lost contact.

Relisys TL 766... | Answered on Apr 10, 2010

1 Answer

Screen ripples when you scroll up or down,

check for new directx or vga drivers to fix this issue

Relisys TL 766... | Answered on Feb 26, 2010

1 Answer

The monitor keeps turning off for no rreason while

theinstall, The internal AC line to DC power supply will need to be investigated for bad solder joints and or bad aluminium "can" electrolytic filter capacitors. 12fixlouie

Relisys TL 766... | Answered on Jan 18, 2010

1 Answer