http://www.fixya.com/support/p394454-sceptre_x9g_komodo_iv_19_in_flat_panelSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comFri, 08 Jan 2010 23:41:43 GMT80http://www.fixya.com/support/t3645412-screen_comes_1_second_goes_outscreen comes on for 1 second then goes outFri, 08 Jan 2010 23:41:43 GMThttp://www.fixya.com/support/t3368709-ve_got_sceptre_19_in_monitor_typicalI've got a Sceptre 19 in monitor with the typical "on for a sec and goes dark". I removed the 6 screws on the back of the case but obviously there is a further step thats alluding me...how to you crack the case??Fri, 08 Jan 2010 23:41:43 GMThttp://www.fixya.com/support/t3220805-sceptre_x9g_will_work_10_mins_orMy Sceptre X9G Will Work for a 10 mins or so then starts to Cycle on and off sometimes every few seconds and sometimes for 10 mins or so. I have changed power and video (15pin D Vid) cord. Connecting to a different computer gives the same results....Fri, 08 Jan 2010 23:41:43 GMThttp://www.fixya.com/support/t3258291-deardear.. my LCD is no power veiw,i turn on the lamp on LCD is yellow color then after 2 seconds the color will be change oren color..so how my email hairee82h2@yahoo.comFri, 08 Jan 2010 23:41:43 GMThttp://www.fixya.com/support/t747592-same_flashing_problemMy Sceptre 17in lcd is doing the same 1 second display and then shutting off, has anyone figured out that problem yet?Fri, 08 Jan 2010 23:41:43 GMThttp://www.fixya.com/support/t258182-sceptre_x9g_komodo_ivMy Sceptre LCD X9G-Komodo IV is no longer worked as usual, the screen dos not have video. If I press the button OFF and ON again, the monitor will display information for about 1 second and after that the screen is blanked/blacked out even the power...Fri, 08 Jan 2010 23:41:43 GMThttp://www.fixya.com/support/t3095948-same_problem_hereI loved this monitor up until about a month ago, now I have the same problem as you guys. If I repeatedly turn the power button off and then on again, I eventually get the display to stay up. I expect I'll have to buy another monitor soon and it sure...Fri, 08 Jan 2010 23:41:43 GMThttp://www.fixya.com/support/t791364-scepyre_17_in_x7Are the capacitators 740uf 25v screw in or snap in?Fri, 08 Jan 2010 23:41:43 GMThttp://www.fixya.com/support/t1549109-gateway_lcd_powers_but_no_pictureI have a Gateway FPD1730 LCD monitor. When I plug it into my Gateway 500x desktop the power light turns green and then says "Power Saving Mode" and then it goes black. It will occasionally flash on and have a picture and then go off. When I unplug...Fri, 08 Jan 2010 23:41:43 GMThttp://www.fixya.com/support/t567475-sceptre_x9g_komodo_iv_19_inDisplay went out, only comes on for about a second when power button is pushed off and on. Opened monitor up, looks like two coils labeled L1 and L2 are burned at the top. The two caps most people are talking about c114 and c115 look just fine....Fri, 08 Jan 2010 23:41:43 GMThttp://www.fixya.com/support/t307133-sceptre_dclcd19_monitor_white_screenTHIS monitor screen goes white when I turn it on . All controls stop functioning until I power it off a lot of times and sometimes it may work.Fri, 08 Jan 2010 23:41:43 GMThttp://www.fixya.com/support/t776030-sceptre_lcd_no_displayMy Sceptre LCD X9G-Komodo IV is no longer worked as usual, the screen stopped displaying. If I press the button OFF and ON again, the monitor will display information for about 1 second and after that the screen is blanked/blacked out even the power...Fri, 08 Jan 2010 23:41:43 GMThttp://www.fixya.com/support/t694608-dead_scepter_x22_monitorHow did you take apart the sceptre monitor? im trying to get it open to see if i have a blown capacitor or 2. It turns on but the led blinks like its in standby mode. I only see 3 screws on the back, otherwise cant get it apartFri, 08 Jan 2010 23:41:43 GMThttp://www.fixya.com/support/t304902-connecting_second_monitorI am connecting a second monitor directly to my sceptre x9g monitor. I have changed the settings to reflect second monitor. The second monitor is displayed in device manager. Still am not getting anything except "check signal cable" displayed on...Fri, 08 Jan 2010 23:41:43 GMThttp://www.fixya.com/support/t646906-black_screenflashes when i wiggle the inverterFri, 08 Jan 2010 23:41:43 GMThttp://www.fixya.com/support/t194042-sceptre_x9g_komodo_ivThis monitor is identical to the planar pe191m. "anyone care" posted he/she had repaired 15 of these with 2 bad caps in the power supply. I have 4 of these monitors and was wondering if "anyone care" or any one else could suggest which caps normally...Fri, 08 Jan 2010 23:41:43 GMThttp://www.fixya.com/support/t202914-sceptre_komodo_2I am having the black screen problem when turning the monitor on. I have read to replace the two capacitors but can someone tell me how to do this and exactly where is it located( in the monitor itself or in the computer) Also, where can I get the...Fri, 08 Jan 2010 23:41:43 GMThttp://www.fixya.com/support/t357157-monitor_problemI have a Sceptre Monitor (Ultra High Speed Response Time). Suddenly the images on the monitor screen turned to the right 90 degrees. I have no idea why, and don't know how to get the image back to normal on monitor. I have turned computer off, but...Fri, 08 Jan 2010 23:41:43 GMThttp://www.fixya.com/support/t204716-replacing_capacitor_lcd_monitorI wanted to know if replacing a 470uf 25v capacitor for a 470uf 35v on a LCD Monitor would be fine. Someone said it was fine as long as you're replacing it for higher voltage. I just want to make sure before I do that. thanks.Fri, 08 Jan 2010 23:41:43 GMThttp://www.fixya.com/support/t211050-find_capacitorHi, I have the Sceptre monitor with the same problem - power light on but display black. Where do I purchase replacement capacitors? When I get them, do i just clip out the old ones and solder the new ones in place? Thanks - sorry if these are...Fri, 08 Jan 2010 23:41:43 GMThttp://www.fixya.com/support/t217036-sceptre_x9g_komodo_iv_19_monitorThe monitor comes on but will only work for about 5 minutes before it goes blank. The power/signal light stays on but there is no display. I can turn it off for a few minutes and then turn it back on and it will work. However, it go back off in...Fri, 08 Jan 2010 23:41:43 GMThttp://www.fixya.com/support/t203974-unidentifiable_capacitorAfter opening up my monitor I noticed on the power supply side a capacitor that is slightly bulging, however the number on the capacitor was EJ(M)105(degree symbol)C (c)0424. A guy at Radio Shack said it wasn't a capacitor with those numbers on it. ...Fri, 08 Jan 2010 23:41:43 GMThttp://www.fixya.com/support/t148453-flashing_green_power_indicator_lampI turned off and disconnected the monitor to try a different one. When I try to hook up the Sceptre again all I get is a black screen and a flashing indicator lamp. I have tested both power and monitor cables and they are good. What am I missing?? ...Fri, 08 Jan 2010 23:41:43 GMThttp://www.fixya.com/support/t102417-sceptre_lcd_no_displayMy Sceptre LCD X9G-Komodo IV is no longer worked as usual, the screen stopped displaying. If I press the button OFF and ON again, the monitor will display information for about 1 second and after that the screen is blanked/blacked out even the power...Fri, 08 Jan 2010 23:41:43 GMThttp://www.fixya.com/support/t352913-dual_monitors_in_xp_pro_hp_pavilionMy HP Laptop has the NVIDIA GeForce FX Go5200 adapter. I went in to the "display" options in the control panel, and I can see the second monitor (an I-Inc Model CY199) as monitor #2, although Windows sees it as a "plug and play" monitor. I can get...Fri, 08 Jan 2010 23:41:43 GMThttp://www.fixya.com/support/t384317-benq_fp222wEvery time I switch on, or the signal to the monitor changes, the message "Input D-sub" appears. This is very distracting. Is there any way to stop this? Thanks DonFri, 08 Jan 2010 23:41:43 GMThttp://www.fixya.com/support/t396137-hooking_monitor_computer_cableI purchased a new LG 24" Flatron monitor yesterday from Future Shop. It was a floor model so I do not have instructions is there any way you could send me an instruction manual? I am trying to figure out how I connect to our satelite. Email address...Fri, 08 Jan 2010 23:41:43 GMThttp://www.fixya.com/support/t398441-want_become_motherboard_analizerhello, i want to know that who i find the correct prob. of any motherboard step by step though a dead motherboard. i want also use motherboard postcard to find the problem and solve the problem. which code show me the prob. and how can i find it....Fri, 08 Jan 2010 23:41:43 GMThttp://www.fixya.com/support/t401177-memoryI seek memory of monitor trc 15" Megavision thanks!Fri, 08 Jan 2010 23:41:43 GMThttp://www.fixya.com/support/t411017-using_monitor_helpI have a Tosihba Satellite laptop computer, I cracked my screen, I need to use my computer for the image software, is there anyway I can hook up my Tosihba to my Acer laptop to use only the monitor.Fri, 08 Jan 2010 23:41:43 GMT