I have a sceptre monitor that will not come on the blue power indicator blinks but there is nothing...
(More)
I have a sceptre monitor that will not come on the blue power indicator blinks but there is nothing on the monitor
I have had the ViewSonic VX924 for about 1.5 years. Just this morning when I moved the mouse to wake...
(More)
I have had the ViewSonic VX924 for about 1.5 years. Just this morning when I moved the mouse to wake up the monitor, the screen flashed an image for a split second and then went blank. However, I noticed that the green LED flashes as well.
I have plugged in other computers to the monitor and all display the same result. They work fine on a different monitor.
I have read in the manual a working that too high a resolution and refresh rate can "permanently damage" the monitor. Any help appreciated.
I'm not sure if I even chose the right monitor as my product. But I have had a KDSusa monitor that would go black when I booted it up. If I turned the monitor off then back on it would display an image for maybe 2 seconds tops then go black again. I sent it in and they sent me a diff. monitor. This one did the same thing after having it for a while. My dad said the brand must be cheap so he gave me his 19" LCD. This monitor I had for a few months and it has started the same thing but this monitor if I turn it off then back on about 5-6 times it will stay on. What could this be?
Monitor has no power (ie. no light). Has integrated pwr/aud/logic/inv board. No visible signs of any...
(More)
Monitor has no power (ie. no light). Has integrated pwr/aud/logic/inv board. No visible signs of any problems. Only have 1.6v at pwr switch, and 5v going to logic side of board. Board is model 490491200100R, can't find any information on this board.
I have a 19" Microtek 997M monitor that only stays on for a second or two then goes to a black...
(More)
I have a 19" Microtek 997M monitor that only stays on for a second or two then goes to a black screen. If I turn the power off and back on the screen turns on a gain for a second or two and turns off again. At the same time the power on light continues to stay on. I saw the other remedies to fix this problem but want to know if it will also work for the Microtek as there are 6 capacitors (pairs of two) next to the transformer. I can't tell what size twwo of them are as there is only jibberish stamped on the can. Any suggestions?
hello. how did you reset the eprom on the lcd monitor? my monitor turns on for 2 seconds then shuts...
(More)
hello. how did you reset the eprom on the lcd monitor? my monitor turns on for 2 seconds then shuts off. i took it apart and when i lift the glass and put i flashlight behind it i can see that the monitor works but the bulbs are not turning on. is there a way to apply separate power to the bulbs?
just like antdotwhat my monitor started doing the same thing as theirs on the same date. I turned...
(More)
just like antdotwhat my monitor started doing the same thing as theirs on the same date. I turned on my computer and the on light flashed on and of constantly this time with a black screen. I turned the computer off and back on and the monitor started working properly. This morning I turned it on and same thing. I tried turning the computer off and this time it would not work. I tried this several times. I think the monitor is no good anymore.
My Sceptre X9G Komodo II Replaced 2 caps 470uf that was bad by looking still no blicking light. Can...
(More)
My Sceptre X9G Komodo II Replaced 2 caps 470uf that was bad by looking still no blicking light. Can you help with any test point on the power supply board?
The information is displayed on the screen but it is not lit. If I put the monitor under the light I...
(More)
The information is displayed on the screen but it is not lit. If I put the monitor under the light I can see the screen. Is there a way of repairing this? I try adjusting the light but it doesn't work. pelm@copper.net
hey i found this monitor and when i plug it up o my pc the power light (blue) cuts on and it...
(More)
hey i found this monitor and when i plug it up o my pc the power light (blue) cuts on and it shows the desktop for about two seconds then it cuts off if i push the power button it comes back on then turns back off.
Hi there,
I am trying to open my monitor but it seems to be stuck near the top. I have taken the...
(More)
Hi there,
I am trying to open my monitor but it seems to be stuck near the top. I have taken the four screws out of the back, also the stand and now I still can't seem to get it off. I can pry open the bottom of the monitor alittle but it doesn't want to open the rest of the way. What am I missing. I don't see any more screws that attach to back of the monitor. The only ones I see are the ones that attach to the a/c plug which I don't believe affects it.