20 Most Recent
Questions & Answers
Pyxscape monitor wont work
I talked to the technition from the company and he had me try and do different things and then he told me that it would cost more to fix it,if it could be, than to go out and buy another monitor.
on Feb 01, 2009
Gateway FPD 1830 LCD Monitor
Your problem is the back lights are not being powered. There is a signal going to your FPD because the power light remains on, but the back lights are what helps support an image from the Front Panel Display.
The only way to fix this is to open it up.
If its got 3 boards inside((logic-->video, Inverter, Power)) The problem is the Inverter. Replace it.
If its got 2 boards inside ((Logic-->video, Power)) The problem is the power supply. The inverter is embedded onto it.
Simply replace the part with a known good one, and you got a spanking new monitor.
As for User Guest
Your issue is nearly the same issue when it turns off on you. But the doubling effect is from the power being supplied by an old or weary power outlet to an FPD. That can be the cause. Try different locations.
Well I wish you both luck and I hope this solution can help you with the problem.
on Nov 25, 2008
this is the fault of your lcd screen
it could be your screen jack is loose or damage white screen is coming due to back light is glowing only.it is better to take to some technician or service center.
on Jul 28, 2008
Not finding what you are looking for?