Magic Chef CER3740 Electric Kitchen Range

All Products > Magic Chef > Kitchen Ranges

Problems with Magic Chef CER3740 Electric Kitchen Range?

Troubleshooting and Support

Magic Chef, removal of cook top from range
My 1993,4 or 5 range needs the controller changed. How do I remove the cook top to get at the controller. I have access...

1 Solution

My oven won't work
My oven isn't working. The rangetop turns on fine, but the oven doesn't do anything no heat, and I don't think there's...

1 Solution

Oven will not turn off
When I was done using my oven the coils continued to burn, I had to uplug the stove, what could be the problem? Also is...

1 Solution

f3 fault code in oven mode--problem with...
where is sensor located--cannot find schematic diagram for sensor location

1 Solution

F7? What is it?
I had used my oven about two hours before using the stovetop. Later I had all four burners in use and on the...

1 Solution

Error Code F7 during Self-Cleaning
30 minutes after starting the self-clean cycle on my GE JGBP86WEA gas range, the F7 error code appears. From reading...

1 Solution

Frigidaire electric range
FEF179FCB model # Electric Range ES340 Replaced upper heating element in oven. Trying to reset the clock for the stove...

1 Solution

View All

Unsolved Support Problems

Post a New Problem

f-1 error code on range
I am getting a f-1 code on the range when you hit reset then it stays off for several hours but then will beep and...

Post a Solution

Oven beeping!!
Hi I am having problems with my Magic chef oven! It keeps beeping and flashing F1. PLEASE HELP ME!!!

Post a Solution

Stove top coil does not heat up.
One of four stove top coils (left rear coil) does not heat up. Replacing the coil with one of the other working coil...

Post a Solution

my oven turns off on me after only a...
I turn on my oven to any temperature and it heats up for a quick minute and then shuts off completely... what is the...

Post a Solution

Magic Chef TimeSavor Range error code F3
During a cleaning cycle we got an F2 error code on the oven. We let it cool and tried it again as the manual states. It...

Post a Solution