Magic Chef CER3760 Electric Kitchen Range - Answered Questions & Fixed issues

check temperature probe , if connection is good at connector then replace sensor

Magic Chef... | Answered on May 07, 2013 | 1,134 views

Sorry to read about your problem, I hope this helps you out.

if you do not see a start time, that model may not have start time

I tried to help you. Please help me and Rate/Vote on my response, thanks and good luck

Magic Chef... | Answered on Dec 24, 2010 | 64 views

Hi You will have to open the oven door and take the screws out of the side that faces inwards to the oven. Once the screws are removed the door will come apart. And then you can tighten the screws to secure the handle better. Also before you do that look under the handle and make sure there are not any set screws in it that tightens down to an anchor. They usually will be hex or allen screws .

Magic Chef... | Answered on Dec 16, 2010 | 627 views

Hi. this is referring to a Defective touch pad or clock (ERC). This will need to be corrected. Normally, you will need to, simply, replace the main control Board(ERC).

Follow this testing procedure to confirm the damage.

This simple test will help determine whether the ERC (Electronic Range Control or Clock) or the touch pad is defective when F1 error code is present.

Note: Some models incorporate the touch pad in to the ERC as a single assembly, in which case this test is not necessary. Simply replace the ERC (Clock).

Warning: If you feel in any way uncomfortable performing this test or making this repair, please contact a qualified appliance repair technician.

1. Disconnect power to the range (unplug the range power cord or turn the power off to the range at the circuit breaker). It is very important that the power to the range has been disconnected, so please double check before continuing.
2. Gain access inside the control panel.
3. Disconnect the touch pad (also called keypad or membrane switch) ribbon from the ERC.
4. Make sure there are no lose wires, or anything else that may cause a short when power is turned back on. Assemble the control panel back the way it was.
5. Turn the power back on.
6. Wait for at least one hour to see if the F1 code comes back (usually accompanied by a beeping sound).
7. If F1 comes back, replace the ERC. If it does not, replace the touch pad.

Magic Chef... | Answered on Nov 25, 2009 | 924 views

Function key shorted or stuck button Clean and un-stick button or replace Touch Pad or Clock

Magic Chef... | Answered on Apr 11, 2009 | 172 views

you have a basd erc or clock its the same thing by the way

Magic Chef... | Answered on Oct 30, 2008 | 165 views

you need a clock...sorry it will cost you

Magic Chef... | Answered on Oct 30, 2008 | 223 views

try manufacturer possible replacement number --appliance repair shop -online search

Magic Chef... | Answered on Jun 11, 2019 | 22 views

Google (Magic Chef)(68hk-6txw)(manual) without parens OR contact Magic Chef directly to request.

Magic Chef... | Answered on Apr 20, 2019 | 37 views

Sorry we do not have that kind of information, your local LP gas supplier can get what you need call them.

Magic Chef... | Answered on Jun 19, 2018 | 38 views

The spark electrode sends a spark to ignite the gas in the burner assembly. If the spark electrode is defective or worn out, it might not produce a spark, or the spark might be too weak to ignite the gas. As a result, the spark electrode will make a clicking sound when the burner is turned on, but the burner won't light. If the spark electrode is defective, replace it.

I’m happy to assist further over the phone at

Magic Chef... | Answered on Mar 25, 2018 | 37 views

Sounds like the ON Button has shorted out. If you have a VOM, run a continuity test.

Magic Chef... | Answered on Feb 18, 2018 | 39 views

Have u looked up the error codes online to find out what F3 is? Could be your thermal regulater, a cheap and really easy novice fix.

Magic Chef... | Answered on Jan 16, 2018 | 55 views

The oven probably has an igniter to light the pilot, and when not in use, shuts the gas off. Unplug the stove to replace the igniter. Enter your stove info and "how to replace oven igniter" on you tube for videos and detailed instructions.

Magic Chef... | Answered on Dec 15, 2017 | 239 views

Get an oven temperature thermometer and place in your oven. You can then check the temperature at all three settings.

Magic Chef... | Answered on Dec 04, 2017 | 64 views

Not finding what you are looking for?
Magic Chef CER3760 Electric Kitchen Range Logo

22 questions posted

Ask a Question

Usually answered in minutes!

Top Magic Chef Kitchen Ranges Experts

Paul Carew

Level 3 Expert

3421 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers


Level 3 Expert

85108 Answers

Are you a Magic Chef Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides