Top 20 Magic Chef CER3760 Electric Kitchen Range Questions & Answers


Hi You will have to open the oven door and take the screws out of the side that faces inwards to the oven. Once the screws are removed the door will come apart. And then you can tighten the screws to secure the handle better. Also before you do that look under the handle and make sure there are not any set screws in it that tightens down to an anchor. They usually will be hex or allen screws .

Magic Chef... | 627 views | 0 helpful votes


Sorry to read about your problem, I hope this helps you out.

if you do not see a start time, that model may not have start time

I tried to help you. Please help me and Rate/Vote on my response, thanks and good luck

Magic Chef... | 64 views | 0 helpful votes


Hi. this is referring to a Defective touch pad or clock (ERC). This will need to be corrected. Normally, you will need to, simply, replace the main control Board(ERC).

Follow this testing procedure to confirm the damage.

This simple test will help determine whether the ERC (Electronic Range Control or Clock) or the touch pad is defective when F1 error code is present.

Note: Some models incorporate the touch pad in to the ERC as a single assembly, in which case this test is not necessary. Simply replace the ERC (Clock).

Warning: If you feel in any way uncomfortable performing this test or making this repair, please contact a qualified appliance repair technician.

1. Disconnect power to the range (unplug the range power cord or turn the power off to the range at the circuit breaker). It is very important that the power to the range has been disconnected, so please double check before continuing.
2. Gain access inside the control panel.
3. Disconnect the touch pad (also called keypad or membrane switch) ribbon from the ERC.
4. Make sure there are no lose wires, or anything else that may cause a short when power is turned back on. Assemble the control panel back the way it was.
5. Turn the power back on.
6. Wait for at least one hour to see if the F1 code comes back (usually accompanied by a beeping sound).
7. If F1 comes back, replace the ERC. If it does not, replace the touch pad.

Magic Chef... | 924 views | 5 helpful votes


F7
Function key shorted or stuck button Clean and un-stick button or replace Touch Pad or Clock

Magic Chef... | 172 views | 3 helpful votes


check temperature probe , if connection is good at connector then replace sensor

Magic Chef... | 1,134 views | 1 helpful votes


you need a clock...sorry it will cost you

Magic Chef... | 223 views | 0 helpful votes


you have a basd erc or clock its the same thing by the way

Magic Chef... | 165 views | 0 helpful votes


try manufacturer possible replacement number --appliance repair shop -online search

Magic Chef... | 21 views | 0 helpful votes


Google (Magic Chef)(68hk-6txw)(manual) without parens OR contact Magic Chef directly to request.

Magic Chef... | 36 views | 0 helpful votes


Sorry we do not have that kind of information, your local LP gas supplier can get what you need call them.

Magic Chef... | 37 views | 0 helpful votes


The spark electrode sends a spark to ignite the gas in the burner assembly. If the spark electrode is defective or worn out, it might not produce a spark, or the spark might be too weak to ignite the gas. As a result, the spark electrode will make a clicking sound when the burner is turned on, but the burner won't light. If the spark electrode is defective, replace it.

I’m happy to assist further over the phone at https://www.6ya.com/expert/latoya_8ed1bf3dc615c15d

Magic Chef... | 37 views | 0 helpful votes


The oven probably has an igniter to light the pilot, and when not in use, shuts the gas off. Unplug the stove to replace the igniter. Enter your stove info and "how to replace oven igniter" on you tube for videos and detailed instructions.

Magic Chef... | 239 views | 0 helpful votes


Sounds like the ON Button has shorted out. If you have a VOM, run a continuity test.

Magic Chef... | 39 views | 0 helpful votes


Have u looked up the error codes online to find out what F3 is? Could be your thermal regulater, a cheap and really easy novice fix.

Magic Chef... | 55 views | 0 helpful votes


Get an oven temperature thermometer and place in your oven. You can then check the temperature at all three settings.

Magic Chef... | 64 views | 0 helpful votes


Yellow is sign of incomplete combustion. You need to give it more oxygen and yes, there is an adjustment for high altitude conditions. Your manual will advise.

Go to web site for manual if you cannot find it.

Magic Chef... | 118 views | 0 helpful votes

Not finding what you are looking for?
Magic Chef CER3760 Electric Kitchen Range Logo

22 questions posted

Ask a Question

Usually answered in minutes!

Top Magic Chef Kitchen Ranges Experts

Paul Carew

Level 3 Expert

3421 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Marvin
Marvin

Level 3 Expert

85108 Answers

Are you a Magic Chef Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Magic Chef Kitchen Ranges

  • Magic Chef Kitchen Ranges

Most Popular Question

magic chef elec oven f3 error code

  • Kitchen Ranges
Loading...