20 Most Recent Sony (crx300e) CD-RW/DVD-ROM (Combo) Burner Questions & Answers

try this one try to copy everything you want to burn through cd/dvd intothe computer then you can now burn it....



plz like if this is helpfull.....ty

you might have to physically unplug the leads for this cd/dvd drive restart your computer then plug them back in this should activate the found new hardware wizard or you might have to uninstall then reinstall your DVD/CD or uninstall the driver then reinstall for this device Click start control panel administrive tools,computer management,device manager scroll down cd-dvd rom drives you might see a yellow question mark ? right click you will have options to update driver,roll back driver,or select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall if this does not fix the problem it might be a registry problem if you cant see your disk drive in windows explorer Close all open programs

Click on Start, Run, and type regedit and press Enter Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak

If any of the above keys shown in step 4 are listed, right-click on them and choose Delete After deleting the keys, close the registry editor Reboot your computer Open My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone. hope this helps

make sure that the cdrw dvd rom is getting enough consistent power test all leads that are attached to the cd rom including electical extensions and make sure they have a secure connection or just replace them there might be bad/faulty or your drivers may have been corrupted or you might have a virus run your antivrus program you might have to physically unplug the leads for this cdrw dvd rom then plug them back in this will activate found new hardware wizard hope this helps or you might have to uninstall then restart your computer then reinstall your cd rom or uninstall the driver then reinstall for this device also click start control panel administrive tools computer management device manager scroll down cd dvd rom drives right click you can you will have options to update driver roll back driver select properties general troubleshoot select driver click to reinstall drivers click update driver uninstall then reinstall you need only do the registry check if you cant see the drive/s in windows explorer/my computer it might be a registry problem Close all open programs

Click on Start, Run, and type regedit and press Enter Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak

If any of the above keys shown in step 4 are listed, right-click on them and choose DeleteAfter deleting the keys, close the registry editorReboot your computerOpen My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone.hope this helps

Hi leigh_Hall86,

It seems that you're running a 32 bit version of the software on a 64 bit operating system. Or the driver is not longer supported by modern Operating systems. To fix this issue try finding and installing the right driver.

Hope this helped
-Luchen

This site shows the crx300e firmware driver for the sony product

http://www.burn4free.com/sony/sony-crx300e.htm

Your drive motor mount which releases the drive is defective, this is a known cause with most sony drives, unfortunately your only resource is to send in a ticket to SONY, register your drive, and send it in for repair or replacement, you can register your drive on their website and post the problem. You will be subject to this problem until the drive motor actually gives way, and possible lose a CD/DVD due to damage of the drum which spins the drive. One thing leads to another, send it in, get it repaired, or get a new drive if you can afford them, these cost $20.00-$40.00 online Amazon.com or buy.com or some sort of online store you can find in your area maybe an electronic store like a Radio Shack style. Best of luck, hope it helps.

hi

becoz you have a CD writer not a dvdRW it will burn only CD's not DVD's

both lence are diffrent

Hi there. You may need to re-install your drives.

Open Device Manager, click the + sign next to DVD/CD-ROM drives. Right-click on the drive and choose Uninstall Driver. Shut down your system, and restart. When Windows starts it will detect the new hardware and install the software for it.

Also, try uninstalling your burning software, restart, and re-install. It may be that the software has got corrupt.

Hope they work, and let me know if they do or don't.

Thank you

Tim

http://www.youtube.com/watch?v=-Xr71sWVacI

Hi,
do you have software/program that supports DVD.
Try a different DVD/Movie/Disk or alternative.
Also install a program, such as Nero which will give you physical characteristics of the drive.
Finally go to device manager, and remove or uninstall the device, reboot the computer and setup again. This can sometimes remedy the problem.
ensure that the drive is set as Master/Slave. if on the same Bus/IDE channel as a hard-drive. set as master/slave opposite to what the hard-drive is setup as.
Hope this helps.
Mike @ Compurepair.

I think your DVD burner is faulty and requires replacing, as they are very innexpensive to replace as you wili probably know,so don't waste too much time trying to solve it. It isnt the decoder as thats a peice software that comes in certain burning programmes, the laser is able to read cds as the tracks are wider apart than dvd's and are easier to read. The drives dont last as long as they used to because, keeping the price of burners down, like anything else means cutting corners and costs and in burners cases as was the case with PS2's the lasers are cheap and soon fail.

We can't helpwith that but you could contact your software supplier and ask for a copy.

Question edited for clarity, and toss in CAPS. Duplicate question deleted. Refresh page to see your question. Whatever you are trying to do with this Mr Chan, you are wasting your time. It is a Vintage computer running Windows 7. The manual is here

Sony VAIO PCG series Manuals

ManualsLib https://www.manualslib.com > ... > Laptop We have 1 Sony VAIO PCG series manual available for free PDF download: User Manual. Sony VAIO PCG series User Manual (202 pages). https://www.google.com/search?q=Sony+Vaio+PCG-9S1L+owner+manual ....

Question edited for clarity and made into written English. If you got 6 to 10 years use, you just buy a new one for $15.97. https://www.google.com/search?q=Sony+VRD-MC1+DVD+RW+Dual+Layer ..