Preparing your Newton deviceBefore you use the Newton Connection Utilities, you need to tell yourNewton device how it is connected to the computer.IMPORTANT Make sure you follow the setup instructions on your Newtondevice to enter your name and other owner information. The computer usesthis name when it creates a backup file. See your Newton device user’smanual to learn how to enter your name. Also, it’s a good idea to name thestorage cards you use with your Newton device.Selecting the type of connection on your Newton device1Tap Dock on your Newton screen.Note: If you have a MessagePad 120 or 130 that uses the Newton 2.0operating system, you use the Connection application in the Extras Drawer toselect a connection type and establish a connection. On your Newton screen,tap Extras E , then tap Connection. You may have to show all icons to see theConnection icon. (Tap the Extras folder tab and then tap All Icons.) Thenfollow the remaining steps in the procedures for selecting settings andestablishing a connection provided here.A slip appears showing the type of connection currently set for your Newton device. 2If necessary, tap “Connect via” to change the type of connection and choose Serial.8Chapter 1Tap to select anothertype of connection.Shows the type of connection set for your Newton device
Wiz