Franklin Machine Products Motor, Drive 208/240v, Savory

Problems & Solutions

• Kitchenaid Architect toaster - one of the bays not...

  If only one bay is not working it is more than likely the element has burnt out. Can you see a break in ...

  • sigv
  • 4/21/2013 1:32:01 PM
  • 50 Views

  1 Solution

• Slight smoking, smells like melted plastic or paint

  I would have said the new is smelling , but don't run the risk here, take it back and get another, unl...

  • Marie Honor
  • 1/18/2013 3:37:51 PM
  • 104 Views

  1 Solution

• my dualit toaster went dead

  You have not give which model of your toaster. However this is ususaly to the timer switch which usu...

  • Graham Howell-Morgan
  • 2/28/2012 6:59:46 PM
  • 645 Views

  1 Solution

• toaster left hand side toaster does not stay in the down...

  It sounds like to me that the spring lock mechanism is worn out, here is a site to check out that wil...

  • Jeffrey Abbott
  • 10/30/2011 12:33:36 PM
  • 1528 Views

  2 Solutions

• what kind of screw head is the star shaped one on tefal...

  The T10 Security Tork screwdriver is the size that fits the screws on my Tefal Toaster. Check when you...

  • peter_welsch
  • 4/3/2010 9:29:41 PM
  • 1100 Views

  2 Solutions

• My toaster only toasts one side

  Hello. Make sure you are not using the setting for bagels. If you do not have any special settings, the...

  • christine716
  • 4/23/2010 8:07:54 AM
  • 2110 Views

  1 Solution

• model 13767 lever wont stay down .Is there someone

  this solution is great - it worked, saving me a lot of money. rock-hard pieces can get stuck where you...

  • roger229
  • 2/20/2010 6:52:18 PM
  • 4326 Views

  3 Solutions

• I have a old wall built in thermador toaster & need parts

  I have the entire unit toaster with slide in wall mount. It appears to have been in use showing some sig...

  • 1jmcdon
  • 3/29/2009 9:11:05 PM
  • 519 Views

  4 Solutions

• toaster needs new heat coil

  Find a comparable model at flea shops, yard sales, or e-bay and take the parts off and install them on ...

  • mse0
  • 2/4/2010 2:16:18 PM
  • 636 Views

  1 Solution

• For some reason, the mechanism to hold down the

  When this happens it is usually due to the fact that the electronics inside the unit has failed, and wil...

  • anthropology
  • 1/22/2010 4:27:42 AM
  • 2552 Views

  2 Solutions

• duraband 4 slice toaster manual model # TS-5221

  if u need a manual for a toaster, then u r really in trouble...espcially for the amt of money u paid for...

  • Bob1182
  • 10/14/2007 6:10:58 AM
  • 616 Views

  3 Solutions

• my toaster only toasts on one side of the

  The kitchen aid brand is usually a good one, i prefer you too replace the toasting elements bec...

  • trisha_sisso
  • 12/29/2009 4:57:20 PM
  • 320 Views

  1 Solution

• Toaster won't stay down. Toastmaster Toaster

  The contacts on my magnetic lock (lever) had some crumbs and build up on it. I had to take it apart but...

  • rcamu
  • 9/21/2009 5:34:08 PM
  • 790 Views

  2 Solutions

• I am reassembling my sunbeam AT-W. Cannot figure

  If you mean a serpentine channel that serves as a strain relief for the cord, (with the appliance ups...

  • zapped49
  • 10/10/2009 1:56:16 AM
  • 71 Views

  2 Solutions

• center filaments won't heat

  buy a new one it will cost you more for an estimate and repairs

  • hardel4
  • 10/27/2009 9:52:11 AM
  • 93 Views

  1 Solution