The functioning of your Mac Book is a little different from Windows. It is possible that this may get you confused. Let's take a look at the steps for Canon Pixma MG2522 setup in Mac. Click on 'Drivers and software' options in your printer and chose the version of Mac OS you are currently using. Start downloading the printer driver on Mac. Then, double click the downloaded file to run it. Now, you have to select the 'Continue' button twice. Thereafter, press 'Install' to add the Canon Printer to your Mac Book.
https://connectmyprinter.com/how-to-setup-canon-pixma-mg2522/
The functioning of your Mac Book is a little different from Windows. It is possible that this may get you confused. Let's take a look at the steps for how to connect Canon Pixma MG2522 setup in Mac. Click on 'Drivers and software' options in your printer and chose the version of Mac OS you are currently using. Start downloading the printer driver on Mac. Then, double click the downloaded file to run it. Now, you have to select the 'Continue' button twice. Thereafter, press 'Install' to add the Canon Printer to your Mac Book.
https://connectmyprinter.com/how-to-setup-canon-pixma-mg2522/
you can make a factory clear , it erase all configuration made .
in control panel make the next secuence
press additional function
press 2
press 8
press additional function again .
service mode (#SSSW )will appear in the screen if doesn't repeat the procedure
with arrows < > Search for item CLEAR
press ok once
with arrows < > Search for item All
press ok once more
the copier will reset and restart, may take a few minutes . if don't restart by itself, turn off and then on from main switch
Even though the power is off, if the power cord is connected there is power going through the power supply.. What you are smelling is most likely the filter capacitors getting ready to fail
Error code E000733-0000 on Canon IR 2425 indicates that there is an issue with the toner waste container. Here are the steps you can take to resolve the error:
Turn off the printer and unplug it from the power source.
Open the front cover of the printer and remove the toner waste container.
Check the waste container for any blockages or obstructions. If you find any, clean them and reinsert the waste container.
Check if the waste container is full. If it is full, replace it with a new one.
Close the front cover of the printer and plug it back into the power source.
Turn on the printer and check if the error has been resolved.
If the error persists, you may need to contact a certified technician for further assistance as it could indicate a more serious hardware issue.
The error 22552 means that the computer has lost its connections with the printer so you have to check first if the connections are right before replacing any of the machines,you may have missed something in between