20 Most Recent
HP Officejet 6200 All-In-One InkJet Printer Questions & Answers
Two sided copies
that machine does not have an automatic duplexing capability
what you have to do to print both sides of the paper is in the print selection highlight print pages 1,3,5 etc and when finished turn the pages upside down and in backwards , the print pages 2,4,6,8
in the pages selection -print odd pages then when done print even numbers
I need to perform a factory reset.
Click on the link below and scroll down the page to near the bottom, and you will find instructions to do a "partial reset" , which returns the printer to factory defaults. If you click on the support link at the top of the page and select "support and troubleshooting" you can find a wealth of additional troubleshooting info.
Carriage Stall for HP Officejet 6200 Series
INK DOES NOT RELEASE WHEN PRINTING
Inkjet printers need to be used frequently to prevent ink drying out and blocking the print head nozzles. If the print head cleaning maintenance routine does not clear the blockages, then print head needs replacing, but it may be expensive. It may be more cost effective to buy a later model and better printer than replace the print head.
Scan
your software has some problem so you uninstall and reintall software again and try for scanning document
I can print, but I can't scan. Printer screen says
the drivers for the scanner might have been corrupted
you might have to uninstall the printer/scanner restart your computer then reinstall the printer/scanner and its drivers
click start control panel administrive tools computer management device manager scroll to ports(COM&LPT) + to expand you should see a communication port and Ecp printer port you might see a yellow?question mark this will mean you need to install a new driver for this device right click you will have options to update driver,disable,uninstall or select properties again you will have the similiar options plus you can troubleshoot
hope this helps
I Would like to have
u can take out the cartridge and clean the copper strip on the cartridge with a dry or little moist lint free cloth or tissue paper.
u can also go to settings on the printer screen and clean the cartridges from giving the command from there. mail me
[email protected]
Not finding what you are looking for?