20 Most Recent
HP Photosmart 8750 InkJet Printer Questions & Answers
I changed from windows
Let Photoshop do the colour management. Switch it of on your printer (only choose the right substrate). If your screen is calibrated, you can use your screen profile in your working space and choose a output profile and rendering intent when you print to a certain CMYK profile.
When we are using the
Hi,
Firstly, i will advice you get the exact prescribed cartridges to be used by this printer, the prescribed cartridges by HP, once you have gotten this, follow this procedure to reset it,
1. Without turning the unit off, unplug the power cord from the back of the product.
2. Press and hold # and 6 keys.
3. While holding those keys plug the power cord back in.
4. Wait until the screen goes blank before you release those keys.
5. Follow on printer screen instructions.This should fix the problem.
I keep getting a mechanism error, stating that the
Try cleaning the encoder strip with Sprayway Glass Cleaner, clean both sides till nothing comes off on paper towel. The encoder strip is the semi clear plastic strip that runs the width of the printer just behind the printhead cradle. You should be able to see through this strip but not like clear glass. This will also help with this printer if it is printing crooked images.
Blinking orange light
Hi,
Go to this link and download user guide and setup guide and reset your printer.
To reset your printer unplug the printer from computer and press Power button for 30-45 seconds and then restart your printer after 1-2 minutes for more details go through the manual:
Is there a sensor that tells the print head to
no sensor but what you need to do is to go into the properties of the printer in the printer icon in the control panel. In there will be a way to put the printer thru a realignment and once that is done the print should come out properly.
HP photosmart 8750 - cartridge cradle jamb error
You need to check the encoder strip, the clear plastic behind the carriage, ink or grease will stop it from reading and give that error. Also ink buildup on the clean station will slow it's travel.
Hp photosmart 8750 printer cradle stuck
Hold the power cord in your hand next to the wall outlet and open the service door.
When you here the clicking noise, that is the release for the tray arm.
Pull the power and try to move arm back and fourth. Close the service door and power unit.
Hope this works for you.
Carriage sticks
This problem have when the encoder strip on printer is dirty.Try clean it with piece of cotton.If this not help may you need to clean the purge unit or all printer.
Not finding what you are looking for?