http://www.fixya.com/support/p37811-miele_s548_bagged_canister_vacuumSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comThu, 10 Dec 2009 15:52:57 GMT80http://www.fixya.com/support/t3304926-not_vacuum_effectivelyDoes not vacuum effectively. It smells like it is burning. I have only had this one year and hardly use it. When I brought it to a local vacuum repair place, he wanted to sell me another one, and, of course, wanted to trade mine towards another.Thu, 10 Dec 2009 15:52:57 GMThttp://www.fixya.com/support/t3177984-miele_s546_vac_turnHave a miele S546 vac. and it won't turn on. Is there a fuse? Can the on/off switch burn out? Thanks.Thu, 10 Dec 2009 15:52:57 GMThttp://www.fixya.com/support/t2775408-canister_vacuum_keeps_turning_off_pushcanister vacuum keeps turning off, can push buttons on wand handle to restart but shuts off again as soon as you start to move handleThu, 10 Dec 2009 15:52:57 GMThttp://www.fixya.com/support/t2619831-catch_miele_revolution_come_offHi The catch on my miele revolution has come off completely of the accessory compartment; and I can not put back on; and don't know where to put back on! Bacically I am left with a black bit of plastic with a 2 hooks and a wire going across, and...Thu, 10 Dec 2009 15:52:57 GMThttp://www.fixya.com/support/t2505167-vacuuming_noticed_bag_neededI was vacuuming and noticed that the bag needed changing. the red light with the ! inside the triangle also came on. When the bag was changed, the vacuum would not restart. The red light came on. Tried the reset button but nothing happened. Tried...Thu, 10 Dec 2009 15:52:57 GMThttp://www.fixya.com/support/t901819-power_power_carpet_headI had trouble with this Miele vac starting, it would try to come on when the rewind would move; I took it apart found the electrical connections inside the rewind to be dirty and not making good contact because what seemed to be too much end play at...Thu, 10 Dec 2009 15:52:57 GMThttp://www.fixya.com/support/t902285-electrical_power_headThe rewind works fine, it's the power to the carpet head that is not working..Thu, 10 Dec 2009 15:52:57 GMThttp://www.fixya.com/support/t227489-windsor_sensor_12_vacuum_no_poweri know I have power down to the last quick disconnect in the housing base. I take off the cover today and I have circuit boards, capacitors, ect., ect. I have a digital meter. Is there anything I can check and how to check? As in circuit board, burnt...Thu, 10 Dec 2009 15:52:57 GMThttp://www.fixya.com/support/t235496-shampooing_carpetdon't know how to hook up carpet cleaning attachmentsThu, 10 Dec 2009 15:52:57 GMThttp://www.fixya.com/support/t236618-bissell_630_wI am having a problem with my new vacuum. I used it twice and I no longer have jun going into the pail. I cleared the lower suction tube and cleaned the filters and stillnothing going in. I have only had it for about a month and bought it t Wal-Mart....Thu, 10 Dec 2009 15:52:57 GMThttp://www.fixya.com/support/t232886-kenmore_canister_model_116_25512_startVacuum cleaner only runs when hose is inserted into Power Mate attachment, and only when switch (located on the hose unit) is set to "carpet." Does not turn on when set to "floors). When hose is not hooked up to the Power Mate, I can't turn the unit...Thu, 10 Dec 2009 15:52:57 GMThttp://www.fixya.com/support/t246371-kirby_g6_shampooerI need instructions as to how to put the shampooer together and if there is a way to make it compact enough to do stairs. ThanksThu, 10 Dec 2009 15:52:57 GMThttp://www.fixya.com/support/t247223-self_propelled_wind_tunnel_vacum_willWhy doesn't my self propelled vacum not move when handle is released,when both belts are intact and roller brush moves when turned on.?Thu, 10 Dec 2009 15:52:57 GMThttp://www.fixya.com/support/t251981-dirt_devil_vacuum_belthow do I change this belt?Thu, 10 Dec 2009 15:52:57 GMThttp://www.fixya.com/support/t254405-remove_vacuum_roller_offHow do you remove roller. Powerline Limited Editon Model #4352 ThanksThu, 10 Dec 2009 15:52:57 GMThttp://www.fixya.com/support/t260486-pullman_built_in_vacuum_cleaning_systemhaving problem with lose of suctionThu, 10 Dec 2009 15:52:57 GMThttp://www.fixya.com/support/t263819-power_consumption_refridgeratorsHi thereI am in the process of buying a generator for power losses (I live in a rural area) to ensure the Fridge and Freezer are kept running. I want to assertain the power (wattage) of my Refridgerators so I can ensure I buy an appropriately sized...Thu, 10 Dec 2009 15:52:57 GMThttp://www.fixya.com/support/t268160-windtunnel_beltTell me how to install pleaseThu, 10 Dec 2009 15:52:57 GMThttp://www.fixya.com/support/t282386-hoover_hush_series_central_vac_turnThe central vaccuum will not turn on from the wall (hose), it has to be be turned on at the canister.? All the electrical connections are correct and nothing seems to be loose.? I had this problem when I installed it and I can't remember what I had...Thu, 10 Dec 2009 15:52:57 GMThttp://www.fixya.com/support/t284672-cleaning_bissell_powersteam_cleanerThere is a clear plastic cover on the steam cleaner that attracts the carpet fuzz and when I finished cleaning the carpet I want to clean it out but can't figure out how to get to it.Thu, 10 Dec 2009 15:52:57 GMThttp://www.fixya.com/support/t286004-open_hoover_dm4526_change_beltMy Hoover vacuum DM4526 has a broken belt and I can't open it u enough to get the new belt on. Any ideas? Many thanks PenniThu, 10 Dec 2009 15:52:57 GMThttp://www.fixya.com/support/t287105-kirby_sentria_not_distributing_shampooOur new Sentria is not shampooing correctly. It is dumping the soap and water in the center only, not a full width distribution. I cleaned filters like the manual says once before and it worked. Not this time. Any ideas?Thu, 10 Dec 2009 15:52:57 GMThttp://www.fixya.com/support/t289883-nylon_washers_bissell_9200there are two 4"dia. washers on each side on the pivot point where the handle is attached to the base these washes have slots cut into them do these slots need to line up in any particular fashion when the handle assembly is reattached to the base?...Thu, 10 Dec 2009 15:52:57 GMThttp://www.fixya.com/support/t304313-vacuum_cleaner_repairLOUDER THAN USUAL MOTOR BAG EMPTY FILTER CLEAN CAN'T REMOVE TOP COVER TO CHECK MOTOR WORRIED THE MOTOR WILL BURN OUT SUCKING IS WEAKER THAN USUALThu, 10 Dec 2009 15:52:57 GMThttp://www.fixya.com/support/t305480-bad_motorI have purchased two of the Kenmore direct drive beltless systems with Progressive systems. The first died after a year, the vacuum motor start making a grinding noies. I pulled the side HEPA filter and could see a fine coating of graphite like dust....Thu, 10 Dec 2009 15:52:57 GMThttp://www.fixya.com/support/t305828-fantom_fm760power to motor goes on and off when the handle is moved up and downThu, 10 Dec 2009 15:52:57 GMThttp://www.fixya.com/support/t312011-eureka_4467av_upright_vacuum_userdo you have one you can email to me.. I am having trouble trying to figure out how or where to open my vacuum up from to feplace belt kuntripoolgal@yahoo.comThu, 10 Dec 2009 15:52:57 GMThttp://www.fixya.com/support/t322583-hoover_upright_windtunnel_isntit has suction, it just wont go foreward and its hard to push. i opened the bottom part and saw that the v shape belt was loose but i dont know if thats all i have to do. i cant find a manual online for u6470-900 hoover. should replacing that one...Thu, 10 Dec 2009 15:52:57 GMT