20 Most Recent Beko Wm & Wma Models Washing Machine Motor Carbon Brushes - Page 3 Questions & Answers

It might be hose trouble or alternatively (more common) is a blockage in the drawer or the drawer housing, this is especially more likely if you use detergent powder. The drawer should be removed and washed periodically and the inside of the housing examined to ensure it is clean and the outlets are clear. If you don't find a problem it will be necessary to take a look inside the machine at the hoses.

Hello sir please read my answer

as beko is Turkish made
You need first to cancel the spin program (or any program u wrongly started)

to do that
Power on washing machine
Wait until the spin program starts

Then press and hold your finger on start button for 4 seconds
You notice the middle led with "tub symbol " and right led " vertical line with a pointing arrow to it" are lit together (or if it have display u see the spin symbol flashing or the play flash flashing depending on your washing machine model)
wait for few seconds u notice it stops the pump and program cancelled.
Power off washing machine for 10 seconds then power on your unit is ready for desired program to select.
Note that u need to do the above steps to cancel the program u want to change.
Regards

unplug from wall check contacts at motor and pcb/ timer plug back in see if that works motor pulls a lot of juice look for a burnt contacts or connections. motor may be thermally fused .dont just bypass find the reason why thermal fuse failed

Lid switch is failing

thermal fuse failed?

May need to pay a professional for repair. https://www.repairaid.co.uk/beko-washing-machine-error-codes/

https://www.how-to-repair.com/help/faqs/beko-wmb81445-washing-machine-f13-error-code-0417/

I've had the same issue with a different dishwasher, and in my case two different possibilities had occurred. 1. Make sure the door is actually closed properly. 2. Make sure nothing is blocking the armature from spinning.

so get fixed

Does it have a drive belt? If so the belt may have broken.

https://manualsbrain.com/en/manuals/808139/?page=24 Hi! Please check the manual to this washing machine. Hope it will help!

https://www.repairaid.co.uk/beko-washing-machine-error-codes/

http://www.fixya.com/support/t27149805-beko_wmb_751441_la_starts_timer_etc

http://www.fixya.com/support/t26610295-clon_error_message_beko_washing_machine