20 Most Recent Neff B1421 Electric Single Oven - Page 7 Questions & Answers

0helpful
3answers

Neff b1421 single oven

I suspect that the thermostat has failed
10/22/2008 3:56:11 PM • Neff B1421... • Answered on Oct 22, 2008
0helpful
2answers

Self clean

I have a B1422 oven and it doesn't have a self cleaning option. It does, however, have a clean assist option.
If you have a box with what looks like a teardrop in it then your oven has the same system.

What you do is pour a mix of water and washing up liquid into the base of the oven moz-screenshot-1.jpgmoz-screenshot.jpgand switch the controller to the teardrop. The bottom element will then warm the liquid, and the resulting steam loosens the grime. You then use good old elbow grease to clean the oven.
8/12/2008 8:19:48 PM • Neff B1421... • Answered on Aug 12, 2008
0helpful
1answer

Heat Problem

Found this link on another website: http://www.ukwhitegoods.co.uk/modules.php?name=Forums&file=viewtopic&t=10044 I've sent off for the element. I'll let you know how I get on with fitting it.
3/26/2008 9:29:38 AM • Neff B1421... • Answered on Mar 26, 2008
0helpful
1answer

Change light-bulb

You need to remove the whole oven from its cabinet (after switching off the electricity supply). Removing the doors first; (see http://www.youtube.com/user/Apart4u for videos of this) then remove the facia, which allows you access to the two restraining hooks near the top of the sides of the oven. With these slackened off (screws at the front) and pushed back, the oven can be slid out of its housing - be careful, it's heavy - onto a similar height workbench in front of the oven housing. Removing the wiring hatch (2 screws) and the rear panel (6 screws) gives access to the screw in bulb. Hope this helps :)
1/3/2008 8:15:05 PM • Neff B1421... • Answered on Jan 03, 2008
0helpful
1answer

Oven doesn't reach temperature

Found this link on another site. I've placed an order for the element. Will let you know how I get on. http://www.ukwhitegoods.co.uk/modules.php?name=Forums&file=viewtopic&t=10044
10/30/2006 10:25:51 PM • Neff B1421... • Answered on Oct 30, 2006
0helpful
1answer

Neff U1422 oven grill tripping RCD

The grill element has an internal short and needs replacing. Sometimes you can see it as a slight bulging of the element. This happens just before it blows a hole. It may also have been physically damaged when something was put in there after a few Sherries. :>D Sounds like your RCD is adequately sensitive.
1/2/2024 7:05:55 PM • Neff Ovens • Answered on Jan 02, 2024
0helpful
1answer

Problems with touch keys on Neff B2ACH7HH0B Oven

See Troubleshooting section of manual on page 25. It may help untitled (neff-international.com)
11/8/2023 12:11:05 PM • Neff Ovens • Answered on Nov 08, 2023
0helpful
1answer

Removing Oven element on a NEFF 1031-SP oven ( E-Nr B1120F1GB/01)

Check out this video on replaceing a element on a Neff. https://www.youtube.com/watch?v=YXMBwx3X74E Best to you.
8/26/2023 10:39:57 AM • Neff Ovens • Answered on Aug 26, 2023
0helpful
1answer
0helpful
1answer

Neff Steam Oven error code E5123.

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwiwgLHn8vL-AhURAzQIHRE9BqIQFnoECBsQAQ&url=https%3A%2F%2Fwww.fixya.com%2Fsupport%2Ft29925510-neff_steam_over_error_code_e5123&usg=AOvVaw1yI-sjEM1vvRntCUJzF6u2
5/13/2023 6:13:47 PM • Neff Ovens • Answered on May 13, 2023
0helpful
1answer

Neff T18FD36X0/01 display flickering,not staying on.

If the display on your Neff T18FD36X0/01 appliance is flickering and not staying on, there could be a problem with the control board or the display module itself. Here are some steps you can take to troubleshoot the issue:
  1. Check the power supply: Make sure that the appliance is getting power by checking the outlet and the power cord. You can also try plugging in another appliance to see if the outlet is working properly.
  2. Check the control board: If the power supply is fine, the next step is to check the control board. Turn off the power to the appliance and remove the control panel cover to access the control board. Look for any loose wires, damaged connectors or burnt components. If you find any issues, you may need to replace the control board.
  3. Check the display module: If the control board is fine, the issue may be with the display module itself. Remove the control panel cover and locate the display module. Check the connections and make sure they are secure. If the connections are fine, the display module may need to be replaced.
  4. Call a professional: If you are not comfortable troubleshooting or repairing the appliance yourself, it is best to call a professional technician. They will be able to diagnose the issue and recommend the best course of action.
Remember to always turn off the power to the appliance before attempting any repairs or troubleshooting. Safety should be your top priority.
2/26/2023 2:10:59 PM • Neff Ovens • Answered on Feb 26, 2023
0helpful
1answer

I can't remove the light bulb cover of my neff oven to change the bulb

A length of wood such as a dowel can be used with a mallet or small hammer. Place one end of the wood against the lamp cover so as to force it anti clockwise. Tap the other end gently.
1/21/2023 1:09:13 PM • Neff Ovens • Answered on Jan 21, 2023
0helpful
1answer
0helpful
1answer

My neff ovens fan is coming on but the oven is overheating

Check/replace the thermostat.
2/28/2022 12:54:15 PM • Neff Ovens • Answered on Feb 28, 2022
0helpful
1answer

Cause of Neff Induction Hob Error d4?

I can only confirm that the is no D4 Error shown anywhere. If Neff, the maker can't tell you what the error is, then surely no-one can. Very poor show. I think I would be cutting my losses and go back to a traditional cooktop from a different maker and pursue a legal case against Neff. They should change their name to 'Naff'. NEFF appliances are among the most durable and reliable kitchen devices on the UK market. But every once in a while, a NEFF appliance will throw an error code for you to deal with. When a fault code is displayed on your NEFF appliance, it indicates a problem, but not what that problem is or what has caused it. An appliance fault code simply detects and indicates the nature of the issue and provides the general area where investigations need to be carried out. Bear in mind that on many occasions, your NEFF appliance will be in need of professional repair from a certified electrician to get guaranteed results. So, if :
  • You have a problem with your NEFF appliance
  • You want to know what a specific error code means
  • You want to trace and correct faults in your NEFF appliance
Then, read on. NEFF appliances fault codes and their importance Your NEFF appliance will indicate an error code if it has a problem. This will be shown on the digital display and will be a single letter followed by one or two numbers. You can use this appliance error code to help identify where the problem is occurring. The most common appliance fault codes are related to defective oven elements, drainage issues on washing machines, and blocked pumps in dishwashers. A detailed look at NEFF appliance error codes

NEFF induction hob error codes The most common faults of a NEFF induction hob are:
  • The hob not starting up;
  • The hob shutting off during cooking;
  • The hob flashing after finishing cooking;
  • The hob making a noise;
  • Food isn't cooking evenly.
NEFF induction hob error codes that may help you locate the source of the problem are shown here:
  • F1 - Tnsuitable cookware is being used, or there's no cookware in the zone;
  • F2/F02/F4/F04- Tour appliance hasn't cooled down completely;
  • F8/F08 - If your hob has been working on high power for a long time, the timeout will activate;
  • E9 - There's an internal fault with your appliance electronics.
Bear in mind that most of the issues will require a certifed induction hob engineer to complete the job and fix your NEFF appliance.
2/3/2022 5:01:09 PM • Neff Ovens • Answered on Feb 03, 2022
0helpful
1answer

Neff B1820W0GB/03 oven door disassembly

The inner door glass is usually lifted out by removing the two plastic/metal clips at the top of the glass, in the corners. The glass cannot be glued in. How are you going to clean it if you do ...
1/27/2022 7:24:41 AM • Neff Ovens • Answered on Jan 27, 2022
Not finding what you are looking for?
Neff B1421 Electric Single Oven Logo

161 questions posted

Ask a Question

Usually answered in minutes!

Top Neff Ovens Experts

Paul Carew

Level 3 Expert

3808 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

john h

Level 3 Expert

29494 Answers

Are you a Neff Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Neff Ovens

  • Neff Ovens

Most Popular Question

neff oven error 5 turn off

  • Ovens
Loading...