Hi we have an extened warranty on out Sharp 16661 all in one. We moved office's and now we can get...
(More)
Hi we have an extened warranty on out Sharp 16661 all in one. We moved office's and now we can get the scanner or fax to work. The photo copier and the printer works
I have reviewed a previous solution you gave regarding reseting the drum counter on my printer. Your...
(More)
I have reviewed a previous solution you gave regarding reseting the drum counter on my printer. Your procedure was: Press c interrupt c interrupt within 15sec display goes off enter 24 press start button enter 7 press start button 000 blinks press ca to exit from the program or restart the machine. I cannot make this work, please help me understand the interrupt? Is that a space of time, a button on the machine, etc. I appreciate any advise on this matter.
I have replaced the drum but do not know how to reset the counter
I don't understand the interrupt,...
(More)
I have replaced the drum but do not know how to reset the counter
I don't understand the interrupt, I can't make the procedure work? Please help.
I have a Sharp AL-1661CS that is a copier, fax, print, and scanner machine. I can fax out ok with...
(More)
I have a Sharp AL-1661CS that is a copier, fax, print, and scanner machine. I can fax out ok with this machine, but I can not get a fax to come in to my office. The phone will ring, but the line status line will not come on nor will the fax come in. Please help!!! I have all the settings set according to the manual.
I recently changed the drum unit with a Sharp replacement drum and also installed a new catridge...
(More)
I recently changed the drum unit with a Sharp replacement drum and also installed a new catridge unit but now when printing the documents come out light gray.
I am getting an error and a blinking triangle. The error is "System Error [H3-00] Refer to User...
(More)
I am getting an error and a blinking triangle. The error is "System Error [H3-00] Refer to User Guide". The User Guide instructs to switch off he machine and wait 10 seconds before switching on again which I have done but to no avail. Do you have any suggestions. Coral