20 Most Recent Roper RAX4232KQ Top Load Washer Questions & Answers


When tested they cannot get all of the water out. When new the plastics tend to smell a little and it should wear off after a few washes.

Roper RAX4232KQ... | Answered on Jul 03, 2017


Joseph,
I would suggest one place to start is your lid switch. If it is not working properly, the washer may think that the lid is still up and it will not advance until the switch is made. With the lid up, take a small screwdriver or other small stiff object and stick it through where the pin on your lid would go through and see if you here a clicking sound. If you do not hear a clicking sound, your switch is probably bad and needs to be repaired or replaced. Hope this helps!

Roper RAX4232KQ... | Answered on Jul 08, 2015


Can you advance the timer manually to the wash cycle? If so? Does the washer start agitating? If it does? your timer motor has failed. You may find the motor only at a used appliance store, other wise replace the timer. Try advancing it before you do anything.

Roper RAX4232KQ... | Answered on May 05, 2013

Not finding what you are looking for?
Roper RAX4232KQ Top Load Washer Logo

143 questions posted

Ask a Question

Usually answered in minutes!

Top Roper Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85161 Answers

Mike

Level 3 Expert

4359 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Are you a Roper Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Roper Washing Machines

  • Roper Washing Machines

Most Popular Question

roper rax4232kqo washers but

  • Washing Machines
Loading...