http://www.fixya.com/support/p37057-roper_res7648e_dryerSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comMon, 21 Dec 2009 18:00:30 GMT80http://www.fixya.com/support/t2794695-roper_rex6634pq0_start_buzzes_gets_hotRoper dryer model rex6634pq0 won't start. Push the start button and it just buzzes. When it first went out, the metal surface was so hot we had to turn it off.Mon, 21 Dec 2009 18:00:30 GMThttp://www.fixya.com/support/t3590427-takes_2_cycles_high_dry_cloths_hookedtakes 2 cycles on high to dry cloths. i hooked osiloscope up to it and it will draw 22.5 amps for about 25 seconds and bounce between 2 and 7 amps for about 90 seconds and keep repeating this way (on high setting) Roper RES7648EQ2 dryerMon, 21 Dec 2009 18:00:30 GMThttp://www.fixya.com/support/t3091847-remove_motorcant remove the motorMon, 21 Dec 2009 18:00:30 GMThttp://www.fixya.com/support/t2741647-lint_screen_no_lint_after_dryingmy lint screen has no lint on it after drying a load. it also takes more than 1 cycle to dry. I have checked venting and it is clear. Heating element seems to be working, gets hot and goes off, comes back on. Not sure what else to do? Any...Mon, 21 Dec 2009 18:00:30 GMThttp://www.fixya.com/support/t2340793-dryer_will_not_startWhen I push the start button my dryer does not turn on. I here it click but nothing. i checked the door switch and i can here the timer workingMon, 21 Dec 2009 18:00:30 GMThttp://www.fixya.com/support/t430631-runs_fine_just_no_heatMy roper RES7648EQ2 runs fine just will not heat up. Not sure were to begin? any help or advice would be greatly appreciated. Thank you. roseMon, 21 Dec 2009 18:00:30 GMThttp://www.fixya.com/support/t1269190-removing_blower_fan_from_motor_kenmoreI have removed the covers and have a new replacement motor. There is no clip on the blower. It seems to be pressed or threaded on. There is a 1/2" square hole in the blower face. I used a 1/2" socket drive and tried both CClockwise and Clockwise...Mon, 21 Dec 2009 18:00:30 GMThttp://www.fixya.com/support/t1232832-remove_blower_fan_from_motor_shaftthe dryer won't work at all checked the thermal fuse that was good want to have the motor checked but can't get it removed from the blower fan is it just pressed onMon, 21 Dec 2009 18:00:30 GMThttp://www.fixya.com/support/t149049-begin_suspect_back_start_switchWas working earlier, put another load in and pooped out. Reset the breaker from fuse box. Getting power. I can set the cycle select to time dry and hear the time click. Light inside works, appears the short is in the start putton. How can I...Mon, 21 Dec 2009 18:00:30 GMThttp://www.fixya.com/support/t204687-kenmore_electric_dryer_will_not_runRecently my Kenmore has stopped running. I have checked the door switch and Start Switch which both work fine. In fact I can hold the Start switch down and it runs just fine and heats. Where would I look next to troubleshoot?Mon, 21 Dec 2009 18:00:30 GMThttp://www.fixya.com/support/t209551-tumble_dryerhow to change belt tl14pMon, 21 Dec 2009 18:00:30 GMThttp://www.fixya.com/support/t211699-washing_machine_temperatureswhat temperatures are used by the settings on USA washing machines described as cold,warm and hot. The launderette i use in the UK uses USA machines, but the UK instructions on my clothes give temperatures.Mon, 21 Dec 2009 18:00:30 GMThttp://www.fixya.com/support/t216043-question_about_whirlpool_dryer_ventingI've bought a new house and the dryer venting is already installed. However, upon inspection I've found there are 6 elbows between dryer hook up and vent outside and it starts at 4" and goes down to 3". This doesn't seem quite right. My questions;...Mon, 21 Dec 2009 18:00:30 GMThttp://www.fixya.com/support/t221223-westinghouse_dryerMy dryer makes alot of noise i can move the tub up and down? not alot but about 1/2 inch to inch? what is my problem?? thanksMon, 21 Dec 2009 18:00:30 GMThttp://www.fixya.com/support/t222471-dryer_not_heat_upI have a ADMIRAL 20 pound Capacity heavy duty with Model # LDGA400AAW, SERIAL#KH18442. When I put a load in turn it on the tub spins. But does not heat up. Took the top and front of the housein off. Took tub out to see if any thing looked brokin. I...Mon, 21 Dec 2009 18:00:30 GMThttp://www.fixya.com/support/t222507-whirlpool_dryerThe dryer starts, gas valve opens and it has heat, after a few minutesthe valve must be closing because it loses flame. It will cycle likethis in automatic or manual time set.Mon, 21 Dec 2009 18:00:30 GMThttp://www.fixya.com/support/t227607-hooking_electrical_dryer_breakerHow do I wire an electric dryer to a breaker box? We had a gas dryer and now have an electric one and need to wire for it. ThanksMon, 21 Dec 2009 18:00:30 GMThttp://www.fixya.com/support/t231483-electric_dryer_coil_overheating_afterI recently dried a few pairs of shoes and near the end of the dry cycle, my dryer started to make a horrible scraping sound. I opened up the dryer to find that the heating coil had been severed and was pulled in such a way that the drum was scraping...Mon, 21 Dec 2009 18:00:30 GMThttp://www.fixya.com/support/t233083-electric_dryer_problemMy Maytag electric dryer starts and heats, but will not shut off. Timer dial does not move. Is my timer bad?Mon, 21 Dec 2009 18:00:30 GMThttp://www.fixya.com/support/t235107-clothes_dryer_troubleshootingI have a GE electric clothes dryer that just stopped working. It's getting power because when I put the dryer setting on "Timed Fluff ( No Heat), I can hear the timer ticking. Before it went out, there was a loud sweaking like the roller wheels...Mon, 21 Dec 2009 18:00:30 GMThttp://www.fixya.com/support/t237459-heating_element_stays_after_door_openedIF there is time left on the timer and the door is opened and the dryer tumbler stops. The heating element stays on and never turns off . Only if the dryer timer is at zero (off position)Mon, 21 Dec 2009 18:00:30 GMThttp://www.fixya.com/support/t239019-dryer_want_turnneed help with dryer, it want turn on (whirlpool)Mon, 21 Dec 2009 18:00:30 GMThttp://www.fixya.com/support/t245427-help_general_electric_dryer_blowingI BOUGHT A USED GENERAL ELECTRIC GAS DRYER MODEL # DCLR333ETOWWSERIAL # LS226872Gand it still runs pretty good except for the cold air. I really don't know if itis cheaper to get a new one or fix the old one. I really don't have a lotof money and I...Mon, 21 Dec 2009 18:00:30 GMThttp://www.fixya.com/support/t250199-connection_new_circuit_board_creda_tumbeI have purchased a new cicuit board as the other one burnt out due to lying on the drum whilst operating. I have now purchased a new circuit board. Can you please send me a picture or confirm which 3 wires attach to which 3 places on the circuit...Mon, 21 Dec 2009 18:00:30 GMThttp://www.fixya.com/support/t253471-maytag_gas_dryer_ldg7304aae_heatHello, I have a Maytag Gas Dryer, model LDG7304AAE. I have checked the obvious things, like the dry setting. The dryer motor runs, but I am getting no heat. The ignitor never fires. I do not believe the problem is with the ignitor because I'm getting...Mon, 21 Dec 2009 18:00:30 GMThttp://www.fixya.com/support/t253731-ge_electric_dyer_cordWe have a three prong electrical cord and our new house is 4 prong outlet. What can we do?Mon, 21 Dec 2009 18:00:30 GMThttp://www.fixya.com/support/t257103-ge_dryer_starts_but_stopsdryer starts when start switch is engaged but stops immediately on release of switch - I.E. must hold switch on for dryer to operateMon, 21 Dec 2009 18:00:30 GMThttp://www.fixya.com/support/t262447-kenmore_27_inch_wide_electric_dryerWhat tests can be performed to diagnos a non start condition? With the "Soft Heat System" selector pointed anywhere in the "More Dry" position we can hear a ticking sound, but whenever the Start button is pushed we can also hear a buzzing or humming...Mon, 21 Dec 2009 18:00:30 GMThttp://www.fixya.com/support/t265371-gas_dryerI just installed a Kenmore dryer that is about 15 years old. My problem is the heat only stays on for about 20 seconds then after 2 minutes it comes back on for 20 seconds and so on. What could my problem be?Mon, 21 Dec 2009 18:00:30 GMThttp://www.fixya.com/support/t265583-parts_old_inglis_dryerLooking for parts for 2 old dryer inglis model JO94580DR 1 and Lo89080 door switch for bothMon, 21 Dec 2009 18:00:30 GMT