http://www.fixya.com/support/p36844-tricity_bendix_aw1000w_front_load_washerSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comTue, 22 Dec 2009 14:43:52 GMT80http://www.fixya.com/support/t3676697-drum_runs_rough_spin_plastic_shavingsDrum runs very rough on spin. Plastic shavings in the heater well. At first thought there could be something trapped inside but now suspect the drum bearing. Is this common and is there a way to replace bearings without dismantling the drum casing?Tue, 22 Dec 2009 14:43:53 GMThttp://www.fixya.com/support/t3637756-water_wont_drainwater wont drainTue, 22 Dec 2009 14:43:53 GMThttp://www.fixya.com/support/t3526848-door_open_bendix_biw1000_wdoor won't open bendix BIW1000 WTue, 22 Dec 2009 14:43:53 GMThttp://www.fixya.com/support/t3516760-tricity_bendix_aw1000w_drum_will_notI have a Tricity Bendix AW1000W. The drum will not rotate. The belt is fine, the brushes on the motor seem ok, the machine fills with water ok and the pump drains it ok but there is no drum wash rotation or spinTue, 22 Dec 2009 14:43:53 GMThttp://www.fixya.com/support/t3435530-unscrewed_oven_door_clean_inI have unscrewed my oven door to clean the in between of the glass. After I screw it back, the glass seems not tightly attached like before. whyTue, 22 Dec 2009 14:43:53 GMThttp://www.fixya.com/support/t3320981-tricity_bendix_aw1001w_door_locki need to know the wiring for a tricity bendix aw1001w door lock mechanism. original lock has been removed and so i'm left with 3 wires and 3 terminals...helpTue, 22 Dec 2009 14:43:53 GMThttp://www.fixya.com/support/t3197797-washing_machine_not_spinning_aw1000wwashing machine not spinning AW1000W. It is about 6 years old. It appears to be responding to the control knob. It makes some slight clicking noises like a relay opening/closing It can be turned by hand without resistance. Draining is working...Tue, 22 Dec 2009 14:43:53 GMThttp://www.fixya.com/support/t3220852-remove_cover_expose_belthow do remove the cover to expose the belt on tricity bendix aw1100s it seems sealed no back pannelTue, 22 Dec 2009 14:43:53 GMThttp://www.fixya.com/support/t3200645-not_know_part_number_door_handledo not know part number for door handleTue, 22 Dec 2009 14:43:53 GMThttp://www.fixya.com/support/t3152384-tb_1000w_not_drain_amp_pump_seemsMy TB 1000w does not drain & the pump seems to be workingTue, 22 Dec 2009 14:43:53 GMThttp://www.fixya.com/support/t3080313-washing_machine_trips_electricity_as_itsi have a tricity bendix washing maching aw1001, its just over a year old. during the wash cycle small sparks seem to light up from underneath, a burning smell seems to come from it then when its about to spin it trips my electricity. what could be...Tue, 22 Dec 2009 14:43:53 GMThttp://www.fixya.com/support/t2994376-washing_machine_goes_programme_untillwashing machine goes through the programme untill it needs to drain. It makes humming noise but does not drain water out so then it wont spinTue, 22 Dec 2009 14:43:53 GMThttp://www.fixya.com/support/t2652151-dyson_hoover_not_picking_up_wheels_okDyson upright hoover wheels dont seem to be turning, and it is picking up fine with the hose but not from bottom. Making a bit of a noise.Tue, 22 Dec 2009 14:43:53 GMThttp://www.fixya.com/support/t2595174-bendix_800_autowasher_de_luxe_drum_spinFound two pieces of broken off vessel on the floor under the washing machine? - blue glazed ceramic inner surface with pitch coloured outer surface. What is this from and is it serious, presumeably it wont run well in this condition. The machine...Tue, 22 Dec 2009 14:43:53 GMThttp://www.fixya.com/support/t2433346-tricity_bendix_just_filling_up_triclemy washing is now taking three hours to do,the water is running in very slow,hardly dispencing the powder in.yesterday was left with a clump of powder,had to use a cup to disolve the powder in to machine.Tue, 22 Dec 2009 14:43:53 GMThttp://www.fixya.com/support/t136163-tricity_bendix_washer_fabric_softner_inMy Tricity Bendix Washer 1000 stopped taking the fabric softner in the rinse cycle. I have taken the drawer out, cleaned it out and still nothing. I cannot see any blockage.Tue, 22 Dec 2009 14:43:53 GMThttp://www.fixya.com/support/t210297-problem_machinei set the wash programethen press the start button and nothing happens. There is nothing wrong with the water inlet or the electric.Tue, 22 Dec 2009 14:43:53 GMThttp://www.fixya.com/support/t1505409-motorhome_brakes_spartan_chassis_haldexneed Bendix master cylinder replacement or partsTue, 22 Dec 2009 14:43:53 GMThttp://www.fixya.com/support/t1794691-machine_not_drainingI turned on machine but it did not drain at end of cycle. Now no cycles work. It just hums on all settings but nothing happens.Tue, 22 Dec 2009 14:43:53 GMThttp://www.fixya.com/support/t1710155-manual_tricity_bendix_1000Can you tell me where to print off the instructions for tricity bendix 1000. I only need a couple of the pages. Many thanksTue, 22 Dec 2009 14:43:53 GMThttp://www.fixya.com/support/t1695084-tricity_bendix_eco_machine_buti have tricity bendix eco machine but there is alway an unpleasant smell from machine and when i drain out the water at filter it is very stale smelling. any one else this problemTue, 22 Dec 2009 14:43:53 GMThttp://www.fixya.com/support/t1599674-manual_spinWhen I put the Machine dial to spin the clothes, at the end of the cycle they are coming out wet. When I do this manually the programs are not functioning correctly when set for another wash.Tue, 22 Dec 2009 14:43:53 GMThttp://www.fixya.com/support/t1582028-problems_after_getting_fluff_in_machineI have a Tricity Bendix 'Advanced Eco Shower System' 1400 rpm washing machine. I stupidly washed a large fluffy cloth in it, not realising that it would shed loads of fibres. Next time I used the machine, they got stuck all over the clothes, but...Tue, 22 Dec 2009 14:43:53 GMThttp://www.fixya.com/support/t1514814-bendix_71478Door release not working to release doorTue, 22 Dec 2009 14:43:53 GMThttp://www.fixya.com/support/t1531561-tricity_bedix_spin_querytricity bendix aw 1053 w washing is still wet after cycle 4 i put it back on spin and it does the job can you help resolve this thanksTue, 22 Dec 2009 14:43:53 GMThttp://www.fixya.com/support/t1504148-tricity_bendix_aw1000w_inlet_hoseHad my machine fitted and its been leaking a very small amount gradually. The inlet hose that attaches to the machine is wet round the outside. I took it off and there is no washer in it. Do you know if there should be one to seal it because it...Tue, 22 Dec 2009 14:43:53 GMThttp://www.fixya.com/support/t1482827-servis_washing_machine_turnsmy servis washing machine turns and empties but wont spin machine isnt spinningTue, 22 Dec 2009 14:43:53 GMThttp://www.fixya.com/support/t1485047-tm545_drierwhere do wires go when changing elemantTue, 22 Dec 2009 14:43:53 GMThttp://www.fixya.com/support/t1109144-fabric_conditioneri have bought a second hand tricity bendix 1000 washer/dryer does anyone know where to put the fabric conditioner pleaseTue, 22 Dec 2009 14:43:53 GMThttp://www.fixya.com/support/t1359127-washing_machinewhen machine gose to sin itself out water will come back up trough the powder dispenser drawer. and the machine vibrates and there is a serious noise like a moped comming from machine when it attempts to spin and when it starts to spin the drum will...Tue, 22 Dec 2009 14:43:53 GMT