20 Most Recent Zanussi ZWF1440 Front Load Washer - Page 6 Questions & Answers


If the washer won't drain there might be a clogged pump or hose. It's common for small socks or other small clothing items to get into the water drain system and clog the hose leading to the pump or the pump itself. Remove the hoses from the pump in order to remove the article of clothing.

Zanussi Washing... | Answered on Jun 29, 2019


E20 means problem with drain water phase
Only two things need to be checked:

- Drain pump could be clogged or no power supply (the last means
faulty drain pump, faulty electronic or wiring between drain pump
and electronic.
- Your home drainage system (in the wall) is clogged (This is very
easy to check visually, disconnect the drain hose from your
siphon and put water in some container or in washbasin.)

Dado

Zanussi Washing... | Answered on Jun 15, 2019


Don't know model# try utbe
image-km53jp5dlkz0ffzm4tt5u4mo-5-20.jpg

image-km53jp5dlkz0ffzm4tt5u4mo-5-27.jpg

Zanussi Washing... | Answered on Mar 02, 2019


Page 9 of this manual, if this is the same model, may help turn off acoustic signals. It shows an image of a P and another image of a button to turn off.

https://manuall.co.uk/zanussi-zwf-91483-wr-lindo-300-washing-machine/

Zanussi Washing... | Answered on Feb 23, 2019


WE COULD NEVER TELL YOU IF IT IS WORTH FIXING . ONLY YOU KNOW HOW OLD IT IS AND IF YOU WANT TO WASTE MONEY FIXING OLD THINGS

Zanussi Washing... | Answered on Feb 16, 2019


This can be due to error in the control board. Shut down and remove plug and when switched on press down the start/stop button. If the error does not clear this can be a fault in the motor drive within the control panel board.
Remove the panel and check the connections to the motor, check the motor and the capacitor to the motor or if the motor is jammed.

Zanussi Washing... | Answered on Feb 03, 2019


NTC2 Sensor fault.

Either the sensor is bad or...

Wiring to the sensor or...

Faulty electronic board

Zanussi Washing... | Answered on Feb 02, 2019


i50 - on your dishwasher means "Motor triac short-circuited"
(the washing pump runs uncontrolled at maximum speed)

Remedy: it is mostly circuit board faulty

Dado

Zanussi Washing... | Answered on Jan 12, 2019


DEPENDS ON WHAT BURNT UP MIGHT BE MORE THAN 1 THING CALL A LOCAL REPAIR SHOP AND HAVE THEM CHECK IT OUT

Zanussi Washing... | Answered on Jan 04, 2019


Ed4 - means:
Relay that switches the power between the washing and drying heating element (in the WD PCB).
Could be:
Wiring faulty; Electrical current leak between heating element and
ground; WD board faulty; Main PCB faulty
When this malfunction occurs the cycle stops with door open.

Dado

Zanussi Washing... | Answered on Dec 30, 2018


Got a zanuzzoe Electrolux. Aqua cycle filter button is orange won't reset

Zanussi Washing... | Answered on Dec 08, 2018

Not finding what you are looking for?
Zanussi ZWF1440 Front Load Washer Logo

144 questions posted

Ask a Question

Usually answered in minutes!

Top Zanussi Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

jimorris77

Level 3 Expert

411 Answers

Marvin
Marvin

Level 3 Expert

85108 Answers

Are you a Zanussi Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Zanussi Washing Machines

  • Zanussi Washing Machines

Most Popular Question

aeg lavamat shows

  • Washing Machines
Loading...