my zanussi washing machine zwf 1221s jumps out from the wall when trying to spin. pump working belt...
(More)
my zanussi washing machine zwf 1221s jumps out from the wall when trying to spin. pump working belt on. when trying to spin water some times comes out of washing powder tray machine will stop go in to reverse spin making a grinding noise the stop
after the past few washes when i have taken the load out i have noticied dirty marks on them. these...
(More)
after the past few washes when i have taken the load out i have noticied dirty marks on them. these are brown faint lines that do wash out. the washing machine doesn't sound any different help!!!
we have just changed the ecu or main printed circuit board as u may call it! board on our zannussi...
(More)
we have just changed the ecu or main printed circuit board as u may call it! board on our zannussi fle 1416w as the washer stoped working and a cliking noise came from it so we took the old one out and found that were one of the plugs went was black as if blown we have just payed £90 for a new one and put it back to the washing machine plugged all the plugs back in the right places and wen we plugged the washing machine bk in the ecu board sparked and wen switched the washing machine then on with the on/off switch nothing came on aprt from the light on the on/off switch and the door light the cycle lights dint come on and the machine made a bleeping noise please can u help me wat did i do wrong or is something else making the the ecu board blow???
My GE Front-Load Washing machine (no model name, newer one might be called Adora) is about 6 years...
(More)
My GE Front-Load Washing machine (no model name, newer one might be called Adora) is about 6 years old and recently it has started pausing itself midway through various cycles. The "pause" light is flashing, as though I pressed it, and it restarts when I press the button to unpause it. Very annoying because you expect the load is finished and discover it paused itself shortly after it started. Happens 1-3 x per wash cycle. I don't know if this is related, but I had no problems until about a month ago when I started a load and then all the lights flashed on the machine, door locked and then everything went dead. A few minutes later I was able to power on the machine and it seemed to work fine. It was not a power failure. Any advice would be much appreciated as I can't really afford a service call right now! Thank you.
Hi, I have a fault with the above mahine: when switched on the drainpump runs for about 10 seconds...
(More)
Hi, I have a fault with the above mahine: when switched on the drainpump runs for about 10 seconds and then it stops with the start/pause button flashing. It does this on every program and doesn't show an error code. Thanks in advance.
hi we have receintly got this model but no instructions ,(a) where can we get instructions from (b)...
(More)
hi we have receintly got this model but no instructions ,(a) where can we get instructions from (b) the machine is not taking the fabric conditioner during the wash cycle . Please help
when i put the washing machine on a cycle half way thorught the cycle the lights will go out, and...
(More)
when i put the washing machine on a cycle half way thorught the cycle the lights will go out, and the wash will stop untill i press the pause button twice then it will go again. This will happen about four times during one cycle. I know this sounds silly but do you thin k i need to geyt a new washing machine? I have had this one for about 7 yrs.
THE problem i have is that once i turn on the machine and press fabric button the program lights...
(More)
THE problem i have is that once i turn on the machine and press fabric button the program lights come on and the start/pause button light flashes i press the start/pause button a sound is heard and nothing happens can you help please
start cyle, it makes a noise and then no water loads and it does nothing, checked all filters and...
(More)
start cyle, it makes a noise and then no water loads and it does nothing, checked all filters and water is going in to machine Tks
I need to replace the drum bearing but can not relese the star screw. We used hammer screw driver...
(More)
I need to replace the drum bearing but can not relese the star screw. We used hammer screw driver but doesn,t work. I have drum photo picture suppose sent to you, to what address? Thank you in advance. Best Regards Eddy Empu No 43 Karawaci - Tangerang Indonesia. Email : eddypras@telkom.net
when my washing machine starts to its wash cycle all the lights on the control flash including...
(More)
when my washing machine starts to its wash cycle all the lights on the control flash including the clean filter button which flashes red , the machine also bleeps constantly at this time. I have cleaned what I think is the filter and this keeps happening