http://www.fixya.com/support/p36540-zanussi_f1045w_front_load_washerSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comMon, 07 Dec 2009 21:03:49 GMT80http://www.fixya.com/support/t3438156-light_turn_dial_n_nothing_happens_nolight on, turn dial n nothing happens ..no noise, zilchMon, 07 Dec 2009 21:03:49 GMThttp://www.fixya.com/support/t3393341-noisey_drum_bearings_replaced_zanussinoisey drum, can bearings be replacedMon, 07 Dec 2009 21:03:49 GMThttp://www.fixya.com/support/t2572127-machine_will_not_drainThe washing machine does not drain.Mon, 07 Dec 2009 21:03:49 GMThttp://www.fixya.com/support/t3120282-clothes_coming_out_smeeling_mustymy clothes are coming out smelling musty and my machine is less than 12 months oldMon, 07 Dec 2009 21:03:49 GMThttp://www.fixya.com/support/t2825793-believe_wood_screw_gotI believe that I have a wood screw which has got stuck between the drum and the tub. I have removed the belt drive from the back and tried to ease the drum by knocking the shaft thro the bearing but it is as stiff as before. Have also begun to undo...Mon, 07 Dec 2009 21:03:49 GMThttp://www.fixya.com/support/t2764988-zanussi_f1045w_grinding_when_spinningmy zanussi f1045w is grinding when spinning what could the problem beMon, 07 Dec 2009 21:03:49 GMThttp://www.fixya.com/support/t2477111-zanussi_aquacycle_1000_will_not_drainmy zanussi aquacycle 1000 will not drain and pump is making funny noise have already taken hase going in and coming out of pump off and cant see problemMon, 07 Dec 2009 21:03:49 GMThttp://www.fixya.com/support/t2696195-zanussi_1500_washes_but_doesnt_spinthe washing machine washes but it when it has to spin the drum go round slowly with out spinning.Mon, 07 Dec 2009 21:03:49 GMThttp://www.fixya.com/support/t2537416-zanussi_fs1225w_when_spinning_very_loudmy zanussi fs1225w when spinning is very loud and the hard plastic bit round the drum and between the rubber door seal is bracking away do you know what the problem isMon, 07 Dec 2009 21:03:49 GMThttp://www.fixya.com/support/t2441447-belt_broken_wdt1085_washing_machinehow to fit new beltMon, 07 Dec 2009 21:03:49 GMThttp://www.fixya.com/support/t2098971-loud_banging_in_spin_cycle_zanussi_aquazanussi aqua cycle f 1045 - also have black circular marks on washing so something is coming through the drum. noise is very loud - sounds like lump of metal/concrete is inside the machine! can i repair or should I replace?Mon, 07 Dec 2009 21:03:49 GMThttp://www.fixya.com/support/t1703244-zanussi_wda1055w_washer_dryer_neverI have a Zanussi WDA1055W washer/dryer. I never use the dryer programmes. On a wash programme It seems to be spinning only when it feels like it! Sometimes it will drain and spin fine on one programme, then decide not to bother the next time! So i...Mon, 07 Dec 2009 21:03:49 GMThttp://www.fixya.com/support/t611506-f1045w_spin_probhope i have better luck on here than previous! my machines spin cycle is clicking off as soon as it clicks on when the spin cycle starts the drum spins up but as soon as it begins you can here the relay/ solenoid click back off and the motor slows...Mon, 07 Dec 2009 21:03:49 GMThttp://www.fixya.com/support/t1615412-bearings_need_changingis there a picture manual to do thisMon, 07 Dec 2009 21:03:49 GMThttp://www.fixya.com/support/t1559304-cannot_remove_rear_panel_zanussi_fjr1454I have removed the top and the hex screws on the top and at the rear. I realsie the rear and side panels come off as one but whiel the top seems to be moving the bottom seems solid. I cannot see any other screws to release. I am doing this to change...Mon, 07 Dec 2009 21:03:49 GMThttp://www.fixya.com/support/t1370304-drum_will_not_turnI started a cycle. The drum filled with water as usual but the drum won't turn. It can't be turned manually either.Mon, 07 Dec 2009 21:03:49 GMThttp://www.fixya.com/support/t1361178-fx1365_door_will_not_lock_followed_fourDoor will not lock, lock replaced no change, if lock simulated shut by shorting out grey leads machine will start to fill.Mon, 07 Dec 2009 21:03:49 GMThttp://www.fixya.com/support/t495927-zanussi_wj1054_front_loadMy Zanussi wj1054 Jetstream is 4 years old and has been used on average twice a week. I get a buzz when the on button is pressed then before any programme is selected the water starts coming in and is pumped straight. When a programme is selected the...Mon, 07 Dec 2009 21:03:49 GMThttp://www.fixya.com/support/t1275944-change_drum_bearingsDo I have to split the drum in order to get the bearings out?Mon, 07 Dec 2009 21:03:49 GMThttp://www.fixya.com/support/t490434-door_wont_open_stopped_spinningdoor wont open, stopped spinningMon, 07 Dec 2009 21:03:49 GMThttp://www.fixya.com/support/t427471-washer_wont_spinwasher washes on all programmes drains but will not spinMon, 07 Dec 2009 21:03:49 GMThttp://www.fixya.com/support/t1115538-zanussi_aqualux_washing_machineThe belt linking the motor to the drum needs replacing. how do I fit it?Mon, 07 Dec 2009 21:03:49 GMThttp://www.fixya.com/support/t117695-machine_will_not_empty_or_rinseThe machine is not rinsing out the clothes. It takes in water and appears to run as normal but then it does not drain out the water. I tried using an alternative wash program and it did not take in any water. I am not certain if the problem is that...Mon, 07 Dec 2009 21:03:49 GMThttp://www.fixya.com/support/t366982-fitting_new_belt_zanussi_washung_machineis there an adjustment on da zanusssi model no f1045w front load washing machine for the new belt and if so were is it located ? thanks from a desperate housewifeMon, 07 Dec 2009 21:03:49 GMThttp://www.fixya.com/support/t270962-kenmore_model_110_22802100_drains_butThis is a top load and direct drive washer. I am trying to fix it for my brother. There are no noises when selecter hits the spin cycle position. Washer drains properly just no spin. Can you eliminate possibilities and give a direction to start...Mon, 07 Dec 2009 21:03:49 GMThttp://www.fixya.com/support/t807365-zanussi_f1045w_front_loadMy Zanussi Aquacycle 1000 is taking twice as long as it should to complete a cycle. Also it is not taking the washing powder from the drawer.Mon, 07 Dec 2009 21:03:49 GMThttp://www.fixya.com/support/t669023-door_catch_broken_open_door_from_insideHi my Zanussi F1045 front load washing machine door handle has broken and is loose to pull and it does not open the door from the outside. If I take the top cover off the machine, can I open the door from the inside as I have clothes trapped inside....Mon, 07 Dec 2009 21:03:49 GMThttp://www.fixya.com/support/t375096-zanuusi_brushesMy drum wont rotate on my zanussi washing machine. I think it is the brushes would this be right? Could I fix them on my ownMon, 07 Dec 2009 21:03:49 GMThttp://www.fixya.com/support/t334343-refitting_door_gasket_f1045w_helpas the topic states i need to refit my door seal - having read a couple of posts on using fairy to assist in getting the spring ring on, thats great but before i get to that i cant get the bloody gasket itself on, what am i missing? ive tried using 2...Mon, 07 Dec 2009 21:03:49 GMThttp://www.fixya.com/support/t299853-noisy_spin_cyclemy washing machine makes a really loud noise whenever it starts a fast spin cycle can you tell me what you think the problem could be. thanksMon, 07 Dec 2009 21:03:49 GMT