20 Most Recent Zanussi TC180W Electric Portable Dryer - Page 3 Questions & Answers

Clean the air intake grill t the rear left corner. https://www.manualslib.com/manual/198228/Zanussi-Zdc46130s.html?page=15#manual

Dry bearing and a slipping belt is the most likely reasons. A belt slipping causes vibration and squealing.

Error code 66 on a Zanussi washing machine is a fault code indicating a problem with the control board. The issue could be related to the wiring, the control board itself, or a component connected to the board, such as the heater element. Since you have tested the heater element and found that it appears to be working correctly, it's likely that the issue is with the control board. However, it's always a good idea to double-check all the wiring and connections before replacing any parts. If the problem persists after checking the wiring and connections, it may be necessary to replace the control board. Replacing the control board can be an expensive repair, so it's important to consider the cost of the repair compared to the value of the machine. If the machine is old and the cost of the repair would be more than the value of the machine, it may be more cost-effective to purchase a new machine.

RTM it tells that or google it, sure does. all dryers on earth have spec and a manual and both tell that. by country too.

can be either or something else need to test using a multi meter

I have a galanz airconditioner and is showing an error be there is someone knows what does it means? Thanks

https://www.youtube.com/watch?v=2s5NnqtJGSc

Check the heater. Does it heat?

try out this youtube and see if it works for you? https://www.youtube.com/watch?v=7RzXRKa5ruQ

Have someone take Dryer apart and clean lint out of cabinet. Sounds like it’s trying to catch fire.

Check the idler pulley. Maybe it was installed incorrectly. Not aware of any adjustment capabilities of a dryer belt.

check door micro switch cheers

your on the right ytack and they are normally easy to replace