vNoticesFederal Communications Commission StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions:•This device may not cause harmful interference, and•This device must accept any interference received including interference thatmay cause undesired operation.Canadian Department of Communications StatementThis digital apparatus does not exceed the Class B limits for radio noise emissionsfrom digital apparatus set out in the Radio Interference Regulations of theCanadian Department of Communications.This class B digital apparatus complies with Canadian ICES-003.The use of shielded cables for connection of the monitor to the graphics card isrequired to assure compliance with FCC regulations. Changes or modificationsto this unit not expressly approved by the party responsible for compliancecould void the user’s authority to operate this equipment.Safety informationElectrical safety•To prevent electrical shock hazard, disconnect the power cable from theelectrical outlet before relocating the system.• When adding or removing devices to or from the system, ensure that the powercables for the devices are unplugged before the signal cables are connected. Ifpossible, disconnect all power cables from the existing system before you add adevice.• Before connecting or removing signal cables from the motherboard, ensure thatall power cables are unplugged.• Seek professional assistance before using an adpater or extension cord. Thesedevices could interrupt the grounding circuit.• Make sure that your power supply is set to the correct voltage in your area. If youare not sure about the voltage of the electrical outlet you are using, contact yourlocal power company.• If the power supply is broken, do not try to fix it by yourself. Contact a qualifiedservice technician or your retailer.
Guru