Hi I have a canon IP4000 that is about 4 years old and gets a lot of use. Just recently, I seem to...
(More)
Hi I have a canon IP4000 that is about 4 years old and gets a lot of use. Just recently, I seem to be getting many problems with the black ink tank, which when it is down to about 50% full starts missing horizontal lines down the page. i have tried deep cleaning several times but this only clears the problem for 2-3 pages of print. If you remove the cartridge and shake, vigorously until some ink flies all over the room it then starts to work again but he problem comes back when the ink tank is 25% full and I end up having to replace the ink tank again. I only use canon 3e inks, is there a problem with these inks or does my print head need replacing?
My canon pixma ip4000 has stopped printing. It is going through the motions but the paper is coming...
(More)
My canon pixma ip4000 has stopped printing. It is going through the motions but the paper is coming out blank with nothing on it.
I put in a new cartridge and it said the ink was not alligned properly and I need to refer to my...
(More)
I put in a new cartridge and it said the ink was not alligned properly and I need to refer to my service manual. Can someone please help
Cyan (only) printing streaked, with both old and new printhead. Pixma iP4000. Since it is only one...
(More)
Cyan (only) printing streaked, with both old and new printhead. Pixma iP4000. Since it is only one color, and it does it even with the new printhead, could this be being caused by the printer becoming worn-out?
Hello, My ip4000 has worked well for years, but I now have a problem where even though I've just...
(More)
Hello, My ip4000 has worked well for years, but I now have a problem where even though I've just refilled the ink cartridges, anything red doesn't print properly. Yesterday it printed dark green and today it printed bright yellow! How do I solve this please?
Nothing printing, I only have ink in my 3e cartridge, I am printing to greyscale. I have run a...
(More)
Nothing printing, I only have ink in my 3e cartridge, I am printing to greyscale. I have run a printer head job and the 3e cartridge is working, but when I run a test print nothing prints.
no colour printing at all. cleaned heads, filled tanks with hot water, injected in to m/t tanks, and...
(More)
no colour printing at all. cleaned heads, filled tanks with hot water, injected in to m/t tanks, and soaked. no joy yet
Canon PIXMA iP4000 page of text prints with some (horizontal) lines and sections pale. All ink...
(More)
Canon PIXMA iP4000 page of text prints with some (horizontal) lines and sections pale. All ink cartridges are new/full, and I've run utility with perfect results.
I have a Canon PIXMA iP400 - it refers to the wast ink absorber being nearly full - what does this...
(More)
I have a Canon PIXMA iP400 - it refers to the wast ink absorber being nearly full - what does this mean
Canon printer pixma IP4000 When trying to print blue color, it prints as a purple color. How can I...
(More)
Canon printer pixma IP4000 When trying to print blue color, it prints as a purple color. How can I correct this?